New film-forming poly(urethane-amide-imide) block copolymers: influence of soft block on membrane properties for the purification of a fuel octane enhancer by pervaporation

A new family of eight poly(urethane-amide-imide) (PUAI) block copolymers with the same hard block and different soft blocks were synthesized in two steps from a dianhydride monomer containing amide functions (4,4′-methylene-bis(trimellitic anhydride-N-phenylamide)) and α,ω-dihydroxy telechelic oligomers which varied in both chemical structure (polyethers: PEG, PTMG, PPG; polyester: PCL) and molar weight (MW ≅ 600 or 1000 g/mol). The PUAI were obtained in high yields (ranging from 81 to 98 wt%) and with reduced viscosities which varied from 0.36 to 0.84 dL/g (for C = 1 mg/mL in DMF at 25 °C). Their characterization by FTIR and ¹H NMR fully confirmed their chemical structure. Their solubility was typically limited to a few wt/vol% even in strong apolar diprotic solvents like DMF and NMP. This particular feature showed the very strong physical cross-linking of their very stiff hard block and enabled to cast membranes capable of withstanding exposure to many common organic solvents. Systematic permeability experiments showed that the PUAI membranes could be used to separate the azeotropic mixture EtOH (20 wt%)/ETBE very easily, with interesting prospects for the purification of ETBE (a fuel octane enhancer used instead of lead derivatives in the European Community). An analysis in terms of structure-property relationships pointed out that the soft block molar weight and polarity were two key parameters for the optimization of selective permeability. The best compromise was obtained with the soft block PEG1000. The corresponding polymer led to performances so far outstanding for polyamideimides with a very high flux of more than 1.1 kg/h m² for a normalized thickness of 5 μm at 50 °C and a selectivity α = 22.7 in the high range for this kind of separation.     

The cyano nitronyl nitroxide radical: experimental and theoretical evidence for the fourth case of the McConnell-I mechanism

The nitronyl nitroxide 2-cyano-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide (1) crystallises in the tetragonal P42(1)m space group with a=7.4050(7), c=8.649(1) A. In the crystal the molecules form layers parallel to the ab plane in which they are orthogonal to each other. In the layers there are close contacts, 2.953(2) A, between the NO groups and the bridging carbon atoms of the O-N-C-N-O fragment of neighbouring radicals. The calculated spin density shows a positive population mainly and equally localised on the NO groups and small but significant negative spin densities on the bridging carbon atom and the cyano nitrogen. Absorption spectra show temperature-dependent transitions related to the magnetic behaviour. The temperature dependence of the magnetic susceptibility in the range 2-300 K reveals that couplings between the radicals are antiferromagnetic, and is interpreted by considering a two-dimensional square array of spin S=1/2 antiferromagnetically coupled (J=-10 cm(-1) and g=2.01). This is interpreted as an exchange coupling through close contact between positive and negative spin densities in orthogonal orbitals on oxygen and carbon atoms, respectively.     

Evidence for an unstable Bi(II) radical from Bi-O bond homolysis. Implications in the rate-determining step of the SOHIO process

The reaction of BiCl(3) with the lithium salt of o-di-tert-butylphenol under nitrogen forms organic oxidation products rather than the expected Bi(OAr)(3) complex, and bismuth disproportionation products. Likewise, the decomposition of Bi(III) aryloxides Bi(O-2,6-(i)Pr(2)C(6)H(3))(3) and ClBi(O-2,4,6-(t)Bu(3)C(6)H(2))(3) leads to corresponding organic oxidation products. These reactions can be explained by Bi-O bond homolysis to form unstable Bi(II) radicals, analogous to a fundamental step suggested to intervene in the SOHIO process.     

A New Method to Prepare Transition Metal Salts of Bulk and Supported Heteropolyacids. Application to the Catalysis of the Oxidative Dehydrogenation of Isobutyric Acid

Transition metal salts of heteropolyacids have been prepared taking into account the strong acidic and cation exchanging properties of the solid heteropolyacids. The exchange between protons and the transition metal cation is carried out by stirring a suspension of the hydrated heteropolyacid in a solution of the metal acetylacetonate complex in toluene. The exchange occurs on the surface of the solid particles and diffusion of protons and metal cations into the hydrated lattice leads to the substitution of all the protons. The method can be utilized in order to prepare supported vanadyl and copper molybdophosphates from supported heteropolyacids and they have been studied in the catalysis of the oxidative dehydrogenation of isobutyric acid. The effect of vanadyl counter-ions on the catalytic behavior is the same as observed with bulk catalysts but, on the contrary, copper supported molybdophosphate shows an acid catalytic activity not observed with bulk catalysts.     

Stereospecific synthesis of enamines from α,β-epoxysilanes

Isomerically pure cis and trans enamines were prepared from α,β-epoxysilanes by alumina-assisted ring opening with pyrrolidine and morpholine followed by β-elimination.     

Crystallographic evidence of hexacoordination at phosphorus via intramolecular coordination of donor groups on phosphane and phosphane sulphide

The X-ray structure analysis of bis(8-dimethylamino-l-naphthyl)phenylphosphane (3) and of the corresponding sulphide 4 has revealed hexacoordination at phosphorus in both cases, the N … P separations being less than the sum of the van der Waal radii. Furthermore, in both cases the overall geometry corresponds to a distorted bicapped tetrahedron. The optimum geometry calculated for 4 via the program developed by Autodesk (MM + method) suggests that the structure of the molecule is a function not only of steric requirements but also of electronic effects.     

Comparative analysis by gas chromatography-mass spectrometry of the essential oils from bark and leaves of Cedrelopsis grevei Baill, an aromatic and medicinal plant from Madagascar

The essential oils from bark and leaves of Cedrelopsis grevei Baill (Ptaeroxylaceae), an aromatic and medicinal plant from Madagascar, are widely used in folk medicine. These two commercially available oils have been examined separately by means of GC-MS. The oil constituents were identified according to their mass spectra and their relative retention indices determined on both polar and non-polar stationary phase capillary columns. A total of 55 compounds have been identified constituting 76.7% (bark) and 91.6% (leaves) of the volatile constituents. Both oils were found to have a similar composition; however the relative percentages of some compounds notably differed. The bark essential oil contained beta-pinene (17.1%), cis-sesquisabinene hydrate (12.8%) and caryophyllene oxide (7.0%) as the main components whereas the leaf essential oil was largely dominated by trans-beta-farnesene (35.6%); beta-pinene (12.8%), cis-sesquisabinene hydrate (9.8%) and ar-curcumene (8.6%) were also present as major components. As far as we know, this is the first report on the Cedrelopsis grevei bark and leaf essential oils which therapeutic properties may be attractive for aromatherapy.     

Room temperature, high-yield synthesis of multiple shapes of gold nanoparticles in aqueous solution

A seed-mediated growth method was used to control the morphology and dimensions of Au nanocrystals by the manipulation of the experimental parameters in aqueous solution at room temperature. This chemical route produces various structural architectures with rod-, rectangle-, hexagon-, cube-, triangle-, and starlike profiles and branched (such as bi-, tri-, tetra-, and multipod) Au nanocrystals of various dimensions in high yield in the presence of a single surfactant, cetyltrimethylammonium bromide.     

Additives for the stabilization of double-stranded DNA in UV-MALDI MS

Molecular complexes such as double-stranded oligonucleotides contain non-covalent bonds that are difficult to maintain in the MALDI experiment. Quantifiers are introduced in order to evaluate, summarize, and compare spectra from experiments in which additives are used to stabilize duplex oligonucleotides. Compounds known to complex with and stabilize duplex molecules can be useful as additives in MALDI. Spermine and methylene blue, present at concentrations similar to the matrix, are detected, bound to the duplex. When peptides are used as additives, the duplex is stabilized when the peptide is present at an amount less than that of the duplex.