Swelling of <Emphasis Type="Italic">N</Emphasis>-vinylcaprolactam-dodecyl methacrylate gel in {heptane + toluene} mixtures

A copolymer gel has been synthesized from N-vinylcaprolactam and dodecyl methacrylate in ethanol using the free radical cross-linking polymerization method. Characterizations of the gel were performed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA) techniques. Swelling behavior of the gel was investigated in heptane, toluene, and their binary mixtures with different compositions. Swelling value in toluene is higher than that in heptane and swelling value increases with the increasing initial content of toluene in the binary mixture with heptane. The swelling values are correlated by the first- and second-order differential equations, and the best model correlating the experimental results is a second-order one. Diffusion coefficients have also been calculated for heptane and toluene at each concentration by power-law and first-order equations. While the diffusion mechanism of the gel in heptane is a Fickian one, the gel swelled in toluene exhibits a non-Fickian character. Diffusion mechanisms of the gels in binary mixtures are much more complicated. Because of the higher swelling degree in toluene compared to that in heptane, selectivity of the gel in different {heptane + toluene} mixtures with selectivity close to 1 has also been taken into consideration.     

The effect of intramolecular‐hydrogen bonds in the synthesis of novel imidates from a 13‐membered dioxadithia crown ether diester

The synthesis and structural properties of three novel imidates, 11,13‐bis‐(2‐amino‐ethylimino)‐1,10‐dioxa‐4,7‐dithiacyclotridecane ( 2 ), 11,13‐bis‐(3‐aminopropylimino)‐1,10‐dioxa‐4,7‐dithiacyclotridecane, ( 3 ) and 2,11‐dioxa‐5,8‐dithia‐13,16,19,22‐tetraazabicyclo[10.10.1]tricosa‐1(22),12‐diene, ( 4 ) have been described. These compounds were synthesized by treating 1,10‐dioxa‐4,7‐dithiacyclotridecane‐11,13‐diester ( 1 ) with the appropriate diamine under N₂ and their structures have been characterised by elemental analyses, ¹H‐ and ¹³C‐nmr, ir, and mass spectral studies. Elemental analyses and spectroscopic data support the proposed imidate structures. In addition, total energy and heat of formation (Figure 2) calculated for imidates 2a‐4a and 2b‐4b by the semiempirical AM1 calculations have shown that imidates 2b‐4b having intramolecular hydrogen bonds are more stable (5‐10 kcal/mol) than compounds 2a‐4a .     

Poly(allylamine hydrochloride) Functionalized Multiwalled Carbon Nanotube Modified Carbon Paste Electrode as Acetylcholinesterase Biosensor Transducer

In this work, a sensitive, practical and reliable acetylthiocholine (ATCh) biosensor based on poly(allylamine hydrochloride) functionalized multiwalled carbon nanotube (PAH/MWCNT) was fabricated and used for pesticide detection. As far as we know, this is the first work that constitutes the usage of PAH and MWCNT for ATCh biosensor. The developed system was characterized by using scanning electron microscopy, electrochemical impedance spectroscopy and cyclic voltammetry. The influence of parameters such as enzyme amount and pH were examined and a linearity between 5×10^?5 M?2.0×10^?3 M for ATCh was obtained. The proposed biosensor was applied for a model pesticide, monocrotophos, detection. The analytical curve showed an excellent linearity in the monocrotophos concentration range of 1–25 pg/mL with an incubation time of 5 min. Limit of detection and limit of quantification values were calculated as 0.88 and 2.9 pg/mL, respectively. The system was also applied for detection of monocrotophos in grape, tomatoe, tap and mineralized water samples and promising recovery values were obtained.     

Models for copper proteins. Copper(I) and (II) complexes of a novel binucleating tetraamino-tetrathioether ligand

The novel binucleating ligand, 6,6 prime-methylene-bis(5 prime-amino-3 prime,4 prime-benzo-2 prime-thiapentyl)-1,11-diamino-2,3:9,10-dibenzo-4,8-dithiaundecane (H4L) was prepared and reacted with copper(II) salts in dry MeOH to yield mixtures of copper(I) and copper(II) complexes with Cl- and ClO-4 counter ions. The amine functions on the ligand release protons to form copper(I) complexes: (Cu2L)X2, where X=Cl−, ClO4-. The complexes were oxidized to (Cu2L)X4 with H2O2 in DMF; Cu(NO3)2 gave a different complex, [Cu2(H4L)(NO3)2](NO3)2, as regards proton releasing ability, coordination and oxidation number. Evidence for the structures of this new tetraamino-tetrathioether ligand and its copper complexes is provided by 1H-, 13C-n.m.r., mass, u.v.–vis., i.r. spectra, elemental analyses, molar conductivities and magnetic moments. This revised version was published online in June 2006 with corrections to the Cover Date.     

Synthesis and Structural Studies of 6-（2,5-Dimethyl-1H-pyrrol-1-yl）pyridin-2-amine

6-(2,5-Dimethyl-1H-pyrrol-1-yl)pyridin-2-amine (1) was synthesized and characte-rized by elemental analyses,1H-NMR and 13C-NMR,FTIR,Uv-Vis,mass spectral studies and single-crystal X-ray diffraction.All data obtained from spectral studies support the structural properties of 1.Intermolecular N-H…N hydrogen bonds produce an R22(8) ring.An extensive three-dimensional network formed by C-H…π and N-H…π-facial hydrogen bonds is responsible for the crystal stabilization.The combination of C-H…π interactions produces R33(12),R43(19) and R44(20) rings.     

A near IR di-styryl BODIPY-based ratiometric fluorescent chemosensor for Hg(II)

A novel BODIPY-based near-IR emitting probe as a selective and sensitive fluorophore for Hg(II) is synthesized. This versatile BODIPY fluorophore is functionalized for long wavelength emission at the 3 and 5 positions via a condensation reaction in which two dithiodioxomonoaza-based crown-containing phenyl units are conjugated to the BODIPY core as a chelating unit. This designed fluorophore, employing an ICT sensor can be used effectively to detect Hg(II) cations by way of a hypsochromic shift (∼90 nm) in both the absorption and emission spectra.     

Investigation of DNA cleavage activities of new oxime-type ligand complexes and molecular modeling of complex-DNA interactions

Nucleolytic activities of some new oxime-type ligand complexes were investigated by neutral agarose gel electrophoresis. Analysis of the cleavage products in agarose gel indicated that all complexes used converted supercoiled pUC18 plasmid DNA to its nicked or linear form. It was found that nucleolytic activities of the complexes depend on the complex concentration, reaction time and the presence of a cooxidant (magnesium monoperoxyphthalate, MMPP) in the reaction mixture. However, the complexes cleaved pUC18 plasmid DNA at all investigated pH values. Nucleolytic activities of complexes were investigated for different complex concentrations (0.1–100 μmol L⁻¹), pH values (6.0–10.0) and reaction times (0–60 min). Molecular modeling studies performed by the Hyperchem Software together with DNA-binding studies showed that planar sites of the complexes intercalated into double stranded DNA. It can be concluded that all oxime-type ligand complexes used can be evaluated as nuclease mimics.     

Di- and tetranuclear copper(II) complexes of a novel binucleating tetrathioether-tetrathiol ligand

A novel bi-tetradentate polythioether ligand, 6,6-methylene-bis(5- mercapto-3-thiahexyl)-4,8-dithiaundecane-1, 11-dithiol (H4L) was synthesized, and its di- and tetranuclear copper(II) complexes were prepared, and characterized by elemental analyses, magnetic moments, 1H-n.m.r., i.r., and Uv/vis spectra. The i.r. data show that the ligand acts in a tetradentate manner and coordinates via one S atom of the thioether and thiol groups. The geometry of the metal chelates is discussed with the help of magnetic and spectroscopic measurements. The elemental analyses, stoichiometry, and spectroscopic data of the complexes indicate that the copper(II) ions are coordinated to the bi-dianion of the ligand. The function of the thiol ligand is to release protons to form copper(II) complexes, (Cu2L).     

Polymeric copper(II) and nickel(II) complexes of a tetraoxime containing a binucleating macrocycle ligand

Polymeric copper(II) and nickel(II) complexes of a binucleating tetraoxime macrocycle, 6,6-methylene-bis[1,12-di(hydroximino)- 2,3;9,10-dibenzo-1,11-diaza-4,8-dithiacyclotridecane] (H4L), have been prepared and characterised by elemental analysis, magnetic moments, i.r., uv/vis., and e.p.r. spectral studies. I.r. spectra show that the ligand acts in a tetradentate manner and coordinates via N, S and O donor atoms. The geometry of the resulting metal chelates is discussed with the help of magnetic and spectroscopic measurements. The elemental analyses, stoichiometry and the spectroscopic data of the complexes indicate that the copper(II) and nickel(II) ions are coordinated by the coordination environment of the ligand. The spectral data suggest a distorted tetragonal geometry for polymeric copper(II), and nickel(II) ions in the complexes. The stoichiometry of the metal-to- H4L ratio of complexes (2) and (3), prepared from CuCl2 and NiCl2 respectively, was 3:1, suggesting the formation of polymeric species.