Adsorption, capillary bridge formation, and cavitation in SBA-15 corrugated mesopores: a Derjaguin-Broekhoff-de Boer analysis

A Derjaguin-Broekhoff-de Boer analysis of adsorption and desorption in SBA-15 mesoporous silica is presented, using realistic geometrical models that account for the pore corrugation in these materials. The model parameters are derived from independent electron tomography and small-angle scattering characterization. A geometrical characteristic of the pore that is found to be important for adsorption is the corrugation length, l(C), which describes the longitudinal size of the geometrical defects along a given pore. Capillary bridges are possible only for large values of l(C). The results are explained in terms of two spinodal and two equilibrium pressures, characterizing the wide and the narrow sections of the pores. Simplified analytical expressions are obtained, which provide necessary conditions for bridge formation and for cavitation in terms of the radii of the narrow and wide sections of the pores, as well as of l(C). Quite generally, the results show that the deviation of the pore shape from that of ideal cylinders is key to understanding adsorption and desorption in corrugated mesopores, notably in SBA-15.     

Direct loading of polymer matrices in plastic microchips for rapid DNA analysis: A comparative study

We report the design and performance validation of microfluidic separation technologies for human identification using a disposable plastic device suitable for integration into an automated rapid DNA analysis system. A fabrication process for a 15-cm long hot-embossed plastic microfluidic devices with a smooth semielliptical cross section out of cyclic olefin copolymer is presented. We propose a mixed polymer solution of 95% w/v hydroxyethylcellulose and 5% w/v polyvinylpyrrolidone for a final polymer concentration of 2.5 or 3.0% to be used as coating and sieving matrix for DNA separation. This formulation allows preparing the microchip without pretreatment in a single-loading step and provides high-resolution separation (≈1.2 bp for fragments <200 bp), which is superior to existing commercial matrices under the same conditions. The hot-embossed device performance is characterized and compared to injection-molded devices made out of cyclic olefin copolymer based on their respective injector geometry, channel shape, and surface charges. Each device design is assessed by fluorescence videomicroscopy to evaluate the formation of injection plugs, then by comparing electropherograms for the separation of a DNA size standard relevant to human identification.     

Random Skew Plane Partitions with a Piecewise Periodic Back Wall

Random skew plane partitions of large size distributed according to an appropriately scaled Schur process develop limit shapes. In the present work, we consider the limit of large random skew plane partitions where the inner boundary approaches a piecewise linear curve with non-lattice slopes, describing the limit shape and the local fluctuations in various regions. This analysis is fairly similar to that in Okounkov and Reshetikhin (Commun Math Phys 269:571–609, 2007), but we do find some new behavior. For instance, the boundary of the limit shape is now a single smooth (not algebraic) curve, whereas the boundary in Okounkov and Reshetikhin (Commun Math Phys 269:571–609, 2007) is singular. We also observe the bead process introduced in Boutillier (Ann Probab 37(1):107–142, 2009) appearing in the asymptotics at the top of the limit shape.     

时间分辨全反射红外光谱对醋酸诱导丝蛋白构象转变的研究

采用时间分辨全反射红外光谱为主要分析手段, 对醋酸在丝蛋白膜中的扩散过程及其对丝蛋白构象转变机理进行了研究. 结果表明, 醋酸能够诱导丝蛋白构象转变为β-折叠. 醋酸的扩散速率和β-折叠构象的生成速率较为相似, 表明醋酸分子渗透到丝蛋白聚集体中是破坏丝蛋白原有氢键并诱导肽链重排, 进而实现构象转变的一个先决条件. 同时, 通过比较真空干燥处理前后丝蛋白膜的实验结果, 证实了丝蛋白中的水含量是影响醋酸的扩散速度以及丝蛋白多肽链重排速度的一个重要因素.     

Wireless Coupling of Conducting Polymer Actuators with Light Emission

Combining the actuation of conducting polymers with additional functionalities is an interesting fundamental scientific challenge and increases their application potential. Herein we demonstrate the possibility of direct integration of a miniaturized light emitting diode (LED) in a polypyrrole (PPy) matrix in order to achieve simultaneous wireless actuation and light emission. A light emitting diode is used as a part of an electroactive surface on which electrochemical polymerization allows direct incorporation of the electronic device into the polymer. The resulting free-standing polymer/LED hybrid can be addressed by bipolar electrochemistry to trigger simultaneously oxidation and reduction reactions at its opposite extremities, leading to a controlled deformation and an electron flow through the integrated LED. Such a dual response in the form of actuation and light emission opens up interesting perspectives in the field of microrobotics.     

Total synthesis of some new 4-demethoxyanthracyclinones

Optically active 4-demethoxyanthracyclinoiies (39a-g) bearing a variety of substituents at the 9position have been synthesised by an analogous route to that previously employed by us for (+)-4-demethoxydaunomycinone (5). These novel anthracyclinones have been prepared in sufficient quantity for subsequent glycosidation and biological evaluation.     

Influence of roughness on attachment line boundary layer transition in hypersonic flow

 Attachment line boundary layer transition on swept cylinders is studied in a low enthalpy hypersonic wind tunnel at M _∞=7.14. Sweep angles of 60° and 70° are used and transition is detected by means of heat flux measurements. The influence on attachment line transition of single 2D-roughness elements, in the form of tripwires or slots, as well as 3D obstacles is determined and the results are analyzed with respect to Poll’s criterion. Received: 16 January 1996 / Accepted: 12 July 1996     

Total cross sections,elastic scattering observables and direct reconstruction of scattering matrix in np Interactions between 0.8 and 1.1 GeV at SATURNE II

Neutron-proton total cross section differences with the beam and target polarizations orientated either transversally or longitudinally with respect to the beam direction, as well as 11 spin dependent elastic scattering observables measured at SATURNE II as a function of energy and angle are presented. A major part of results was measured using the quasimonoenergetic polarized neutron beam and/or the polarized proton target. A small part of data was obtained using a polarized deuteron beam considered as a beam of quasifree neutrons and protons. The present paper represents a review of measured observables. Several sets of present data are compared with results obtained in other laboratories below 0.8 GeV. Imaginary parts of spin dependent forward amplitudes for np scattering and for the isospin stateI=0 were determined. First direct reconstruction of the np scattering matrix at 0.84 GeV is shown.We acknowledge support for this work from J. Arvieux, R. Beurtey, P. Borgeaud, P. A. Chamouard, A. Fleury, E. Heer, J. M. Laget, L. Musílek, L. Price, N. A. Russakovich, J. Saudinos, and J. Tolar. Discussions with J. Franz, J. M. Lagniel, C. Lechanoine-Leluc, G. Milleret, I. Strakovsky, and Y. Terrien have solved several problems. The exploitation of the polarized target owes a lot to G. Guillier, Ph. Marlet and J. Mommejat. We thank T. Lambert, E. Perrin, J. Poupard and J. P. Richeux for their efficient help in preparation of the experiment and the SATURNE II crew for unusual accelerator operations. Finally, we express our gratitude to Françoise Haroutel, who efficiently helped overcome all administrative requirements concerning a large international colaboration. This work was partly supported by the Swiss National Science Foundation and by the US Department of Energy Contract No. W-31-109-ENG-38.