Chiral capillary electrophoretic determination of the enantiomeric purity of tetrahydronaphthalenic derivatives, melatoninergic ligands, using highly sulfated beta-cyclodextrins

Using cyclodextrin capillary zone electrophoresis (CD-CZE), baseline separation of synthetic tetrahydronaphthalenic derivatives, potential melatoninergic compounds, was achieved. A method for the enantioresolution of these tetralins and determination of their enantiomeric purity was developed using anionic CDs (highly sulfated-CD or highly S-CD) as chiral selectors and capillaries dynamically coated with polyethylene oxide (PEO). Operational parameters such as the nature and concentration of the chiral selectors, buffer pH, organic modifiers, temperature and applied voltage were investigated. The use of charged CDs provides a driving force for our neutral compounds in the running buffer and enantiomeric resolution by inclusion of compounds in the CD cavity. The highly S-beta-CD was found to be the most effective complexing agent, allowing good enantiomeric resolution. The complete resolution of three tetralin compounds was obtained using 25 mM phosphate buffer at pH 2.5 containing 2.5% w/v of highly S-beta-CD at 25 degrees C with an applied field of 0.25 kV/cm. The apparent association constants of the inclusion complexes were calculated. This optimized method was validated in terms of linearity, sensitivity, accuracy and recovery. The enantiomeric purity for the three molecules was determined and the detection limit of enantiomer impurities is about 0.3-0.6%.     

Chiral separation of N-imidazole derivatives, aromatase inhibitors, by cyclodextrin-capillary zone electrophoresis. Mechanism of enantioselective recognition

Baseline separation of ten new, substituted [1-(imidazo-1-yl)-1-phenylmethyl)] benzothiazolinone and benzoxazolinone derivatives with one chiral center was achieved using cyclodextrin-capillary zone electrophoresis (CD-CZE). A method for the enantiomeric resolution of these compounds was developed using neutral CDs (native alpha-, beta-, gamma-CDs or alpha-, beta-, gamma-hydroxypropyl (HP)-CDs) as chiral selectors. Operational parameters including the nature and concentration of the chiral selectors, pH, ionic strength, organic modifiers, temperature, and applied voltage were investigated. The use of neutral CDs provides enantiomeric resolution by inclusion of compounds in the CD cavity. The HP-alpha-CD and HP-beta-CD were found to be the most effective complexing agents and allowed efficient enantiomeric resolutions. Optimal separation of N-imidazole derivatives was obtained using 50 mM phosphate buffer at pH 2.5 containing either HP-alpha-CD or HP-beta-CD (7.5-12.5 mM) at 25 degrees C, with an applied field of 0.50 kV.cm(-1) giving resolution factors Rs superior to 1.70 with migration times of the second enantiomer less than 13 min. The same enantiomer migration order observed for all molecules can be related to a close interaction mechanism with CDs. The influence of structural features of the solutes on Rs and tm was studied. The lipophilic character (log kw) of the solutes and the apparent and averaged association constants of inclusion complexes for four compounds with the six different CDs led us to rationalize the enantioseparation mechanisms. The conclusions were corroborated with reversed-phase high-performance liquid chromatography (HPLC) on chiral stationary phases (CSPs) based on CDs.     

The synthesis and reactivity of the heptanuclear dianion [Os7(CO)20]2− including the synthesis and structural characterizations of the compounds [Os7(CO)20(AuPEt)3 2] and [Os8(CO)20(η6-C6H6]

Reduction of the heptaosmium cluster [Os₇(CO)₂₁] With [Et₄N][NH₄) gives the cluster dianion [Os₇(CO)₂₀]^2–,1, in high yield. The reaction of the dianion with [AuPR ₃Cl] (R=Et or Ph) in the presence of TlPF₆ forms [Os₇((CO)₂₀(AuPR ₃)₂] [R=Et (2a);R = Ph(2b)] in 80% yield, while the corresponding reaction with (Os(C₆H₆)(CH₃CN)₃]²⁺ gives [Os₈(CO)₂₀ ( ⁶-C₆H₆)] (3) in reasonable yield (ca. 30%). The dianion,1, and the clusters2 and3 have been fully characterized by bout spectroscopic and crystallographic methods. The crystal structure of the [Ph₄P]⁺ salt of1 shows that the metals in the anion adopt a capped octahedral geometry, with all twenty carbonyl ligands in terminal sites. The metal core geometry in2a is best described as a tricapped octahedron, and is based on the structure of the dianion1 with two adjacent octahedral faces capped by the Au atoms of the two AuPEt₃ groups. In a similar fashion, the geometry of3 is related to that of1 with the addition of an Os(C₆H₆) unit capped to a triangular face, to give a bicapped octahedral framework.     

Endothermic ion molecule reactions

Endothermic ion-molecule reactions in a tandem mass spectrometer have been used for a number of years for determining thermodynamic quantities, such as heats of formation and proton affinities, for gaseous ions. Recently, the reactive, endothermic collision has been exploited as an analytical technique for the structural analysis of peptides and other biomolecules. The technique is based upon the endothermic transfer of protons associated with amide bonds to ammonia. This reaction proceeds via a long-lived collision complex. When additional beam energy is supplied, other dissociation channels are opened up, leading to the production of sequence ions for the mass-selected, protonated analyte that are normally observed in high energy collision-induced dissociation spectra. The advantage, however, is that such spectra can be produced at very low beam energies. In this article, the rationale for developing this scheme, and its roots in previous ion-molecule studies, are explored.     

A L-RNA aptamer chiral stationary phase for the resolution of target and related compounds

In this paper, we report for the first time an aptamer-based chiral stationary phase (CSP) able to resolve racemates of both target and various related compounds. The enantiomers of tyrosine and analogues (11 enantiomeric pairs) were separated using an immobilized tyrosine-specific L-RNA aptamer as CSP and an aqueous buffer (8 mM Tris-HCl buffer, 25 mM NaCl, 5 mM MgCl2; pH 7.4) as mobile phase, at a column temperature of 10 degrees C. It appeared that the carboxylic and amino groups as well as the aromatic side chain of amino acid controlled the stereospecific recognition. Modifications on the polar groups were strongly detrimental for enantioselectivity while the replacement of the phenolic group by some bicyclic aromatic residues of different polarity, size or shape did not impair the enantioselective interaction. In addition, the effects of the mobile phase composition and column temperature upon the retention and stereoselective properties of the CSP were assessed. Finally, it was found that the immobilized RNA aptamer could be used under hydro-organic mobile phase conditions without alteration of the stationary phase stability.     

Enantiomeric analysis of baclofen analogs by capillary zone electrophoresis, using highly sulfated cyclodextrins: Inclusion ionization constant pKa determination

Using cyclodextrin-capillary zone electrophoresis (CD-CZE), baseline separation of baclofen phaclofen, saclofen, and hydroxy-saclofen, potent gamma-aminobutyric acid(B) (GABA(B)) agonist or antagonists was achieved. A method for the enantioresolution of those analogs of GABA was developed using anionic cyclodextrins (highly sulfated CD or highly S-CD) as chiral selectors and capillaries dynamically coated with polyethylene oxide (PEO). With charged CDs we observed good resolutions due to the large electrophoretic mobility of these chiral selectors opposite to the mobility of the solutes. The highly S-alpha-CD and S-beta-CD were found to be complementary and the most effective complexing agent, allowing good enantiomeric resolution in short runtimes. The complete resolution was obtained using 25 mM phosphate buffer at pH 2.5 containing 3% w/v of highly S-alpha-CD or S-beta-CD at 25 degrees C with an applied field of 0.30 kV/cm. The apparent binding constants of the inclusion complexes were evaluated and the migration order was determined. A comparison was possible to investigate the importance of the anionic group of the molecules in the separations. The pK(a) values were determined for all four compounds in order to explain relative electrophoretic migration of the solutes.     

Synthesis of monodisperse polymers from proteins

Proteins are functional biopolymers; viewed as molecules, they are also monodisperse polyamides with chemically reactive side chains. This paper describes the use of proteins as starting materials for the synthesis of monodisperse polymers with nonbiological functionalities attached to the side chains. It demonstrates the complete derivatization of amine groups (lysine side chains and N-termini) on three different proteins by addition of activated carboxylate reagents in aqueous solutions containing sodium dedecyl sulfate (SDS), under denaturing conditions. Several different acylating reagents were used to generate derivatized proteins; the resulting compounds constitute a new class of monodisperse, semisynthetic polymers, having the potential for wide variation in the structure of the backbone and of the side chains. Modification of lysozyme on a gram scale demonstrated that the method can generate useful quantities of material.     

Electrochemical probing of ground state electronic interactions in polynuclear complexes of a new heteroditopic ligand

The synthesis and electronic properties of dinuclear ([(bipy)2Ru(I)M(terpy)][PF6]4(bipy = 2,2'-bipyridine, terpy = 2,2':6',2'-terpyridine; M = Ru, Os)) and trinuclear ([[(bipy)2Ru(I)]2M][PF6]6 M = Ru, Os, Fe, Co) complexes bridged by 4'-(2,2'-bipyridin-4-yl)-2,2':6',2'-terpyridine (I) have been investigated and are compared with those of mononuclear model complexes. The electrochemical analysis using cyclic voltammetry and differential pulse voltammetry reveals that there are no interactions in the ground state between adjacent metal centres. However, there is strong electronic communication between the 2,2'-bipyridine and 2,2':6',2'-terpyridine components of the bridging ligand. This conclusion is supported by a step-by-step reduction of the dinuclear and trinuclear complexes and the assignment of each electrochemical process to localised ligand sites within the didentate and terdentate domains. The investigation of the electronic absorption and emission spectra reveals an energy transfer in the excited state from the terminating bipy-bound metal centres to the central terpy-bound metal centre. This indicates that the bridge is able to facilitate energy transfer in the excited state between the metal centres despite the lack of interactions in the ground state.     

CIDEP studies of the photolysis of the lignin model compound α-guaiacoxylacetoveratrone: the role of triplet reactions in aqueous and hydroxylic solvents

Free radical reactions induced by the photolysis of the lignin model compound α-guaiacoxylacetoveratrone have been studied by conventional and time-resolved ESR spectroscopy. In the presence of efficient hydrogen donors such as aqueous and hydroxylic solvents the primary reaction involves photoreduction of the triplet phenacyl ether to form the ketyl radical followed by rapid cleavage to the phenacyl radical and guaiacol. Subsequent formation of polarized guaiacoxyl radicals is due to secondary photo-oxidation. The cleavage of the ketyl radical is retarded in basic media and accelerated in acetic acid. Minor reaction pathways involving excited singlets cannot be ruled out by the current CIDEP observations.     

Comprehensive two-dimensional gas chromatography with isotope dilution time-of-flight mass spectrometry for the measurement of dioxins and polychlorinated biphenyls in foodstuffs. Comparison with other methods

A comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry (GC x GC-TOF-MS) experimental setup was tested for the measurement of seven 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs), ten 2,3,7,8-substituted polychlorinated dibenzofurans (PCDFs), four non-ortho-polychlorinated biphenyls (PCBs), eight mono-ortho-PCBs, and six indicator PCBs (Aroclor 1260) in foodstuff samples. A 40m RTX-500 (0.18mm I.D., 0.10 microm df) was used as the first dimension (1D) and a 1.5 m BPX-50 (0.10mm I.D., 0.10 microm df) as the second dimension (2D). The GC x GC chromatographic separation was completed in 45 min. Quantification was performed using 13C-label isotope dilution (ID). Isotope ratios of the selected quantification ions were checked against theoretical values prior to peak assignment and quantification. The dynamic working range spanned three orders of magnitude. The lowest detectable amount of 2,3,7,8-TCDD was 0.2 pg. Fish, pork, and milk samples were considered. On a congener basis, the GC x GC-ID-TOF-MS method was compared to the reference GC-ID high resolution mass spectrometry (HRMS) method and to the alternative GC-ID tandem-in-time quadrupole ion storage mass spectrometry (QIST-MS/MS). PCB levels ranged from low picogram (pg) to low nanogram (ng) per gram of sample and data compared very well between the different methods. For all matrices, PCDD/Fs were at a low pg level (0.05-3 pg) on a fresh weight basis. Although congener profiles were accurately described, RSDs of GC x GC-ID-TOF-MS and GC-QIST-MS/MS were much higher than for GC-ID-HRMS, especially for low level pork and milk. On a toxic equivalent (TEQ) basis, all methods, including the dioxin-responsive chemically activated luciferase gene expression (DR-CALUX) assay, produced similar responses. A cost comparison is also presented.