Theoretical investigation of the Anti-Parkinson drug rasagiline and its salts: conformations and infrared spectra

The conformational analysis of rasagiline [N-propargyl-1(R)-aminoindan] was performed by the density functional theory (DFT) B3LYP method using the 6–31++G (d,p) basis set. A single point energy calculations based on the B3LYP optimized geometries were also performed at MP2/6-31++G (d, p) level. The vibrational frequencies of the most stable conformer of rasagiline was calculated at the B3LYP level and vibrational assignments were made for normal modes on the basis of scaled quantum mechanical force field (SQM) method. The influence of mesylate and ethanedisulfonate salts on the geometry of rasagiline free base and its normal modes are also discussed.      

The first bis(orotato–N,O) complex: Synthesis,crystal structure,spectroscopic and thermal characterization of (chaH)2[Cu(HOr–N,O)2(cha)] · 2H2O (cha = cyclohexylamine and HOr = orotate(2−))

The novel bis(cyclohexylaminium) cyclohexylaminebis(orotate–N,O)cuprate(II) dihydrate, (C₆H₁₅N)₂[Cu(C₅H₂N₂O₄)₂(C₆H₁₄N)] · 2H₂O, has been prepared and characterized by elemental analysis, magnetic measurements, FT-IR and UV–Vis spectroscopy, thermal analysis and X-ray diffraction. The Cu(II) complex crystallizes in the monoclinic space group P2₁/c. The copper atom in the five-coordinated (chaH)₂[Cu(HOr–N,O)₂(cha)] · 2H₂O is chelated by a deprotonated pyrimidine nitrogen atom and carboxylate oxygen atom as a bis(bidentate) ligand and the cyclohexylamine ligand completes the square-pyramidal coordination. The thermal decomposition of the complex has been predicted by the help of thermal analysis (TG, DTG and DTA).     

Synthesis of novel unsymmetrical phthalocyanines substituted with crown ether and nitro groups

This work reports on the synthesis of new unsymmetrically substituted phthalocyanines (M = Zn, Cu, Co, Ni) bearing three benzo-15-crown-5 units through oxy bridges and a nitro group. Phthalocyanines were prepared by a statistical condensation of 4-nitro phthalonitrile and 1-{[(benzo-15-crown-5)-4′-yl]oxy}phthalonitrile in the presence of anhydrous metal salts. All the target unsymmetrical phthalocyanines were separated by column chromatography and characterized elemental analyses, ¹H NMR, IR, mass and UV–Vis spectral data. Electrochemical behaviors of Cu (II) phthalocyanine by cyclic voltammetry and differential pulse voltammetry techniques gave two common phthalocyanine ring reductions and one ring oxidation processes. Peak-to-peak separation of the processes II and III (388 mV) and the measure of gap (1.672 V) between the HOMO and LUMO for the complex, fits a phthalocyanine with electrochemically inactive metal center.     

The synthesis and characterization of a new (<Emphasis Type="Italic">E,E</Emphasis>)-dioxime containing 13-membered dithiadiazamacrocyclic moieties and its mononuclear complexes

A new (E,E)-dioxime, (6Z,7Z)-15,16-dihydro-14H-dibenzo[b,h][1,10,4, 7]dithiadiazacyclotride-cine-6,7(5H,8H)-dionedioxime (H ₂ L) has been synthesized by reacting cyanogen-di-N-oxide (2) with 2,2′-[propane-1,3-diylbis(thio)]dianiline (1). Mononuclear complexes (4) and (5) of this ligand have been synthesized by reacting the vic-dioxime (H₂L) with NiCl₂ · 6H₂O and CoCl₂ · 6H₂O, respectively. The BF ₂ ⁺ capped Ni(II) and Co(III) complexes (6) and (7) of the dioxime have been synthesized from (4) and (5). The new compounds were characterized by a combination of elemental analysis, ¹H- and ¹³C-n.m.r, i.r. and m.s. spectral data.     

Synthesis, characterization and aggregation behaviour of novel peripherally tetra-substituted octacationic water soluble metal-free and metallophthalocyanines

In this study, a new phthalonitrile derivative 3 bearing 1,3-bis[3(dimethylamino)phenoxy]propan-2-ol 1, metal-free phthalocyanine (Pc) 4, metallophthalocyanines (MPcs) 5–7 and their quaternized derivatives 4a–7a were synthesized. Metal-free Pc 4 was prepared by cyclotetramerization of phthalonitrile derivate 3 and MPcs 5–7 were synthesized by heating 3 with NiCl₂, CoCl₂ and CuCl₂ in n-pentanol in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene, respectively. Quaternization of the dimethylamino functionality produced quaternized octacationic water soluble metal-free, Ni, Co and Cu Pcs which were soluble in water, DMF, DMSO. The aggregation behaviour of these compounds were investigated in different concentrations of chloroform for metal-free, Ni, Co and Cu Pcs. The effect of solvents on absorption spectra were studied in various organic solvents. The novel compounds were characterized using IR, ¹H-, ¹³C NMR, UV–vis and MS spectral data.     

Electrical and interface state density properties of polyaniline–poly-3-methyl thiophene blend/p-Si Schottky barrier diode

We have formed conjugated polymeric aniline–thiophene organic material on p-Si substrate by adding polyaniline–poly-3-methyl thiophene blend solution in acetonitrile on top of a p-Si substrate and then evaporating the solvent. It has been seen that the forward bias current–voltage (I–V) characteristics of polyaniline–poly-3-methyl thiophene blend/p-Si/Al with a barrier height value of 0.60 eV and an ideality factor value of 3.37 showed rectifying behaviour at room temperature. The polyaniline–poly-3-methyl thiophene blend/p-Si/Al Schottky barrier diode showed non-ideal I–V behaviour with the value of ideality factor greater than unity that could be ascribed to the interfacial layer, interface states and series resistance. Furthermore, Cheung's functions and modified Norde's function were used to extract the diode parameters including ideality factor, barrier height and series resistance. It has been seen that there is a good agreement between the barrier height values from all methods. However, the values of series resistance obtained from Cheung's functions is higher than the values obtained from Norde's functions. The energy distribution of interface states density, determined from forward bias current–voltage (I–V) characteristic technique at room temperature, increases exponentially with bias from 2.81 × 10¹⁶ cm^?2 eV^?1 in (0.73–E_v) eV to 1.14 × 10¹⁷ cm^?2 eV^?1 in (0.48–E_v) eV.     

Simultaneous determination of seven phthalic acid esters in beverages using ultrasound and vortex‐assisted dispersive liquid–liquid microextraction followed by high‐performance liquid chromatography

A sensitive, rapid, and simple high‐performance liquid chromatography with UV detection method was developed for the simultaneous determination of seven phthalic acid esters (dimethyl phthalate, dipropyl phthalate, di‐n‐butyl phthalate, benzyl butyl phthalate, dicyclohexyl phthalate, di‐(2‐ethylhexyl) phthalate, and di‐n‐octyl phthalate) in several kinds of beverage samples. Ultrasound and vortex‐assisted dispersive liquid–liquid microextraction method was used. The separation was performed using an Intersil ODS‐3 column (C₁₈, 250 × 4.6 mm, 5.0 μm) and a gradient elution with a mobile phase consisting of MeOH/ACN (50:50) and 0.2 M KH₂PO₄ buffer. Analytes were detected by a UV detector at 230 nm. The developed method was validated in terms of linearity, limit of detection, limit of quantification, repeatability, accuracy, and recovery. Calibration equations and correlation coefficients (> 0.99) were calculated by least squares method with weighting factor. The limit of detection and quantification were in the range of 0.019–0.208 and 0.072–0.483 μg/L. The repeatability and intermediate precision were determined in terms of relative standard deviation to be within 0.03–3.93 and 0.02–4.74%, respectively. The accuracy was found to be in the range of –14.55 to 15.57% in terms of relative error. Seventeen different beverage samples in plastic bottles were successfully analyzed, and ten of them were found to be contaminated by different phthalic acid esters.     

In vivo biodistribution of <Superscript>131</Superscript>I labeled bleomycin (BLM) and isomers (A2 and B2) on experimental animal models

Bleomycins (BLMs; BLM, A2, and B2) were labeled with ¹³¹I and radiopharmaceutical potentials were investigated using animal models in this study. Quality control procedures were carried out using thin layer radiochromatography (TLRC), high performance liquid chromatography (HPLC), and liquid chromatography (LC/MS/MS). Labeling yields of radiolabeled BLMs were found to be 90, 68, and 71%, respectively. HPLC chromatograms were taken for BLM and cold iodinated BLM (¹²⁷I-BLM). Five peaks were detected for BLM and three peaks for ¹²⁷I-BLM in the HPLC studies. Two peaks belong to isomers of BLM. The isomers of BLM were purified with using HPLC. Biological activity of BLM was determined on male Albino Wistar rats by biodistribution and scintigraphic studies were performed for BLMs by using New Zelland rabbits. The biodistribution results of ¹³¹I-BLM showed high uptake in the stomach, the bladder, the prostate, the testicle, and the spinal cord in rats. Scintigraphic results on rabbits agrees with that of biodistributional studies on rats. The scintigraphy of radiolabeled isomers (¹³¹I-A2 and ¹³¹I-B2) are similiarly found with that of ¹³¹I-BLM.     

Spectrophotometric determination of cyclotrimethylenetrinitramine (RDX) in explosive mixtures and residues with the Berthelot reaction

On-site colorimetric methods are a valuable, cost-effective tool to assess the nature and extent of contamination in remediated sites and to enable on-site screening for police criminology laboratories. The existing colorimetric method for cyclotrimethylenetrinitramine (RDX) based on a Griess reaction suffers from the non-quantitative reduction to nitrite and from the unstable character of HNO₂ in acidic medium. Thus we propose a novel spectrophotometric RDX assay in explosive mixtures and residues, based on (Zn + HCl) reduction of RDX in a microwave oven, followed by neutralization of the reduction products to ammonia and low molecular-weight amines, and Berthelot reaction of these amine-compounds with phenol and hypochlorite in alkaline medium to give an intensely blue indophenol dye absorbing at 631 nm. The molar absorptivity and limit of detection (LOD) for RDX were (1.08 ± 0.04) × 10⁴ L mol⁻¹ cm⁻¹ and 0.18 mg L⁻¹, respectively. Application of the method to synthetic mixture solutions of RDX and trinitrotoluene (TNT) at varying proportions showed that there was minimal interference from TNT (which could be compensated for by dicyclohexylamine colorimetry), since the Berthelot reaction was essentially non-responsive to m-substituted anilines derived from TNT upon (Zn + HCl) reduction. The proposed method was successfully applied to military-purpose explosive mixtures of (RDX + inert matter) such as Comp A5, Comp C4, and Hexal P30, and to (RDX + TNT) mixtures such as Comp B. The molar absorptivity of RDX was much higher than that of either ammonium or nitrate; RDX could be effectively separated from ammonium and nitrate in soil mixtures, based on solubility differences. The Berthelot method for RDX was statistically validated using Comp B mixtures against standard HPLC equipped with a Hypersil C-18 column with (40% MeOH-60% H₂O) mobile phase, and against gas chromatography-thermal energy analysis (GC-TEA) system.