Supermolecular Columnar Liquid‐Crystalline Phosphorus Dendrimers Decorated with Sulfonamide Derivatives

A series of supermolecular liquid crystals has been synthesized by combining phosphorus dendrimers of the zero, first, and fourth generations with sulfonamide derivatives, thus generating dendromesogens bearing 6, 12, and 96 mesogenic units on their surfaces. The relevant reactions could be monitored by ¹H, ¹⁹F, and ³¹P{¹H} NMR spectroscopies. The thermal and mesomorphic properties of the products have been studied by optical microscopy, differential scanning calorimetry, and X‐ray diffraction. All of the new macromolecules prepared in this work have been found to show mesomorphic properties over a wide temperature range; moreover, for all of the compounds, the columnar mesophases observed were maintained or vitrified at room temperature. On increasing the generation of these dendromesogens, mesophases appear at lower temperatures and remain stable over a wider temperature interval. In all cases, on the basis of X‐ray analysis, a cylindrical symmetry of the molecules can be proposed to promote the supramolecular columnar arrangement observed in the mesophases. In this type of model, the height of the dendrimer clearly increases with increasing dendrimer generation, whereas its cross‐ sectional area increases only slightly, probably due to compression of the highly hyperbranched structures as a consequence of their progressive steric constraints. The mesomorphic arrangement is governed by the peripheral sulfonamide units.     

Transport properties of ephedrine hydrochloride through poly(vinyl alcohol) matrices—a simple method for enantiomeric differentiation

Equilibrium and transport properties have been investigated of ephedrines, a class of sympathomimetic amines, through cryogel membranes of poly(vinyl alcohol) (PVA). The effect of the PVA (10 to 18 % (w/v)) on the release properties of (1S,2R)-(+)-ephedrine hydrochloride has been discussed on the basis of partition–diffusion and power-law models. The effect of PVA concentration on the swelling degree of PVA–ephedrine matrices have been measured, allowing the estimation of the volume fraction of polymer in the gel. Ephedrine release rate constants, computed by using a first-order kinetics approach, have been modeled by using free-volume and hydrodynamic-scaling models. Differences in the release properties of the ephedrine isomers, (1S,2R)-(+)- and (1R,2S)-(?)-ephedrine as their hydrochlorides, have also been studied at different temperatures. The release kinetic constants and the corresponding activation energies show a marked discrimination between the two ephedrine isomers. This suggests that PVA cryogel membranes possess high potential for enantiomeric differentiation.     

Environmentally friendly synthesis of noble metal nanoparticles assisted by biodegradable dextran‐graft‐lactone copolymers

A simple “green synthesis” of noble metal nanoparticles by direct reaction between Dextran‐graft‐lactone copolymers and metal salts without the need to separately add reducing and stabilizing agents was carried out. The effects of the composition, molecular weights of copolymers and solvents on the characteristics of the nanoparticles were considered. The amphiphilic character of the copolymers seems to be an important factor in the results of the synthesis. According to the results, general correlations between experimental parameters of synthesis and characteristics of the obtained nanoparticles were established. Techniques such as, transmission electron microscopy, scanning electron microscopy, UV–visible spectroscopy, Zeta Potential, dynamic light scattering and Fourier transform Infrared Spectroscopy, were used for the characterization of the products. The results indicate the possibility of control of the characteristics of the nanostructured material. Copyright © 2014 John Wiley & Sons, Ltd.     

Formulation of Aluminum Chloride Phthalocyanine in Pluronic™ P‐123 and F‐127 Block Copolymer Micelles: Photophysical properties and Photodynamic Inactivation of Microorganisms

Aluminum Chloride Phthalocyanine (AlPcCl) can be used as a photosensitizer (PS) for Photodynamic Inactivation of Microorganisms (PDI). The AlPcCl showed favorable characteristics for PDI due to high quantum yield of singlet oxygen (Φ_Δ) and photostability. Physicochemical properties and photodynamic inactivation of AlPcCl incorporated in polymeric micelles of tri‐block copolymer (P‐123 and F‐127) against microorganisms Staphylococcus aureus, Escherichia coli and Candida albicans were investigated in this work. Previously, it was observed that the AlPcCl undergoes self‐aggregation in F‐127, while in P‐123 the PS is in a monomeric form suitable for PDI. Due to the self‐aggregation of AlPcCl in F‐127, this formulation did not show any effect on these microorganisms. On the other hand, AlPcCl formulated in P‐123 was effective against S. aureus and C. albicans and the death of microorganisms was dependent on the PS concentration and illumination time. Additionally, it was found that the values of PS concentration and illumination time to eradicate 90% of the initial population of microorganisms (IC₉₀ and D₉₀, respectively) were small for the AlPcCl in P‐123, showing the effectiveness of this formulation for PDI.     

Influence of Ag+ on the Magnetic Response of [2.2.2]Paracyclophane: NMR Properties of a Prototypical Organic Host for Cation Binding Based on DFT Calculations

The complexation of metal cations into a host–guest situation is particularly well exemplified by [2.2.2]paracyclophane and Ag^I, which leads to a strong cation–π interaction with a specific face of the host molecule. Through this study we sought a deeper understanding of the effects the metal center has on the NMR spectroscopic properties of the prototypical organic host, generating theoretical reasons for the observed experimental results with an aim to determine the role of the cation–π interaction in a host–guest scenario. From an analysis of certain components of the induced magnetic field and the ¹³C NMR shielding tensor under its own principal axis system (PAS), the local and overall magnetic behavior can be clearly described. Interestingly, the magnetic response of such a complex exhibits a large axis-dependent behavior, which leads to an overall shielding effect for the coordinating carbon atoms and a deshielding effect for the respective uncoordinated counterparts, evidence that complements previous experimental results. This proposed approach can be useful to gain further insight into the local and overall variation of NMR shifts for host–guest pairs involving both inorganic and organic hosts.     

Analytical potential of a laser ablation–glow discharge–optical emission spectrometry system for the analysis of conducting and insulating materials

The analytical capabilities of a glow discharge (GD) as a secondary source for excitation/ionization of the material provided by laser ablation (LA) have been compared to conventional laser induced breakdown spectroscopy (LIBS). In LA–GD both sources can be independently adjusted to optimize the sampling process and then its subsequent excitation. This could involve a number of analytical performance advantages, such as reduced matrix dependence, greater precision and sensitivity than those encountered in LIBS. For such purpose, an ablation chamber design including two electrodes to generate the GD discharge has been built and assayed. A comparison between LIBS and LA–GD–OES has been carried out, both, under reduced argon and helium atmospheres. Different sets of samples (conducting reference materials, glass and fluorine pellets) have been used to evaluate the novel coupled technique. The LA–GD coupled system has shown to provide lower detection limits. In addition, best linear correlations between intensities and concentrations and lower matrix effects have also been found using the coupled system. Moreover, special advantages of the LA–GD–OES have also been demonstrated for the analysis of fluorine.     

Designing Molecular Printboards: A Photolithographic Platform for Recodable Surfaces

A light induced strategy for the design of β‐cyclodextrin (CD) based supramolecular devices is introduced, presenting a novel tool to fabricate multifunctional biointerfaces. Precision photolithography of a modified β‐CD was established on a light sensitive tetrazole surface immobilized on a bioinspired polydopamine (PDA) anchor layer via various shadow masks, as well as via direct laser writing (DLW), in order to craft any desired printboard design. Interfacial molecular recognition provided by light generated cavitate domains was demonstrated via spatially resolved encoding, erasing, and recoding of distinct supramolecular guest patterns. Thus, the light directed shaping of receptor monolayers introduces a powerful path to control supramolecular assemblies on various surfaces.     

Non‐Invasive Salivary Electrochemical Quantification of Paraquat Poisoning Using Boron Doped Diamond Electrode

The present work describes the first electrochemical method for quantifying paraquat herbicide poisoning in human saliva samples. Paraquat shows two couples of well‐defined peaks in aqueous solution using a boron doped diamond (BDD) electrode. By using square wave voltammetry (SWV) technique under optimum experimental conditions, a linear analytical curve was obtained for paraquat concentrations ranging from 0.800 to 167 µmol L^?1, with a detection limit of 70 nmol L^?1. This method was applied to quantify paraquat spikes in human saliva samples and in two different water samples (tap and river). The recovery values obtained ranged from 83.0 to 104 % and 99.1 to 105 %, respectively, which highlight the accuracy of the proposed method.