Capillary gas chromatographic-mass spectrometric study of the effect of solvents on metoprolol and other aryloxypropanolamines

When metoprolol in methanol was analysed by capillary gas chromatography (GC), an additional peak was observed; mass spectrometry (MS) showed this additional peak to have a molecular weight 12 dalton higher than that of the parent compound. A similar phenomenon was observed with other beta-adrenergic blocking aryloxypropanolamines in methanol or dichloromethane. Capillary GC-MS using deuterated solvents as isotopic markers showed that a methylene group from the solvents was incorporated into the parent molecule. The structure of the observed products and the mechanism of their formation are proposed.     

油溶和水溶性羰基引发剂的光化学

本文回顾了在羰基引发剂的作用下烯烃单体光引发聚合的最新机理。报道了有关多种当前通用的新型羰基引发剂的光物理和光化学的近期工作,其中包括 UV 吸收,发光光谱和闪光光解的研究。还报道了油溶性引发剂对丙烯酸丁酯的光聚合效应。证明油溶性引发剂实质上是经过三重态来起作用,其中包含一个从溶剂中攫取氢的引发步骤。对于硫杂蒽酮衍生物来说,它们从叔胺接受电子的能力及其光聚合效应之间有一定的关系。从闪光光解获得的证据说明在这种情况下存在着自由基阴离子,但是基于二苯酮和苯基酮的引发剂则没有。预料后者直接从胺攫氢是通过三重态羰基或是引发剂的自由基。有证据表明联苯甲酰主要是通过光裂解来起作用。水溶性硫杂蒽酮引发剂的作用主要是经过单重态,其中包含引发时攫氢一步。在这种情况下,自由基的形成不受氧的影响。     

Evaluation of the Use of Elicitors for the Production of Antioxidant Compounds in Liquid Cultures of Ganoderma curtisii from Costa Rica

The use of substances or conditions as elicitors can significantly increase the production of secondary metabolites. In this research, the effects of different elicitors on the production of antioxidant secondary metabolites were evaluated in a strain of Ganoderma sp. The elicitors tested were pH changes in different growth phases of the fungus (pH 3, 5.5 and 8), different concentrations of peptone as a nitrogen source (1 g/L and 10 g/L), and the addition of chemical agents to the culture medium (ethanol, growth regulators, and salts). The alkaline pH during the stationary phase and the high availability of nitrogen were effective elicitors, producing cultures with higher antioxidant activity (37.87 g/L and 43.13 g/L dry biomass) although there were no significant differences with other treatments.     

Photostabilization study of ethylene-butyl acrylate copolymers functionalized in the molten state with hindered amine light stabilizers (HALS)

Hindered Amine Light Stabilizers (HALS), N-methylated and O-alkylhydroxylamine, were successfully anchored onto an ethylene-co-butyl acrylate (BA) by a transesterification reaction in the molten state. The content of HALS bonded to the EBA was calculated from the atomic ratio (N/C) determined by X-ray Photoelectron Spectroscopy (XPS). After reaction times of 5–30 min in the molten state the content of bonded HALS attained values from 0.17 to 0.63%. The modified EBA with HALS were studied by Chemiluminescence emission and the photostabilization effect was evaluated under accelerated ageing in the presence of pesticides. The antioxidant effect of HALS bonded to EBA was evaluated by determination of Carbonyl Index (CI) and retention of elongation at break as a function of exposure time and pesticide treatment. The stability of the EBA with anchored HALS exhibited higher performance as shown by low CI-values and correlated with the content of bound HALS and the thermal history of the materials. Also, mechanical properties correlated well with the CI results and the photostabilization of bound HALS was effective until 3150 h of exposure time using pesticides.     

Are Collapse Models Testable via Flavor Oscillations?

Collapse models predict the spontaneous collapse of the wave function, in order to avoid the emergence of macroscopic superpositions. In their mass-dependent formulation, they claim that the collapse of any system’s wave function depends on its mass. Neutral K, D, B mesons are oscillating systems that are given by Nature as superposition of two distinct mass eigenstates. Thus they are unique laboratory for testing collapse models that are sensitive to the mass. In this paper we derive—for the single mesons and bipartite entangled mesons—the effect of the mass-proportional CSL (Continuous Spontaneous Localization) collapse model on the dynamics on neutral mesons. We compare the theoretical prediction with experimental data from different accelerator facilities.     

Estimation of radon and thoron caused dose at exraction and processing sites of mineral sand mining area in Vietnam (HA TINH province)

Mineral sands are mined in several countries to supply to the titanium and zircon producing industries. Coastal black mineral sands usually contain, besides ilmenite (FeTiO₃) and rutile (TiO₂), radioactive minerals such as zircon (ZrSiO₄) and monazite (RePO₄). Radon and thoron activity concentration originated from natural radioactive contents of the black mineral sand was monitored at the extraction and processing for black minerals in the coastal areas of Ha Tinh Province, one of the around 40 coastal mineral sand deposits in Vietnam. The survey was carried out with the Raduet chambers made by Radosys Ltd—Hungary. The obtained results for 25 investigated points show that the measured values are not high in the residential houses and in case of the sand extraction site as well. At the titanium processing plant the measured values were higher than outside the facility (Radon: 18–55 Bq/m³ with average of 34 Bq/³ and Thoron 33–118 Bq/m³ with average of 58 Bq/m³) but still comparable to the average concentration of the world published by UNSCEAR. The typical outdoor levels of radon and thoron gas are each of the order of 10 Bq/m³. Although the radon concentrations were low in the zircon and titanium processing plants, the thoron concentrations in the houses for separating rutile and zircon were very high. At zircon processing factory, the thoron concentration could reach 2,931 Bq/m³ and the estimated annual effective dose would be 21.4 mSv/a. Intervention has to be taken in order to reduce the thoron level in this factory since the level of thoron and its progenies corresponding to an annual occupational effective dose is beyond the action level of 6 mSv/a.     

Nonlinear spectral-spatial control and localization of supercontinuum radiation

We present the first observation of spatiospectral control and localization of supercontinuum light through the nonlinear interaction of spectral components in extended periodic structures. We use an array of optical waveguides in a LiNbO3 crystal and employ the interplay between diffraction and nonlinearity to dynamically control the output spectrum of the supercontinuum radiation. This effect presents an efficient scheme for optically tunable spectral filtering of supercontinua.     

Chemical Antibody Mimics Inhibit Cadherin-Mediated Cell–Cell Adhesion: A Promising Strategy for Cancer Therapy

One of the most promising strategies to treat cancer is the use of therapeutic antibodies that disrupt cell–cell adhesion mediated by dysregulated cadherins. The principal site where cell–cell adhesion occurs encompasses Trp2 found at the N-terminal region of the protein. Herein, we employed the naturally exposed highly conserved peptide Asp1-Trp2-Val3-Ile4-Pro5-Pro6-Ile7, as epitope to prepare molecularly imprinted polymer nanoparticles (MIP-NPs) to recognize cadherins. Since MIP-NPs target the site responsible for adhesion, they were more potent than commercially available therapeutic antibodies for inhibiting cell–cell adhesion in cell aggregation assays, and for completely disrupting three-dimensional tumor spheroids as well as inhibiting invasion of HeLa cells. These biocompatible supramolecular anti-adhesives may potentially be used as immunotherapeutic or sensitizing agents to enhance antitumor effects of chemotherapy.     

An Edible Oil Enriched with Lycopene from Pink Guava (Psidium guajava L.) Using Different Mechanical Treatments

According to the regulations of the United States Food and Drug Administration (FDA), organic solvents should be limited in pharmaceutical and food products due to their inherent toxicity. For this reason, this short paper proposes different mechanical treatments to extract lycopene without organic solvents to produce an edible sunflower oil (SFO) enriched with lycopene from fresh pink guavas (Psidium guajava L.) (FPGs). The methodology involves the use of SFO and a combination of mechanical treatments: a waring blender (WB), WB+ high-shear mixing (HSM) and WB+ ultrafine friction grinding (UFFG). The solid:solvent (FPG:SFO) ratios used in all the techniques were 1:5, 1:10 and 1:20. The results from optical microscopy and UV–vis spectroscopy showed a correlation between the concentration of lycopene in SFO, vegetable tissue diameters and FPG:SFO ratio. The highest lycopene concentration, 18.215 ± 1.834 mg/g FPG, was achieved in WB + UFFG with an FPG:SFO ratio of 1:20. The yield of this treatment was 66% in comparison to the conventional extraction method. The maximal lycopene concentration achieved in this work was significantly higher than the values reported by other authors, using high-pressure homogenization for tomato peel and several solvents such as water, SFO, ethyl lactate and acetone.