Synthesis and Characterization of Sol-Gel Cu-ZrO2 and Fe-ZrO2 Catalysts

Fe-ZrO₂ and Cu-ZrO₂ xerogels were prepared by a sol-gel method. The effect of the hydrolysis catalyst during the gelation step, namely H₂SO₄ or NH₄OH, on the properties of the resulting materials was investigated by XRD, BET, TGA/DTA, TPD of ammonia, FTIR, and TPR. Fe-ZrO₂ and Cu-ZrO₂ xerogels, with sulfuric acid introduced as the hydrolysis catalyst, mainly crystallyzed in the tetragonal phase and exhibited larger surface area and acid amount than those obtained with NH₄OH. Ammonia TPD shows that copper promoted sulfated zirconia is the most acidic material. TGA and FTIR reveal that under oxidizing conditions sulfated zirconia promoted with iron and copper retains more sulfate species than unpromoted sulfated zirconia. Regardless of the hydrolysis catalyst employed, copper promoted catalysts calcined at 600°C, contain a large fraction of copper oxide specieseasily reduced at low temperatures. These copper oxide species are believed to have different environment and interactions with the surface oxygen vacancies of the zirconia support. A FeO-like phase appears to be the most probable one after reduction of Fe-ZrO₂ catalysts prepared with NH₄OH as the hydrolysis catalyst. The formation of Fe° species may be hindered by the high dispersion and interaction of Fe²⁺ ions with the zirconia support. On the other hand, the reduction peaks of iron oxide and sulfate species exhibit a considerable overlap in the TPR profiles of sulfated Fe-ZrO₂ samples. Hence, the nature of the supported phase in the latter samples is rather uncertain.     

Trapping of a particle in a short-range harmonic potential well

Eigenstates of a particle in a localized and unconfined harmonic potential well are investigated. Effects due to the variation of the potential parameters as well as certain results from asymptotic expansions are discussed.     

Dual Nucleophilic Substitution Reactions of O,O‐Diethyl 2,4‐dinitrophenyl Phosphate and Thionophosphate Triesters

The reactions of the title compounds with phenoxides, secondary alicyclic (SA) amines, and pyridines, in 44 wt% ethanol–water, at 25°C and an ionic strength of 0.2 M, were subjected to kinetic and product studies. From analytical techniques (HPLC and NMR), two pathways were detected (nucleophilic attack at the phosphoryl center and at the C‐1 aromatic carbon) for the reactions of all the nucleophiles with the phosphate ( 2 ) and for the pyridinolysis of the thionophosphate ( 1 ). Only aromatic nucleophilic substitution was found for the reactions of 1 with phenoxides and SA amines. For the dual reactions, the nucleophilic rate constants (k_N) were separated in two terms: $k_{\rm N}^{\rm P}$ and $k_{\rm N}^{{\rm Ar}}$, which are the rate constants for the corresponding electrophilic centers. The absence of a break in the Brønsted‐type plots for the attack at P is consistent with concerted mechanisms. The Brønsted slopes, β_Ar 0.32–0.71, for the attack at the aromatic C‐1, are in agreement with stepwise mechanisms where formation of a Meisenheimer complex is the rate‐determining step. © 2013 Wiley Periodicals, Inc. Int J Chem Kinet 45: 202–211, 2013     

Simple technique for the simultaneous determination of solvent diffusion coefficient in polymer by Quantum Resistive Sensors and FT‐IR spectroscopy

A simple, quick and novel method for the determination of diffusion properties through polymer films, based on Quantum Resistive Sensors made of Conductive Polymer nanoComposites is presented. The integral time lag method is employed for the calculation of diffusion coefficient, and the results are compared simultaneously with that of Fourier transform infrared spectroscopy and sorption method. Two model polymers, a semi‐crystalline poly(lactic acid) and an amorphous poly(isobutylene‐co‐isoprene), are used to validate the study. A good correlation is established between the diffusion coefficient values derived from all techniques demonstrating the interest of such reliable, simple and cheap nanosensors for the quick determination (several minutes) of diffusion properties in polymer films. Our first results suggest that this technique is meaningful for the determination of barrier properties in nanocomposite membranes filled with platelets of graphene or clay. Copyright © 2013 John Wiley & Sons, Ltd.     

Insight into industrial PLA aging process by complementary use of rheology,HPLC, and MALDI

Nowadays, there is a growing availability of biodegradable industrial materials intended to food contact applications whose service life behavior needs to be further investigated. This article is focused on the degradation of two materials based on polylactic acid. The correlation between the rate of degradation and the amount of trapped degradation products was investigated applying three characterization techniques in parallel, namely rheology, high‐performance liquid chromatography (HPLC), and matrix‐assisted laser desorption/ionization (MALDI). The rate of degradation was studied through the evaluation of their rheological properties and calculation of the number of average molecular weights, and weight‐average molecular weights. Water‐soluble oligomers and lactic acid were quantified by HPLC‐ultraviolet. Changes in cyclic and linear oligomers were monitored by MALDI‐time‐of‐flight mass spectrometry. Specimens of 4‐mm thickness of each biopolymer were subjected to hydrolysis in deionized water up to 6 months at two temperatures, simulating service conditions of food packaging. The diminution in viscosity and consequently in molecular weight distribution (20–60%) showed the degradation of the molecular structure of both polylactic acids. The chain scission was followed through the increasing values of lactic acid and hydrolyzed oligomers (twofold to eightfold), and the predominant signal of the linear oligomers over the cyclic ones with aging. Rheology, HPLC, and MALDI showed to be complementary tools to better understand the changes in the molecular structure. The obtained results showed the necessity of adding suitable stabilizers for each particular food packaging application. Copyright © 2013 John Wiley & Sons, Ltd.     

A Simple Method for Producing Pure (+) trans-1,2-Epoxylimonene

In this paper we report a simple methodology for obtaining (+) trans - 1,2 - epoxylimonene (1b) in high purity (>99% HRGC) and reasonable quantity. The mixture of 1a and 1b in CH₂Cl₂ is stirred with 1M NaHSO₃ in water. Under these conditions 1a is completely destroyed, while 1b is only partially destroyed.     

Simulation of mesogenic diruthenium tetracarboxylates: Development of a force field for coordination polymers of the MMX type

A classical molecular mechanics force field, able to simulate coordination polymers (CP) based on ruthenium carboxylates (Ru₂(O₂CR_eq)₄L_ax) (eq = equatorial group containing aliphatic chains, L_ax= axial ligand), has been developed. New parameters extracted from experimental data and quantum calculations on short aliphatic chains model systems were included in the generalized AMBER force field. The proposed parametrization was evaluated using model systems with known structure, containing either short or long aliphatic chains; experimental results were reproduced satisfactorily. This modified force field, although in a preliminary stage, could then be applied to long chain liquid crystalline compounds. The resulting atomistic simulations allowed assessing the relative influence of the factors determining the CP conformation, determinant for the physical properties of these materials. © 2013 Wiley Periodicals, Inc.     

Tailored pump-probe transient spectroscopy with time-dependent density-functional theory: controlling absorption spectra

Recent advances in laser technology allow us to follow electronic motion at its natural time-scale with ultra-fast time resolution, leading the way towards attosecond physics experiments of extreme precision. In this work, we assess the use of tailored pumps in order to enhance (or reduce) some given features of the probe absorption (for example, absorption in the visible range of otherwise transparent samples). This type of manipulation of the system response could be helpful for its full characterization, since it would allow us to visualize transitions that are dark when using unshaped pulses. In order to investigate these possibilities, we perform first a theoretical analysis of the non-equilibrium response function in this context, aided by one simple numerical model of the hydrogen atom. Then, we proceed to investigate the feasibility of using time-dependent density-functional theory as a means to implement, theoretically, this absorption-optimization idea, for more complex atoms or molecules. We conclude that the proposed idea could in principle be brought to the laboratory: tailored pump pulses can excite systems into light-absorbing states. However, we also highlight the severe numerical and theoretical difficulties posed by the problem: large-scale non-equilibrium quantum dynamics are cumbersome, even with TDDFT, and the shortcomings of state-of-the-art TDDFT functionals may still be serious for these out-of-equilibrium situations.     

Chemical composition,antioxidant and cytotoxic activities of extracts from the leaves of Smilax brasiliensis Sprengel (Smilacaceae)

The antioxidant and cytotoxic activities of petroleum ether and methanol extracts, fatty acids and methyl esters from leaves of Smilax brasiliensis were evaluated, and the composition of the extracts was determined. Palmitic, linoleic and linolenic acids were major components of the extracts. For antioxidant activity, all samples exhibited IC₅₀ values lower than BHT (2,6-di-tert-butyl-4-methylphenol). The extracts, fatty acids and methyl esters from S. brasiliensis presented no toxicity to larvae of the brine shrimp, Artemia salina. Among the purified substances, only methyl linolenate showed toxicity (LD₅₀ = 21.47 μg/mL). This study showed, for the first time, the composition of petroleum ether and methanol extracts from S. brasiliensis leaves, as well as the antioxidant and cytotoxic activities of extracts, fatty acids and methyl esters.