Screening of Dowex® anion-exchange resins for invertase immobilization

Commercial yeast invertase (Bioinvert^®) was immobilized by adsorption on anion-exchange resins, collectively named Dowex^® (1×8:50–400, 1×4:50–400, and 1×2:100–400). Optimal binding was obtained at pH 5.5 and 32°C. Among different polystyrene beads, the complex Dowex-1×4–200/invertase showed a yield coupling and an immobilization coefficient equal to 100%. The thermodynamic and kinetic parameters for sucrose hydrolysis for both soluble and insoluble enzyme were evaluated. The complex Dowex/invertase was stable without any desorption of enzyme from the support during the reaction, and it had thermodynamic parameters equal to the soluble form. The stability against pH presented by the soluble invertase was between 4.0 and 5.0, whereas for insoluble enzyme it was between 5.0 and 6.0. In both cases, the optimal pH values were found in the range of the stability interval. The K _m and V _max for the immobilized invertase were 38.2 mM and 0.0489 U/mL, and for the soluble enzyme were 40.3 mM and 0.0320 U/mL.     

Near infrared spectroscopy in the study of polymorphic transformations

The potential of near infrared (NIR) spectroscopy for the characterization of polymorphs in the active principle of a commercial formulation prior to and after the manufacturing process was assessed. Polymorphism in active principles is extremely significant to the pharmaceutical industry. Polymorphic changes during the production of commercial pharmaceutical formulations can alter some properties of the resulting end-products. Multivariate curve resolution-alternating least squares (MCR-ALS) methodology was used to obtain the “pure” NIR spectrum for the active principle without the need to pretreat samples. This methodology exposed the polymorphic transformation of Dexketoprofen Trometamol (DKP) in both laboratory and production samples obtained by wet granulation. No polymorphic transformation, however, was observed in samples obtained by direct compaction. These results were confirmed using by X-ray powder diffractometry (XRD) and differential scanning calorimetry (DSC) measurements. Pure crystalline polymorphs of DKP were available in the laboratory but amorphous form was not, nevertheless the developed methodology allows the identification of amorphous and crystal forms in spite of the lack of pure DKP.     

Microwave-induced multiple functionalization of carbon nanotubes

We describe a new synthetic strategy to produce multifunctionalized carbon nanotubes using a combination of two different addition reactions, the 1,3-dipolar cycloaddition of azomethine ylides and the addition of diazonium salts, both via a simple and fast microwave-induced method. The presence of multifunctionality on the SWNTs has been confirmed using the most useful techniques for the characterization of carbon nanotubes. The doubly functionalized SWNTs can be considered potentially useful for many interesting applications.     

Analysis of polybrominated diphenyl ethers in sewage sludge by matrix solid‐phase dispersion and isotope dilution GC–MS

A method for the determination of 14 polybrominated diphenyl ethers (PBDEs) in sludge from wastewater treatment plants is presented. PBDEs were extracted by matrix solid‐phase dispersion assisted by sonication and determined by isotope dilution gas chromatography with electron impact mass spectrometric detection in the selected ion monitoring mode, using labelled ¹³C‐PBDEs as internal standards. The limits of detection and quantification for the tri‐ to hepta‐BDEs were in the range of 0.05 to 0.5 ng/g dry weight and 0.15 to 1.8 ng/g dry weight, respectively, and 1.6 ng/g dry weight and 5.6 ng/g dry weight for deca‐BDE‐209. The proposed analytical method was applied to determine PBDE levels in sewage sludge samples collected from 19 water treatment plants located in the province of Madrid (Spain). In all of the examined samples, BDE‐100 and BDE‐154 were the main compounds found with a mean concentration of 3.9 and 2.0 ng/g, respectively. PBDEs were detected in all of the samples, and their total concentrations not considering BDE‐209 were between 3.9 and 23.0 ng/g dry weight. The dominant PBDE congener in sewage sludge was BDE‐209, which constituted 38.7 to 97.3% of the total, and showed concentration levels ranging from 8.1 to 717.2 ng/g dry weight.     

Trace analysis of benzophenone-derived compounds in surface waters and sediments using solid-phase extraction and microwave-assisted extraction followed by gas chromatography–mass spectrometry

This study describes a procedure for determining eight benzophenone-derived compounds in surface waters and sediments. These include the pharmaceutical ketoprofen, its phototransformation products 3-ethylbenzophenone and 3-acetylbenzophenone, and five benzophenone-type ultraviolet (UV) filters. The proposed analytical method involves the pre-concentration of water samples by solid-phase extraction (SPE) and microwave-assisted extraction (MAE) of sediment samples followed by derivatization and analysis by gas chromatography–mass spectrometry. Different parameters were investigated to achieve optimal method performance. Recoveries of 91 to 96 % from water samples were obtained using HLB Oasis SPE cartridges, whereas MAE of sediments (30 min at 150 °C) gave recoveries of 80 to 99 %. Limits of detection were between 0.1 and 1.9 ng L^?1 for water samples and from 0.1 to 1.4 ng g^?1 for sediment samples. The developed method was applied to environmental samples and revealed the presence of UV filters in the majority of the surface waters with up to 690 ng L^?1 of 2-hydroxy-4-methoxybenzophenone. By contrast, ketoprofen (≤2,900 ng L^?1) and its degradation products (≤320 ng L^?1) were found in only two rivers, both receiving wastewater treatment plant effluents. Sediment analysis revealed benzophenone to be present in concentrations up to 650 ng g^?1, whereas concentrations of other compounds were considerably lower (≤32 ng L^?1). For the first time, quantifiable amounts of two ketoprofen transformation products in the aqueous environment are reported.     

Aqueous Stable Gold Nanostar/ZIF‐8 Nanocomposites for Light‐Triggered Release of Active Cargo Inside Living Cells

A plasmonic core–shell gold nanostar/zeolitic‐imidazolate‐framework‐8 (ZIF‐8) nanocomposite was developed for the thermoplasmonic‐driven release of encapsulated active molecules inside living cells. The nanocomposites were loaded, as a proof of concept, with bisbenzimide molecules as functional cargo and wrapped with an amphiphilic polymer that prevents ZIF‐8 degradation and bisbenzimide leaking in aqueous media or inside living cells. The demonstrated molecule‐release mechanism relies on the use of near‐IR light coupled to the plasmonic absorption of the core gold nanostars, which creates local temperature gradients and thus, bisbenzimide thermodiffusion. Confocal microscopy and surface‐enhanced Raman spectroscopy (SERS) were used to demonstrate bisbenzimide loading/leaking and near‐IR‐triggered cargo release inside cells, thereby leading to DNA staining.     

Determination of tetrabromobisphenol-A,tetrachlorobisphenol-A and bisphenol-A in soil by ultrasonic assisted extraction and gas chromatography–mass spectrometry

In this work, an isotope dilution method for the determination, in agricultural and industrial soil samples, of tetrabromobisphenol-A, tetrachlorobisphenol-A and bisphenol-A by gas chromatography–mass spectrometry was developed. The compounds were extracted from soil by sonication assisted extraction in small columns (SAESC) with a low volume of ethyl acetate as extraction solvent. For dirty soil samples, such as industrial soils, a simultaneous clean-up on an acidified Florisil–anhydrous sodium sulfate mixture was carried out to remove interferences. After extraction, solvent was evaporated and analytes were derivatized with N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) and determined by isotope dilution gas chromatography with electron impact mass spectrometric detection in the selected ion monitoring mode (GC–MS–SIM), using ¹³C₁₂ labeled compounds as internal standards. Recoveries from spiked samples were between 88% and 108% and the estimated limits of detection (S/N = 3) varied from 30 pg g⁻¹ to 90 pg g⁻¹. The response obtained with this method was linear over the range assayed, 5–300 ng ml⁻¹, with correlation coefficients equal or higher than 0.999. The validated method was used to investigate the levels of these phenolic compounds in soil samples collected from different locations in Spain. Bisphenol-A was detected in all samples at concentrations from 0.7 ng g⁻¹ to 4.6 ng g⁻¹ in agricultural soils and from 1.1 ng g⁻¹ to 44.5 ng g⁻¹ in industrial soils. Tetrabromobisphenol-A was found in various soil samples at levels in the range of 3.4–32.2 ng g⁻¹ in industrial soils and at 0.3 ng g⁻¹ in one agricultural soil, whereas tetrachlorobisphenol-A was not detected.     

Time-dependent density-functional studies of the D2 coulomb explosion

Real-time first principle simulations are presented of the D(2) Coulomb explosion dynamics detonated by exposure to very intense few-cycle laser pulse. Three approximate functionals within the time-dependent density functional theory (TDDFT) functionals are examined for describing the electron dynamics, including time-dependent Hartree-Fock theory. Nuclei are treated classically with quantum corrections. The calculated results are sensitive to the underlying electronic structure theory, showing too narrow kinetic energy distribution peaked at too high kinetic energy when compared with recent experimental results (Phys. Rev. Lett. 2003, 91, 093002). Experiment also shows a low energy peak which is not seen in the present calculation. We conclude that while Ehrenfest-adiabatic-TDDFT can qualitatively account for the dynamics, it requires further development, probably beyond the adiabatic approximation, to be quantitative.     

Reusable sensor based on functionalized carbon dots for the detection of silver nanoparticles in cosmetics via inner filter effect

We report a low cost selective analytical method based on inner filter effect (IFE) for citrate-silver nanoparticle (cit-AgNP) detection, in which fluorescent amine-derivatized carbon dots (a-CDs) act as the donor and aggregated cit-AgNPs as the energy receptor. Carbon dots (CDs) were chemically modified with ethylenediamine (EDA) moieties via amidic linkage displaying an emission band at 440 nm. The presence of cit-AgNPs produces a remarkably quenching of a-CD fluorescence via IFE, since the free amine groups at CD surface induce the aggregation of cit-AgNPs accompany by a red-shifting of their characteristic plasmon absorption wavelength, which resulted in “turn-on” of the IFE-decreased in CD fluorescence. The proposed method, which involves the use of chelating agents for removal of metal ions interferences, exhibits a good linear correlation for detection of cit-AgNPs from 1.23 × 10⁻⁵ to 6.19 × 10⁻⁵ mol L⁻¹, with limits of detection (LOD) and quantification (LOQ) of 5.17 × 10⁻⁶ and 1.72 × 10⁻⁵ mol L^−1, respectively. This method demonstrates to be efficient and selective for the determination of cit-AgNPs in complex matrices such as cosmetic creams and reveals many advantages such as low cost, reusability, high sensitivity and non time-consuming compared with other traditional methods.