Synthesis and structural characterization of syndiotactic trans‐1,2 and cis‐1,2 polyhexadienes

The (E) isomer in mixtures of (E) and (Z) 1,3‐hexadiene was polymerized with the system CoCl₂(PⁱPrPh₂)₂‐MAO, a highly active and stereospecific catalyst for the preparation of 1,2 syndiotactic polybutadiene. A new crystalline polymer with a melting point of 109 °C was obtained. The polymer was characterized by IR, NMR (¹³C, ¹H in solution and ¹³C in the solid‐state), X‐ray diffraction, DSC, GPC and it was found to have a trans‐1,2 syndiotactic structure with a 5.18 ± 0.04 Å fiber periodicity. Since only the (E) isomer was polymerized, at the end of the reaction we were able to separate the (Z) isomer, which was ultimately polymerized with CpTiCl₃‐MAO at low temperature, obtaining a low molecular weight, stereoregular polymer that, characterized by IR and NMR methods, was found to exhibit a cis‐1,2 syndiotactic structure, never reported before. Molecular mechanics calculations were carried out on the trans‐1,2 syndiotactic polymer and structural models consistent with the X‐ray diffraction data are proposed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5339–5353, 2007     

Orthogonal chain length control in calix[5]arene-based AB-type supramolecular polymers

New AB-type supramolecular polymers have been prepared by acid-promoted self-assembly of an aminododecyloxy-calix[5]arene monomer precursor. The number-average degree of polymerization has been found to be dependent on the concentration of the salt monomer and on the nature of the counterion (i.e., chloride, picrate or hexafluorophosphate).Chain-length regulation experiments have been carried out, employing orthogonal chain stoppers capable of selectively interacting with a given moiety of the AB-type monomer/polymer. Competitive calix[5]arene ‘caps’ and n-butylammonium ion ‘plugs’ have been used to control the extent of self-assembly of the polymer, in turn interacting with the ammoniumdodecyloxy or with the cavity end-groups of the supramolecular calixarene assembly. These experiments, conveniently carried out at a 10 mM concentration, can be easily followed by ¹H NMR spectroscopy.     

Characterization of Basil Volatile Fraction and Study of Its Agronomic Variation by ASCA

Basil is a plant known worldwide for its culinary and health attributes. It counts more than a hundred and fifty species and many more chemo-types due to its easy cross-breeds. Each species and each chemo-type have a typical aroma pattern and selecting the proper one is crucial for the food industry. Twelve basil varieties have been studied over three years (2018–2020), as have four different cuts. To characterize the aroma profile, nine typical basil flavour molecules have been selected using a gas chromatography–mass spectrometry coupled with an olfactometer (GC–MS/O). The concentrations of the nine selected molecules were measured by an ultra-fast CG e-nose and Principal Component Analysis (PCA) was applied to detect possible differences among the samples. The PCA results highlighted differences between harvesting years, mainly for 2018, whereas no observable clusters were found concerning varieties and cuts, probably due to the combined effects of the investigated factors. For this reason, the ANOVA Simultaneous Component Analysis (ASCA) methodology was applied on a balanced a posteriori designed dataset. All the considered factors and interactions were statistically significant (p < 0.05) in explaining differences between the basil aroma profiles, with more relevant effects of variety and year.     

Surface Functionalization of Face Masks with Cold Plasma and Its Effect in Anchoring Polyphenols Extracted from Agri-Food

To improve the capability of non-woven polypropylene-based fabric (NWF-PP) used for face mask production to retain active biomolecules such as polyphenols, the surface functionalization of NWF-PP–directly cut from face masks–was carried out by employing cold plasma with oxygen. The nature/structure of the functional groups, as well as the degree of functionalization, were evaluated by ATR-FTIR and XPS by varying the experimental conditions (generator power, treatment time, and oxygen flow). The effects of plasma activation on mechanical and morphological characteristics were evaluated by stress–strain measurements and SEM analysis. The ability of functionalized NWF-PP to firmly anchor polyphenols extracted from cloves was estimated by ATR-FTIR analysis, IR imaging, extractions in physiological solution, and OIT analysis (before and after extraction), as well as by SEM analysis. All the results obtained converge in showing that, although the plasma treatment causes changes–not only on the surface–with certain detriment to the mechanical performance of the NWF-PP, the incorporated functionalities are able to retain/anchor the active molecules extracted from the cloves, thus stabilizing the treated surfaces against thermo-oxidation even after prolonged extraction.     

Enzymatic erosion of bioartificial membranes to control drug delivery

The preparation of an enzymatic controlled drug release system from blends of PVA/starch/alphaA, in the form of films, is described. It was shown that alphaA hydrolyses the starch within these films, resulting in a time-dependent change of the porosity in the matrix. Films were characterized by calorimetric analysis to study the interactions between the enzyme and the polymeric constituents at the molecular level. The presence of alphaA, in fact, influenced the PVA crystallization in the blends. Release tests and permeability experiments were carried out to evaluate the transport properties of the films. An increase in porosity and permeability was observed by increasing alphaA content (16-28 wt.-%). Films loaded with theophylline and caffeine were also prepared to analyze drug release properties of the matrix. Drug release kinetics were coherent with the measured changes in porosity: at higher alphaA concentrations the amount of released drug increased under the influence of diffusion and erosion processes. The results obtained are promising for the realization of drug delivery devices for a rapid release or for the release of poorly soluble drugs which usually remain entrapped in the matrix.SEM images of a PVA/starch/alphaA film before (A) and after (B) the erosion.     

NMR studies of the Zn2+ interactions with rat and human beta-amyloid (1-28) peptides in water-micelle environment

Alzheimer's disease is a fatal neurodegenerative disorder involving the abnormal accumulation and deposition of peptides (amyloid-beta, Abeta) derived from the amyloid precursor protein. Here, we present the structure and the Zn2+ binding sites of human and rat Abeta(1-28) fragments in water/sodium dodecyl sulfate (SDS) micelles by using 1H NMR spectroscopy. The chemical shift variations measured after Zn2+ addition at T>310 K allowed us to assign the binding donor atoms in both rat and human zinc complexes. The Asp-1 amine, His-6 Ndelta, Glu-11 COO-, and His-13 Nepsilon of rat Abeta28 all enter the metal coordination sphere, while His-6 Ndelta, His-13, His-14 Nepsilon, Asp-1 amine, and/or Glu-11 COO- are all bound to Zn2+ in the case of human Abeta28. Finally, a comparison between the rat and human binding abilities was discussed.     

Structural features of the Cu(II) complex with the rat Abeta(1-28) fragment

The interaction between Cu(II) and the rat amyloid beta (1-28) fragment in micellar solutions at pH 7.5 was investigated by CD and NMR spectroscopy; the proton-copper distances were used in restrained molecular dynamics simulations to obtain a structural model of the Cu(II) complex.     

Clustering dynamics in water/methanol mixtures: a nuclear magnetic resonance study at 205 k<T<295 k

Proton nuclear magnetic resonance (1H NMR) experiments have been performed to measure the spin-lattice, T1, and spin-spin, T2, relaxation times of the three functional groups in water/methanol mixtures at different methanol molar fractions (XMeOH=0, 0.04, 0.1, 0.24, 0.5, 1) as a function of temperature in the range 205 K相似文献   

Determination of Mercury with a Miniature Sensor for Point-of-care Testing

In developing countries, subsistence gold mining entails mixing metallic mercury with crushed sediments to extract gold. In this approach, the gold−mercury amalgam is heated to evaporate mercury and obtain gold. Thus, the highly volatile mercury can be absorbed through inhalation, resulting in adverse health effects. Urinalysis can be used to detect mercury, which is excreted in urine and feces, and correlate exposure with toxic effects. The current gold standard analytical methods are based on fluorescence or inductively coupled plasma mass spectrometry methods, but are expensive, time consuming, and are not easily accessible in countries where testing is needed. In this work, we report on a miniature electrochemical sensor that can rapidly detect mercury in urine at levels well below the US Biological Exposure Index (BEI) limit of 50 ppb (μg/L). The sensor is based on a thin-film gold electrode and anodic stripping voltammetry electroanalytical approach. The sensor successfully detected mercury at trace levels in urine, with a limit of detection of ∼15 ppb Hg in the linear range of 20–80 ppb. With the low-cost disposable sensors and portable instrumentation, it is well suited for point-of-care applications.     

Artarborol, a nor-caryophyllane sesquiterpene alcohol from Artemisia arborescens. stereostructure assignment through concurrence of NMR data and computational analysis

A nor-caryophyllane derivative, artarborol, has been isolated from wormwood (Artemisia arborescens) and its stereostructure established by using a combination of chemical derivatization, NMR data, molecular modeling, and quantum-mechanical calculations. In particular, comparison of experimental 13C NMR data with a Boltzmann-weighed average of 13C NMR chemical shifts, calculated by ab initio DFT method, supported the stereochemical assignment.