Cationic copolymerization of tetrahydrofuran with propylene oxide. IV. Use of antimony pentachloride as catalyst

Propylene oxide and tetrahydrofuran were polymerized cationically by an in situ catalytic system composed of antimony pentachloride and 1,2-propanediol. The rates of polymerization were measured by vapor-phase chromatography in the temperature range from ?20°C to +20°C. The Arrhenius parameters pertaining to the reaction of each of the comonomers were evaluated and compared with data published earlier for other catalytic systems. The present catalyst system was incapable of initiating a homo-polymerization of tetrahydrofuran in the absence of propylene oxide, while the latter was readily homopolymerized. In a copolymerization system, the rates of consumption of both monomers were first-order in respect to the catalyst, but the reaction ceased when all of the propylene oxide had been consumed. The relative reactivity of the two monomers as characterized by the copolymerization parameters r₁ (PO) = 1.15 and r₂ (THF) = 0.70 suggests that in the copolymerization system, tetrahydrofuran is capable of a reaction with its own active center. This is discussed in terms of a possible mechanism involving the effects of penultimate units and extensive chain transfer. The latter is well evident from the molecular weights of resulting copolyethers, which do not exceed one thousand.     

Predictive models to describe VLE in ternary mixtures water + ethanol + congener for wine distillation

The modeling of liquid–vapor equilibrium in ternary mixtures that include substances found in alcoholic distillation processes of wine and musts is analyzed. In particular, vapor–liquid equilibrium in ternary mixtures containing water + ethanol + cogener has been modeled using parameters obtained from binary mixture data only. The congeners are substances that although present in very low concentrations, of the order of part per million, 10⁻⁶ to 10⁻⁴ mg/L, are important enological parameters [1] and [2]. In this work two predictive models, the PSRK equation of state and the UNIFAC liquid phase model and two semipredictive activity coefficient models: NRTL and UNIQUAC have been used. The results given by these different models have been compared with literature data and conclusions about the accuracy of the models studied are drawn, recommending the best models for correlating and predicting the phase equilibrium in this type of mixtures.     

Rapid estmation of technetium in99Mo−99mTc generators

A nomogram is presented to estimate the radiooctivity of^99mTc in⁹⁹Mo−^99mTc generators, based on equations of radioactive equilibrium. Since the parent element decays through two isomeric states of the daughter, the ratio of the total mass of technetium per millicurie of^99mTc is a function of the time elapsed between two consecutive elutions. Values of the amount of^99mTc expressed as a mole fraction or in moles or grams of total technetium per millicurie of^99mTc^m are also presented.     

Glycan–protein cross-linking mass spectrometry reveals sialic acid-mediated protein networks on cell surfaces

A cross-linking method is developed to elucidate glycan-mediated interactions between membrane proteins through sialic acids. The method provides information on previously unknown extensive glycomic interactions on cell membranes. The vast majority of membrane proteins are glycosylated with complicated glycan structures attached to the polypeptide backbone. Glycan–protein interactions are fundamental elements in many cellular events. Although significant advances have been made to identify protein–protein interactions in living cells, only modest advances have been made on glycan–protein interactions. Mechanistic elucidation of glycan–protein interactions has thus far remained elusive. Therefore, we developed a cross-linking mass spectrometry (XL-MS) workflow to directly identify glycan–protein interactions on the cell membrane using liquid chromatography-mass spectrometry (LC-MS). This method involved incorporating azido groups on cell surface glycans through biosynthetic pathways, followed by treatment of cell cultures with a synthesized reagent, N-hydroxysuccinimide (NHS)–cyclooctyne, which allowed the cross-linking of the sialic acid azides on glycans with primary amines on polypeptide backbones. The coupled peptide–glycan–peptide pairs after cross-linking were identified using the latest techniques in glycoproteomic and glycomic analyses and bioinformatics software. With this approach, information on the site of glycosylation, the glycoform, the source protein, and the target protein of the cross-linked pair were obtained. Glycoprotein–protein interactions involving unique glycoforms on the PNT2 cell surface were identified using the optimized and validated method. We built the GPX network of the PNT2 cell line and further investigated the biological roles of different glycan structures within protein complexes. Furthermore, we were able to build glycoprotein–protein complex models for previously unexplored interactions. The method will advance our future understanding of the roles of glycans in protein complexes on the cell surface.

The cell surface glycocalyx is highly interactive defined by extensive covalent and non-covalent interactions. A method for cross-linking and characterizing glycan–peptide interactions in situ is developed.     

The complexation of Cr(III) and Cr(VI) with flavones in micellar media and its use for the spectrophotometric determination of chromium

The complexation of chromium by different flavonoid dyes in micellar media has been studied, in particular the reaction between chromium and quercetin. Micellar effects, the reaction pathway proposed and the application of the method to the determination of Cr(VI) and Cr(VI) + Cr(III) mixtures are discussed.     

Reactor power dependency of the neutron flux parameters fork 0-standardization

Using the facilities of the Triga Mark III reactor at the NNRI, Mexico and the HAV-1 multipurpose monitor, the reactor power dependency for thek ₀-standardization essential neutron flux parameters as: epithermal shape factor (), thermal to epithermal ratio (f) and neutron temperature (T _n ) were experimentally obtained. Evaluation of the obtained dependencies shows that it is unnecessary to analyze the possible introduction of correction factors in thek ₀-INAA experimental results. A single experimental procedure to determine throughf is suggested.     

Cu3(mu-S)2]3+ clusters supported by N-donor ligands: progress toward a synthetic model of the catalytic site of nitrous oxide reductase

By treating Cu(I) complexes of neutral, bidentate N-donor ligands with S8, clusters with novel delocalized mixed-valence [Cu3(mu-S)2]3+ cores have been isolated. X-ray crystal structures and UV-vis and resonance Raman spectral features of these clusters reveal similarities to the tetracopper-sulfide "CuZ" site in nitrous oxide reductase. A delocalized S = 1 ground state for the mixed-valent CuIIICu2II cores is supported by the observation of high symmetry in the X-ray structures and 10-line hyperfine features arising from coupling to three equivalent Cu ions in EPR spectra obtained at room temperature (shown) and 10 K. The delocalization we observe contrasts with the localization reported previously for a [Cu3(mu-O)2]3+ analogue (Root, D. E.; Henson, M. J.; Machonkin, T.; Mukherjee, P.; Stack, T. D. P.; Solomon, E. I. J. Am. Chem. Soc. 1998, 120, 4982), which we rationalized through DFT calculations.     

Structure and conformations of N-(fluoroformyl)imidosulfurous dichloride,FC(O)N=SCl2

The IR (gas) and Raman (liquid) spectra of FC(O)NSCl(2) demonstrate the presence of a conformational mixture in both phases. According to a gas electron diffraction study, the main conformer (94(8)%) possesses a syn-syn structure (C(O)F group synperiplanar with respect to the SCl(2) bisector and the C=O bond synperiplanar to the N=S bond). Quantum chemical calculations (HF, B3LYP and MP2 with 6-31G basis set, and MP2/6-311(2df)) predict a syn-anti structure for the second conformer. Analysis of the IR (gas) spectrum results in a contribution of 5(1)% of the minor form, corresponding to a Gibbs free energy difference DeltaG degrees = G degrees (syn-anti) - G degrees (syn-syn) = 1.75(15) kcal/mol. This value is reproduced very well by quantum chemical calculations, which include electron correlation effects (DeltaG degrees = 1.28-1.56 kcal/mol). The HF approximation overestimates this energy difference (DeltaG degrees = 3.24 kcal/mol).     

Molecular distillation

Molecular distillation was studied for the separation of tocopherols from soya sludge, both experimentally and by simulation, under different operating conditions, with good agreement. Evaporator temperatures varied from 100°C to 160°C and feed flow rates ranged from 0.1 to 0.8 kg/h. The process pressure was maintained at 10⁻⁶ bar, the feed temperature at 50°C, the condenser temperature at 60°C, and the stirring at 350 rpm. For each process condition, samples of both streams (distillate and residue) were collected and stored at −18°C before tocopherols analyses. Owing to the differences between molecular weights and vapor pressures of free fatty acids and tocopherols, tocopherols preferentially remained in the residue at evaporator temperatures of 100°C and 120°C, whereas for higher temperatures (140°C and 160°C) and lower feed flow rate, tocopherols tended to migrate to the distillate stream.