内埋炸药下超高韧性水泥基复合材料的抗爆性能

为研究超高韧性水泥基复合材料(ultra-high toughness cementitious composites, UHTCC)在内埋炸药爆炸下的抗爆性能和损伤破坏规律,对不同炸药埋深下的UHTCC和高强混凝土(high-strength concrete, HSC)进行了内埋炸药抗爆实验。得到了两种材料靶体的破坏状态,并利用接触爆炸的实验结果计算出了两种材料的抗爆性能参数。结果表明,在相同条件下,UHTCC抗爆性能优于高强混凝土。为了进一步探究UHTCC的抗压强度、抗拉强度以及拉伸韧性对靶体在内埋炸药下抗爆性能的影响,首先,采用改进的K&C模型对炸药埋深为40 mm的超高韧性水泥基复合材料靶体进行数值模拟,模拟结果与实验结果基本吻合,并根据数值模拟的结果得到了爆炸冲击波沿靶体径向衰减速度大于轴向衰减速度这一规律,验证了数值模型的有效性;然后,通过调整改进K&C模型中与抗压强度、抗拉强度以及拉伸韧性相关的参数,数值预测了不同抗压强度、抗拉强度以及拉伸韧性下UHTCC靶体的破坏状态,发现增强UHTCC的韧性可以有效防止靶体发生整体性破坏,增大UHTCC的抗拉强度可以减小靶体迎爆面的开坑直径,增大UHTCC的抗压强度对减小开坑直径效果不明显。     

Investigation of structural and electronic properties of β- HgS: Molecular dynamics simulations

The pressure induced phase transition of β-HgS is studied using an ab initio molecular dynamics simulation. The structural phase transformation from the zinc-blende structure to the NaCl-type structure (space group $Fm\overline{3}m$) and from this structure to CsCl-type structure ($Pm\overline{3}m$) with the application of hydrostatic pressure is predicted. Additionally, the electronic properties of HgS and various physical properties such as the lattice constants, the bulk modulus and the pressure derivative of the bulk modulus are revealed. Furthermore, these phase transitions are obtained using the total energy and enthalpy calculations. According to these calculations these transformations are occurring at about 20?GPa and 28?GPa for $F\overline{4}3m$ →$Fm\overline{3}m$ and $Fm\overline{3}m$ →$Pm\overline{3}m$, respectively.     

Post-Harvest Operations to Generate High-Quality Medicinal Cannabis Products: A Systemic Review

The traditional Cannabis plant as a medicinal crop has been explored for many thousands of years. The Cannabis industry is rapidly growing; therefore, optimising drying methods and producing high-quality medical products have been a hot topic in recent years. We systemically analysed the current literature and drew a critical summary of the drying methods implemented thus far to preserve the quality of bioactive compounds from medicinal Cannabis. Different drying techniques have been one of the focal points during the post-harvesting operations, as drying preserves these Cannabis products with increased shelf life. We followed or even highlighted the most popular methods used. Drying methods have advanced from traditional hot air and oven drying methods to microwave-assisted hot air drying or freeze-drying. In this review, traditional and modern drying technologies are reviewed. Each technology will have different pros and cons of its own. Moreover, this review outlines the quality of the Cannabis plant component harvested plays a major role in drying efficiency and preserving the chemical constituents. The emergence of medical Cannabis, and cannabinoid research requires optimal post-harvesting processes for different Cannabis strains. We proposed the most suitable method for drying medicinal Cannabis to produce consistent, reliable and potent medicinal Cannabis. In addition, drying temperature, rate of drying, mode and storage conditions after drying influenced the Cannabis component retention and quality.     

Diffusion of dextran within poly(methacrylic acid) hydrogels

We describe an investigation of fluorescence correlation spectroscopy into the diffusion of fluorescein‐tagged dextran (FDEX) in a poly(methacrylic acid) (PMAA) hydrogel. The temperature dependence of FDEX diffusion is shown to follow Zimm behavior in pure water, and the decrease in the diffusion coefficient when in the PMAA hydrogel has been modeled. The addition of acid and alkali (HCl and NaOH, respectively) not only control the swelling and collapse of the hydrogel but also reveal a strong pH dependence of the dextran diffusion coefficient, which shows a (nonmonatonic) increase with pH. The addition of NaCl and CaCl₂ salts similarly showed evidence of network swelling, most notably at low salt concentration, but also that the diffusion coefficient within the gel at these low concentrations is larger than that in the equivalent solution without the hydrogel, indicating that the combination of hydrogel and salt works to increase the diffusion coefficient above that in pure water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

A Regularization Technique for a Class of Singular Integral Problems

We discuss here a method for the extraction of the singularparts of a variety of problems involving singular integrands.The method is based on the systematic use of a partial fractionidentity; we give here applications to numerical quadratureand to the solution of singular integral equations of variouskinds.     

Detecting electronic states at stacking faults in magnetic thin films by tunneling spectroscopy

Co islands grown on Cu(111) with a stacking fault at the interface present a conductance in the empty electronic states larger than the Co islands that follow the stacking sequence of the Cu substrate. Electrons can be more easily injected into these faulted interfaces, providing a way to enhance transmission in future spintronic devices. The electronic states associated with the stacking fault are visualized by tunneling spectroscopy, and its origin is identified by band structure calculations.     

Recent trends in ultra‐fast HPLC: New generation superficially porous silica columns

New generation columns, i.e. packed with superficially porous silica particles are available as trade names with following manufacturers: Halo, Ascentis Express, Proshell 120, Kinetex, Accucore, Sunshell, and Nucleoshell. These provide ultra‐fast HPLC separations for a variety of compounds with moderate sample loading capacity and low back pressure. Chemistries of these columns are C₈, C₁₈, RP‐Amide, hydrophilic interaction liquid chromatography, penta fluorophenyl (PFP), F5, and RP‐aqua. Normally, the silica gel particles are of 2.7 and 1.7 μm as total and inner solid core diameters, respectively, with 0.5‐μm‐thick of outer porous layer having 90 Å pore sizes and 150 m²/g surface area. This article describes these new generation columns with special emphasis on their textures and chemistries, separations, optimization, and comparison (inter and intra stationary phases). Besides, future perspectives have also been discussed.     

Some natural aqueous extracts of plants as green inhibitor for carbon steel corrosion in 0.5 M sulfuric acid

The inhibiting impact of natural aqueous extracts of some plants such as curcumin, parsley and cassia bark extracts for the corrosion of carbon steel (C-steel) in 0.5 M H₂SO₄ solution was inspected utilizing some techniques such as galvanostatic and potentiodynamic anodic polarization and weight loss measurements. Outcomes indicated that the percentage inhibition efficiency increases with increasing the concentration of the extract due to its horizontal adsorption on the C-steel surface. The process of adsorption is followed by the Temkin isotherm. These natural extracts acted as pitting corrosion inhibitors by shifting the pitting potential to more noble values. The sequence of inhibition efficiency of the natural extracts decreases in the following order: cassia bark extract > parsley extract > curcumin extract. This arrangement is related to the molecular size of the major components of the three natural extracts used.