Chemiluminescent ion-molecule reactions in the system C+ + H2

The optical emission resulting from collisions between C⁺ ions and H₂ gas was measured in the energy range 2 to 20 eV_c.m.. The observed spectrum consists mainly of the CH⁺ A ¹Π → X ¹Σ⁺ band system; CH⁺ (A ^fΠ) is shown to be formed in the chemiluminescent reactio: C⁺(²P⁰) + H₂ → CH⁺(A ¹Π) + H(²S). The energy dependence of the emission cross section was measured. The occurrence of this reaction is discussed in terms of a electronic state correlation diagram for the system.     

Study on curing of novolac epoxy resin

The optimization of proportions of novolac epoxy resin, Dobeckot E4 and polyamide hardener, EH411 has been established by DSC and the data indicates that resin-polyamide, 100∶40 and 100∶50, appear to be optimum where ‘extent of cure’ is maximum. The kinetic parameters for these formulations have been evaluated using isothermal and dynamic modes by employing DSC. The rate constants have been evaluated for curing process of these formulations using isothermal DSC mode in the temperature range of 70°–90°C. These have also been predicted at 20°±1°C (room temperature) by extrapolating the data obtained at elevated temperatures. A comparison of the predicted values with the experimental values shows that there is a good agreement between them.     

RED EDGE EXCITATION EFFECT IN INTACT EYE LENS

Shift in the wavelength of emission upon shift in the excitation wavelength towards the red edge of the absorption band is termed Red Edge Excitation Shift (REES). This effect is observed only in situation where the fluorophore mobility with respect to the surrounding matrix is considerably reduced. We have observed such red edge excitation effect in the intact eye lens. The REES observed for a normal lens is different from that seen in a photodamaged lens and hence appears to be a potential tool to monitor the changes in the state of the lens. Photodamage experiments with tryptophan in polyethylene glycol (PEG) and intact eye lens indicate that the red edge photon can also cause photodamage.     

Developing an on-line derivatization of FAs by microwave irradiation coupled to HPLC separation with UV detection

The development of analytical methods for routine simultaneous identification and quantification of carboxylic fatty acids (CFAs) are required in different fields, such as, pharmaceutical cosmetics, food products and formulations of water–microemulsion–oil systems. Determination of CFAs has been developed mainly by gas chromatography (GC). As an alternative to GC, liquid chromatography (LC) has better sensitivity and selectivity. However, most CFAs show no useful absorption in ultraviolet–violet (UV–Vis) region, one of the more used detection technique in high-performance liquid chromatography (HPLC). In order to allow the use of UV–Vis detection, the use of pre-column derivatization has been reported to increase sensitivity and selectivity. Therefore, establishment of a simpler and faster on-line method with complete separation is needed for the screening of large numbers of samples. 2,4-Dinitrophenylhydrazine (2,4-DNPH.), benzoil chloride (BC), and phenylhydrazine (PH) were used for derivatization of different FAs by microwaves radiation (MW). After the on-line derivatization, products were separated and quantified by HPLC. Reactor coil was placed inside of microwaves oven at 450 W. Parameters as flow, amount of reagents, irradiation time, and chromatographic conditions were optimized. The continuous analysis using the MW–HPLC–UV system provided high sensitivity and reduced both the amount of reagent used and the analysis times. This proposed method can be used for the routine analysis of FAs contained in water–microemulsion–oil systems, to quantify the total acid fraction in each phase.     

Homogeneous isotopic exchange between nickel(II) and bis(diethyldithiocarbamato)nickel(II) complex

Isotopic exchange behaviour of bis(diethyldithio carbamate) nickel(II) complex with nickel(II) in chloroform and methanol medium was studied. The studies were carried out at different temperatures varying the concentration of both metal ion and the complex. The results show that the complex is labile in the kinetic sense. Increase in temperature increases the isotopic exchange rate. The increase in concentration also results in enhancement of the rate of reaction.     

Homogeneous isotope exchange between copper/II/ and copper/II/-resacetophenone phenylhydrazone complex

Isotope exchange of copper/II/ between bis/resacetophenone phenylhydrazone/ copper/II/ complex and copper/II/ in trin-butyl phosphate and methanol medium was studied. The experiments were carried out at different temperatures varying the concentration of both metal ion and the complex. The results show that the complex is kinetically labile. An increase in temperature increases the rate of isotope exchange. The increase in concentration also results in the enhancement of the rate of reaction.     

Kombination wirksamer Trennverfahren mit modernen analytischen Methoden in der Naturstoffchemie

Zusammenfassung Aus Crotonöl konnten durch Anwendung multiplikativer Verteilungs- und chromatographischer Verfahren die entzündlichen und cocarcinogenen Substanzen A1–A4 und B1–B7 rein dargestellt werden. Diese Substanzen sind Diester des polyfunktionellen Diterpenalkohols Phorbol, C₂₀H₂₈O₆ mit jeweils einer kurzkettigen (Essig-, (+)-S-2-Methylbutter-, Tiglinsäure) und einer langkettigen Fettsäure (Capryl-, Caprin-, Laurin-, Myristin-, Palmitinsäure). Die Teilsynthese einiger Substanzen wird angegeben. Aus den UV-, IR- und KMR-Daten und chemischen Befunden werden Teilformeln für Phorbol abgeleitet und diskutiert.

---

Summary The compounds A1–A4 and B1–B 7 have been isolated from croton oil in pure state by multiplicative distribution and chromatography. These compounds are di-esters of the polyfunctional diterpene alcohol phorbol C₂₀H₂₈O₆ each with a short chain (acetic-, (+)-S-2-methyl-butanoic-, tiglic acid) and a long chain fatty acid (octanoic-, decanoic-, dodecanoic-, tetradecanoic-, hexadecanoic acid). The partial synthesis of some compounds is described. From ultraviolet-, infrared-, nmr-spectra and from chemical evidence partial structures for phorbol are being discussed.

---

---

Für die Messung von KMR-, Massen- und CD-Spektren und anregende Diskussionen danken wir den Herren Dr. J. Sonnenbichler, München, Dr. J. Jochems, Heidelberg, Dr. A. Mannschreck, Heidelberg, Dr. H. Budzikiewicz, Braunschweig, Dipl.-Chem. C. Wünsche, Heidelberg, Doz. Dr. G. Snatzke, Bonn, und V. Scheidel, Heidelberg.

---

Vorgetragen von H. Kubinyi.     

Spectrophotometric estimation of ketotifen fumarate in pharmaceutical formulations

Four simple and sensitive spectrophotometric methods (A–D) for the determination of Ketotifen fumarate in bulk samples and pharmaceutical formulations are described. They are based on the formation of coloured species by the coupling of the diazotised sulphanilamide with the drug (method A, _max 520 nm) or by oxidizing it with excessN-bromo-succinimide and determining the consumed NBS with decrease in colour intensity of celestine blue (method B: _max 540 nm) or by the reduction of Folin-Ciocalteau reagent (method C: _max 720 nm) or by the formation of a chloroform-soluble, coloured ionassociation complex between the drug and Azocarmine G at pH 1.5 (method D: _max 540 nm). Regression analysis of Beer-Lambert plots showed good correlations in the concentration ranges 1–10, 2–12, 4–28 and 2.5–25 g/ml for methods A–D, respectively. The validity of the proposed methods was tested by analysing pharmaceutical formulations containing KTF: the relative standard deviations were within ±1.0%. Recoveries were 98.9–100.2%.     

Tetramethyldisilan-1,2-diyl-verbrückte Dicyclopentadienyl-und Diindenylmetalldichloride der 4. Gruppe – Kristallstruktur von

Tetramethyldisilane-1,2-diyl bridged Dicyclopentadienyl and Diindenyl Metal Dichlorides of the Group 4 Metals – Crystal Structure of Dicyclopentadienyl and diindenyl metal dichlorides of the type Cp′? SiMe₂SiMe₂? Cp′MCl₂ (Cp′ = C₅H₄, M = Ti ( 1 ), Zr ( 2 ), Hf ( 3 ); Cp′ = C₉H₇, M = Zr ( 4 ), Hf ( 5 )) were synthesized and characterized by means of their ¹H, ¹³C, ²⁹Si-n.m.r., MS, and IR spectra. The crystal structure of 2 was determined.     

Structure of the 18-Crown-6 Complex with Ammonium Hexafluorosilicate and Water

The crystalline host–guest type complex [(18-crown-6NH₄)₂][SiF₆]4H₂Ohas been obtained as the result of the interaction of SiF₄2NH₃ with 18-crown-6 (18C6) in an aqueous medium. Crystal data: monoclinic, space groupC 2 c, a=26.541(2), b=8.363(2), c=20.469(2) Å, = 122.43(1)°and Z=4. The final R-value is 0.070 for 3253 reflections with I 2(I).The crystals consist of the complex [NH₄18C6]⁺ cations, [SiF₆]^2-anions and water molecules. The ammonium cation is hydrogen bonded by three of its H-atoms to the crown ether oxygen atoms with N(1) O separations2.923(5)–2.940(5) Å and by the fourth H-atom to the fluorine atom of thehexafluorosilicate anion, the N(1)F(4) distance being 2.797(6) Å.The conformation of the macrocycle and the hydrogen-bond geometry in thecomplex cation closely resemble those in related adducts between 18-crown-6and ammonium salts. All crystal components are connected via a system of hydrogen bonds into a ribbon along the b axis in the unit cell.