A density functional theory study of the chemoselectivity and regioselectivity of the domino cycloaddition reactions of nitroalkenes with substituted alkenes

The chemoselectivity and regioselectivity of the domino intermolecular [4 + 2]/[3 + 2] cycloaddition reactions of nitroalkenes with substituted alkenes, vinyl ethers as electron-rich alkenes and vinyl ketones as electron-poor alkenes, have been studied using density functional theory (DFT) methods with the B3LYP functional and the 6-31G^* basis set. These domino processes comprise two consecutive cycloaddition reactions: the first one is an intermolecular [4 + 2] cycloaddition of the vinyl ether to the nitroalkene to give a nitronate intermediate, which then affords the final nitroso acetal adduct through an intermolecular [3 + 2] cycloaddition reaction with the vinyl ketone. The two consecutive cycloadditions present total chemoselectivity and ortho regioselectivity. While first [4 + 2] cycloaddition reaction takes place along the attack of the electron-rich alkene to nitroalkene, the [3 + 2] one takes place along the attack of the electron-poor alkene to the corresponding nitronate intermediate. This DFT study is in complete agreement with the experimental results. Received: 16 September 1999 / Accepted: 3 February 2000 / Published online: 2 May 2000     

Characterization of dendrimer properties by capillary electrophoresis and their use as pseudostationary phases

The general properties of dendrimers and in particular their electrolytic characteristics that are relevant in electrokinetic separations, are described. In order to confirm theoretical considerations on commercial dendrimer charge and hydrodynamic radius, several capillary zone electrophoresis (CZE) experiments were performed. Electrophoretic mobilities measured at different pH values indicated a sensible increase of dendrimer hydrodynamic radius at pH values lower than 2.5. This was probably due to the Coulombic repulsion of charged amine groups of the inner dendrimer shells. The principal reasons that should address the use of dendrimers as pseudostationary phases in micellar electrokinetic chromatography (MEKC) are discussed. Moreover, a survey of different separations performed utilizing dendrimers in MEKC as well as of several future plausible uses of various classes of dendrimers is presented.     

High-speed gradient parallel liquid chromatography/tandem mass spectrometry with fully automated sample preparation for bioanalysis: 30 seconds per sample from plasma

In this work, a high-throughput and high-performance bioanalytical system is described that is capable of extracting and analyzing 1152 plasma samples within 10 hours. A Zymark track robot system interfaced with a Tecan Genesis liquid handler was used for simultaneous solid-phase extraction of four 96-well plates in a fully automated fashion. The extracted plasma samples were injected onto four parallel monolithic columns for separation via a four-injector autosampler. The use of monolithic columns allowed for fast and well-resolved separations at a considerably higher flow rate without generating significant column backpressure. This resulted in a total chromatographic run cycle time of 2 min on each 4.6 x 100 mm column using gradient elution. The effluent from the four columns was directed to a triple quadrupole mass spectrometer equipped with an indexed four-probe electrospray ionization source (Micromass MUX interface). Hence, sample extraction, separation, and detection were all performed in a four-channel parallel format that resulted in an overall throughput of about 30 s per sample from plasma. The performance of this system was evaluated by extracting and by analyzing twelve 96-well plates (1152) of human plasma samples spiked with oxazepam at different concentrations. The relative standard deviation (RSD) of analyte sensitivity (slope of calibration curve) across the four channels and across the 12 plates was 5.2 and 6.8%, respectively. An average extraction recovery of 77.6% with a RSD of 7.7% and an average matrix effect of 0.95 with a RSD of 5.2% were achieved using these generic extraction and separation conditions. The good separation efficiency provided by this system allowed for rapid method development of an assay quantifying the drug candidate and its close structural analog metabolite. The method was cross-validated with a conventional liquid chromatography/tandem mass spectrometry (LC/MS/MS) assay.     

Trinuclear pyrazine-bridged ruthenium complexes: syntheses, electrochemistry, NIR-Vis spectra, and their interpretation in terms of a 5-orbital-3-parameter model

A study of absorption spectra in the near-infrared (NIR) and visible (vis) regions of trinuclear Ru complexes containing pyrazine (pyz) as bridging ligand, trans-[(Ru(NH(3))(5)pyz)(2)Ru(NH(3))(4)](m+)(m = 6-9), is reported. The spectra were recorded on aqueous solutions containing the described species formed in situ by stoichiometric additions of a standard solution of Ce(SO(4))(2). They were interpreted in terms of a simple 5-orbital-3-parameter model which includes the effects of d-pi interaction and electronic correlation. The model is shown to account for the observed NIR-vis spectra of the complex ions. The 6+ parent species was synthesized by an improved literature method and fully characterized. The novel 8+ complex was also prepared and characterized. The 9+ ion was established to be slowly reduced by water, with dioxygen formation. Electrochemical (CV and DPV) studies were performed on the trinuclear 6+ complex, as well as on its constituent fragments [Ru(NH(3))(5)(pyz)](2+) and trans-[Ru(NH(3))(4)(pyz)(2)](2+).     

From clusters to ionic complexes: structurally characterized thallium titanium double alkoxides

A series of sterically varied titanium alkoxides [[Ti(OR)(4)](n)(), n = 4, OR = OCH(2)CH(3) (OEt); n = 1, OCH(CH(3))(2) (OPr(i)); n = 2, OCH(2)C(CH(3))(3) (ONep); n = 1, OC(6)H(3)(CH(3))(2)-2,6 (DMP)] were reacted with a series of thallium alkoxides [[Tl(OR)](x) (x = 4, OR = OEt, ONep; n = infinity, DMP)]. The resultant products of the [Tl(mu(3)-OEt)](4)-modified [Ti(OR)(4)](n)() (OR = OEt, OPr(i), ONep) were found by X-ray analysis to be Tl(4)Ti(2)(mu-O)(mu(3)-OEt)(8)(OEt)(2) (1), Tl(4)Ti(2)(mu-O)(mu(3)-OPr(i))(5)(mu(3)-OEt)(3)(OEt)(2) (2), and TlTi(2)(mu(3)-OEt)(2)(mu-OEt)(mu-ONep)(2)(ONep)(4) (3), respectively. The reaction of [Tl(mu(3)-OEt)](4), 12HOEt, and 4[Ti(mu-ONep)ONep)(3)](2) to generate 3 in a higher yield resulted in the isolation of TlTi(2)(mu(3)-OEt)(mu(3)-ONep)(mu-OEt)(mu-ONep)(2)(ONep)(4) (4). Compounds 1 and 2 possess an octahedral (Oh) arrangement of two Ti and four Tl metal atoms around a mu-O central oxide atom (the Tl-O distance is too long to be considered a bond). For both compounds, each Ti atom adopts a distorted Oh geometry with one terminal OEt ligand. The Tl atoms are formally 4-coordinated, adopting a distorted pyramidal geometry using four mu(3)-OR (OR = OEt or OPr(i)) ligands to complete their coordination sphere. The Tl atoms reside approximately 1.4 A below the basal plane of oxygens. In contrast to these structures, both 3 and 4 utilize ONep ligands and display reduced oligomerization yielding trinuclear complexes without oxo formation. The two Ti cations are Oh, and the single Tl cation is in a formal distorted pyramidal (PYD) arrangement. If the lone pair of the Tl cations are considered in the geometry, each Tl adopts a square base pyramidal geometry. Two terminal ONep ligands are bound to each Ti with the remainder of the molecule consisting of mu(3)- and mu-ONep ligands. The reaction of [Tl(mu(3)-ONep)](4) with two equivalents of [Ti(mu-ONep)(ONep)(3)](2) also led to the isolation of the homoleptic trinuclear complex TlTi(2)(mu(3)-ONep)(2)(mu-ONep)(3)(ONep)(4) (5) which is analogous in structure to the mixed ligand species of 3 and 4. Each Ti is Oh coordinated with six ONep ligands, and the single Tl is PYD bound by ONep ligands. A further increase in the steric bulk of the pendant ligands, using [Tl(mu-DMP)](infinity) and [Ti(mu-ONep)(ONep)(3)](2), resulted in a further decrease in the nuclearity yielding the dinuclear species TlTi(mu-DMP)(mu-ONep)(DMP)(ONep)(2) (6). For 6, the two metals are bound by a mu-ONep and a mu-DMP ligand. The Tl metal center was solved in a bent geometry while the Ti adopted a distorted trigonal bipyramidal (TBP) geometry using three ONep and two DMP ligands to fill its coordination sphere. Further increasing the steric bulk of the ancillary ligands using Ti(DMP)(4) and [Tl(mu-DMP)](infinity) led to the formation of [Tl(+)][(-)(eta(2-3)-DMP)Ti(DMP)(4)] (7). The Ti metal center is in a TBP geometry, and the "naked" Tl cation resides unencumbered by solvent molecules but was found to have a strong pi-interaction with four DMP ligands of neighboring Ti(DMP)(5)(-) anions. For this novel set of compounds, (205)Tl NMR spectroscopy was used to investigate the solution behavior of these compounds. Multiple (205)Tl resonances were observed for the solution spectra of the crystalline material of 1-6, and a broad singlet was observed for 7. The large number of minor resonances noted for these compounds was attributed to sensitivity of the Tl cation based on small variations due to ligand rearrangement. However, the major resonance noted in the (205)Tl NMR solution spectra of 1-7 are in agreement with their respective solid-state structures.     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

Controlled Positioning of Nanoparticles on Graphene by Noninvasive AFM Lithography

Atomic force microscopy is shown to be an excellent lithographic technique to directly deposit nanoparticles on graphene by capillary transport without any previous functionalization of neither the nanoparticles nor the graphene surface while preserving its integrity and conductivity properties. Moreover this technique allows for (sub)micrometric control on the positioning thanks to a new three-step protocol that has been designed with this aim. With this methodology the exact target coordinates are registered by scanning the tip over the predetermined area previous to its coating with the ink and deposition. As a proof-of-concept, this strategy has successfully allowed the controlled deposition of few nanoparticles on 1 μm(2) preselected sites of a graphene surface with high accuracy.     

A systematic study of two complementary protocols allowing the general,mild and efficient deprotection of N-pivaloylindoles

Two mild and general protocols for the high-yielding deprotection of indoles and related fused heterocyclic systems are described, involving either hydride transfer from LDA or hydrolysis by the DBU–water system. Both methods were shown to tolerate a wide variety of substituents and functional groups, but the hydrolytic one proved to be particularly general, being compatible with 2-alkyl substituents, aldehydes, ketones, carboxylic acids, halogens, ethers, amides and esters. Yields were normally excellent in both cases, but were usually slightly higher for the reductive method. Taken together, these two protocols provide a general solution to the problem of pivaloyindole deprotection.     

Synthesis and Characterization of a [Mn12O12(O2CR)16(H2O)4] Complex Bearing Paramagnetic Carboxylate Ligands. Use of a Modified Acid Replacement Synthetic Approach

Summary.  A new modified approach for the synthesis of Mn₁₂ clusters, based on the use of complex [Mn₁₂O₁₂(O₂C ^t Bu)₁₆(H₂O)₄] (2) as starting material to promote the acidic ligand replacement, is presented here. This new synthetic approach allowed us to obtain complex [Mn₁₂O₁₂(O₂CC₆H₄N(O^•) ^t Bu)₁₆(H₂O)₄] (3), whose preparation remained elusive by direct replacement of the acetate groups of Mn₁₂Ac (1). Complex 3 bearing open-shell radical units, was prepared to increase the total spin number of its ground state, and consequently, to increase T _B , with the expectation that the radical ligands may couple ferromagnetically with the Mn₁₂ core. Unfortunately, magnetic measurements of complex 3 revealed that the sixteen radical carboxylate ligands interact antiferromagnetically with the Mn₁₂ core to yield a S = 2 magnetic ground state. Corresponding author. E-mail: vecianaj@icmab.es Received March 27, 2002; accepted May 2, 2002     

Effects of tin(IV) chloride and of organotin compounds on aquatic micro-organisms

The growth response of the alga Chlorella kessleri and the euglenoid Euglena gracilis has been studied as a model system to determine the effects of a tin salt (SnCl₄·5H₂O) and of some organotin (OT) derivatives, namely tetrabutyltin (TeBT), tributyltin (TBT) and tributyltin oxide (TBTO). Abiotic degradation was studied as well. Cells were exposed to a toxicity series (0–50 μg/mL⁻¹) for the four chemicals in seven-day bioassays. Both microorganisms are tolerant of the inorganic salt, but growth inhibition was significant for all OT compounds, and especially large for TBT and TBTO. Although C. kessleri and E. gracilis are known to be tolerant towards metals and organic chemicals, the present results show that both are sensitive to organotin compounds: the inhibition of the growth was greater for C. kessleri. © 1998 John Wiley & Sons, Ltd.