Evaluation of piezoelectric PVDF polymers for use in space environments. III. Comparison of the effects of vacuum UV and gamma radiation

Films of piezoelectric PVDF and P(VDF‐TrFE) were exposed to vacuum UV (115–300 nm VUV) and γ‐radiation to investigate how these two forms of radiation affect the chemical, morphological, and piezoelectric properties of the polymers. The extent of crosslinking was almost identical in both polymers after γ‐irradiation, but surprisingly, was significantly higher for the TrFE copolymer after VUV‐irradiation. Changes in the melting behavior were also more significant in the TrFE copolymer after VUV‐irradiation due to both surface and bulk crosslinking, compared with only surface crosslinking for the PVDF films. The piezoelectric properties (measured using d₃₃ piezoelectric coefficients and D‐E hysteresis loops) were unchanged in the PVDF homopolymer, while the TrFE copolymer exhibited more narrow D‐E loops after exposure to either γ‐ or VUV‐radiation. The more severe damage to the TrFE copolymer in comparison with the PVDF homopolymer after VUV‐irradiation is explained by different energy deposition characteristics. The short wavelength, highly energetic photons are undoubtedly absorbed in the surface layers of both polymers, and we propose that while the longer wavelength components of the VUV‐radiation are absorbed by the bulk of the TrFE copolymer causing crosslinking, they are transmitted harmlessly in the PVDF homopolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3253–3264, 2006     

Effects of processing on the structure of zein/oleic Acid films investigated by x-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 A, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5 A d-spacing remained stable under processing while the 10 A d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 A) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods. Structural model for a zein molecular aggregate (based on Matsushima et al.10). Rectangular prisms of individual zein molecules are hexagonally aligned parallel to each other.     

3β‐(Stearyloxy)olean‐12‐ene from Austroplenckia populnea: Structure Elucidation by 2D‐NMR and Quantitative 13C‐NMR Spectroscopy

3β‐(Stearyloxy)olean‐12‐ene was isolated from a hexane extract of Austroplenckia populnea Reiss (Celastraceae) leaves. The structure was solved by means of quantitative ¹³C‐NMR, HMBC, HMQC, COSY, NOESY, and NOE difference spectra. The mass spectrum showed an [M+1]⁺ ion peak at m/z 693, and the molecular formula C₄₈H₈₄O₂ was confirmed by combustion analysis.     

Trace and major elements in serum of patients with chronic myelogenous leukemia

Summary Major and trace elements were determined in serum of patients with chronic myelogenous leukemia (CML) using total reflection X-ray fluorescence induced by synchrotron radiation (SRTXRF). CML affects 1 to 2 people per 100,000 and accounts for 7-20% cases of leukemia. It was possible to determine the concentrations of the following elements: P, S, Cl, K, Ca, Cr, Mn, Fe, Ni, Cu, Zn, Br and Rb. Using analysis of variance (ANOVA) it was observed that the contents of the P, S, Ca, Cr, Mn, Fe, Cu and Rb elements differed significantly at a = 0.05 between groups of healthy subjects and CML patients and also genders (males and females).     

Xylanolytic enzyme production by anAspergillus niger isolate

Production of xylanolytic enzymes by anAspergillus niger CCMI 850 isolate was investigated in batch cultures. The effect of the composition of a fermentation medium that did not include chemical inducers, on β-xylanase, β-xylosidase, α-l-arabinofuranosidase, and total cellulase activity was studied. With 4% xylan as the carbon source, about 65 U/mL of β-xylanase was obtained, whereas the total cellulase activity was undetectable, under the specified conditions. This β-xylanase activity represents the highest reported for a wild-type strain ofA. niger. The effect of pH and temperature on the activity of β-xylanase was studied. Partial characterization of the β-xylanase showed that with insoluble birchwood as substrate theK _m andV _max were 0.3 mM and 19 μmol/min, respectively. Aspects of using the crude β-xylanase preparation for applications in the pulp and paper industry were discussed.     

Initiation of polymer degradation via transfer of infectious species

A novel dual stage chemiluminescence detection system incorporating individually controlled hot stages has been developed and applied to probe for material interaction effects during polymer degradation. Utilization of this system has resulted in experimental confirmation for the first time that in an oxidizing environment a degrading polymer A (in this case polypropylene, PP) is capable of infecting a different polymer B (in this case polybutadiene, HTPB) over a relatively large distance. In the presence of the infectious degrading polymer A, the thermal degradation of polymer B is observed over a significantly shorter time period. Consistent with infectious volatiles from material A initiating the degradation process in material B it was demonstrated that traces (micrograms) of a thermally sensitive peroxide in the vicinity of PP could induce degradation remotely. This observation documents cross-infectious phenomena between different polymers and has major consequences for polymer interactions, understanding fundamental degradation processes and long-term aging effects under combined material exposures.     

Ion-pair formation observed in a pulsed-field ionization photoelectron spectroscopic study of HF

The pulsed-field ionization (PFI) photoelectron (PE) spectrum of HF has been recorded at the chemical dynamics beamline of the advanced light source over the photon energy range 15.9-16.5 eV using a time-of-flight selection scheme at a resolution of 0.6 meV. Rotationally-resolved structure in the HF+(X 2 pi 3/2, 1/2, v+ = 0, 1) band systems are assigned. The spectral appearance of these systems agrees with a previous VUV laser PFI-PE study. Importantly, extensive rotationally-resolved structure between these two vibrational band systems is also observed. This is attributed to ion-pair formation via Rydberg states converging on the v+ = 1 vibrational levels of the HF+(X 2 pi 3/2, 1/2) spin-orbit states. These Rydberg states are assigned to the 1 sigma+ part of the nd-complexes (sigma, pi, and delta). Ion-pair formation is observed in this study by the detection of F- ions. Some partially rotationally-resolved structure in a previously published threshold photoelectron spectrum is similarly attributed to ion-pair formation (F- detection) through a combination of the v+ = 17 level of the (A 2 sigma+) 3s sigma Rydberg state and the (X 2 pi 3/2, 1/2, v+ = 1) 7d Rydberg states. On the basis of the present study, an accurate experimental value for the dissociation energy of the ground state of HF has been obtained, D0(HF) = 5.8650(5) eV.     

Positron mobility in polyethylene in the 60–400 K temperature range

We have determined the positron mobility (₊) in polyethylene samples (67.2% crystalline, glass transition temperatureT _g=151 K) in the 64–400 K temperature range by Doppler shift measurements. A method based on the simulataneous observation of two lines from¹³³Ba and¹³⁷Cs radioactive sources together with the positron annihilation line, was employed to measure the Doppler shift of the 511 keV line as a function of the electric field applied to the samples. With this method we were able to measure at the same time the drift velocity of positrons and theS parameter. This parameter is very important in the interpretation of the mobility trend in samples where the positron states change with temperature. The positron mobility was corrected for positronium formation. ₊ at 64 K is 31.7±0.8 cm² V^–1 s^–1 then decreases up to 123 K, increases at 148 K and decreases again up to 170 K (₊=26.9±0.8 cm² V^–s^–). This sharp change in mobility is centred around the glass transition temperature of our samples. Then the mobility remains almost constant up to 230 K. From 250 K to 377 K, ₊ increases and reaches the value of 38.4±1.0 cm² V^–1s^–1. The corrected experimental data were well fitted by a simple model taking into account scattering and a thermally activated process (hopping mechanism).