Comparison of the Kerr effect and X-ray pole figure methods for determining crystallographic texture in PrFeB magnets

In this study, magnetic domains in Pr₁₆Fe₇₆B₈ sintered magnets have been observed by Kerr effect and a histogram of the angular distribution of domain orientations has been used to determine the magnetic texture (cos Φ). The degree of easy-axis alignment of Pr₂Fe₁₄B matrix grains in these magnets has been also determined by X-ray pole figure analysis using the (0 0 4) reflection. The (0 0 4) pole figure measurements were carried out by the Schultz's reflection method. The (0 0 4) normalized intensity data has been fitted for a Gaussian distribution and the degree of crystal alignment, cos Θ, has been calculated using the Stoner–Wohlfarth model. Comparison of these methods has been carried out. It has been shown that in magnets with medium and high degrees of crystallographic alignment, the pole figure values are higher than that obtained by the Kerr effect method. Conversely, in magnets with low degrees of alignment, cos Θ is lower than cos Φ.     

Biased bilayer graphene: semiconductor with a gap tunable by the electric field effect

We demonstrate that the electronic gap of a graphene bilayer can be controlled externally by applying a gate bias. From the magnetotransport data (Shubnikov-de Haas measurements of the cyclotron mass), and using a tight-binding model, we extract the value of the gap as a function of the electronic density. We show that the gap can be changed from zero to midinfrared energies by using fields of less, approximately < 1 V/nm, below the electric breakdown of SiO2. The opening of a gap is clearly seen in the quantum Hall regime.     

Optical locking of two semiconductor lasers through high-order Brillouin Stokes components in optical fiber

A novel technique for optical injection locking of two semiconductor lasers through high-order Brillouin Stokes components in optical fiber is proposed and experimentally demonstrated. The configuration potentially provides microwave signals generation at manifold Brillouin frequency without high-frequency external modulator and generator. Significant narrowing of the locked slave semiconductor laser linewidth was recorded.     

Tailored pump-probe transient spectroscopy with time-dependent density-functional theory: controlling absorption spectra

Recent advances in laser technology allow us to follow electronic motion at its natural time-scale with ultra-fast time resolution, leading the way towards attosecond physics experiments of extreme precision. In this work, we assess the use of tailored pumps in order to enhance (or reduce) some given features of the probe absorption (for example, absorption in the visible range of otherwise transparent samples). This type of manipulation of the system response could be helpful for its full characterization, since it would allow us to visualize transitions that are dark when using unshaped pulses. In order to investigate these possibilities, we perform first a theoretical analysis of the non-equilibrium response function in this context, aided by one simple numerical model of the hydrogen atom. Then, we proceed to investigate the feasibility of using time-dependent density-functional theory as a means to implement, theoretically, this absorption-optimization idea, for more complex atoms or molecules. We conclude that the proposed idea could in principle be brought to the laboratory: tailored pump pulses can excite systems into light-absorbing states. However, we also highlight the severe numerical and theoretical difficulties posed by the problem: large-scale non-equilibrium quantum dynamics are cumbersome, even with TDDFT, and the shortcomings of state-of-the-art TDDFT functionals may still be serious for these out-of-equilibrium situations.     

Operation of a 32 GHz gyrotron

The design and operation of a 32 GHz pulsed gyrotron are reported. The device is step-tuned between the TE_1,2 (24.16 GHz) and TE_0,2 (31.78 GHz) modes with cathode voltages ranging from 30 to 40kV and beam current up to 5.0A. Experimental frequencies are in close agreement with the self-consistent calculated values and in the TE_2,2 resonator mode an output peak power of 6kW corresponding to an 18% efficiency was measured by using a fast response calorimeter with a thermal sensitivity of 0.1°C/Wmin.     

Investigation of a Pt–Fe/C catalyst for oxygen reduction reaction in direct ethanol fuel cells

Three cathode catalysts (60% Pt/C, 30% Pt/C and 60% Pt–Fe/C), with a particle size of about 2–3 nm, were prepared to investigate the effect of ethanol cross-over on cathode surfaces. All samples were studied in terms of structure and morphology by using X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses. Their electrocatalytic behavior in terms of oxygen reduction reaction (ORR) was investigated and compared using a rotating disk electrode (RDE). The tolerance of cathode catalysts in the presence of ethanol was evaluated. The Pt–Fe/C catalyst showed both higher ORR activity and tolerance to ethanol cross-over than Pt/C catalysts. Moreover, the more promising catalysts were tested in 5 cm² DEFC single cells at 60 and 80 °C. An improvement in single cell performance was observed in the presence of the Pt–Fe catalyst, due to an enhancement in the oxygen reduction kinetics. The maximum power density was 53 mW cm⁻² at 2 bar rel. cathode pressure and 80 °C.     

Sample Preparation for the Determination of Metals in Food Samples Using Spectroanalytical Methods—A Review

Abstract

The present article gives an overview of recent publications and modern techniques of sample preparation for food analysis employing atomic and inorganic mass spectrometric techniques, such as flame atomic absorption spectrometry, chemical vapor generation atomic absorption and atomic fluorescence spectrometry, graphite furnace atomic absorption spectrometry, inductively coupled plasma optical emission spectrometry, and inductively coupled plasma mass spectrometry. Among the most frequently applied sample preparation techniques for food analysis are dry ashing, usually with the addition of an ashing aid, and acid digestion, preferably with the assistance of microwave energy. Slurry preparation, particularly with the assistance of ultrasound, is increasingly used to reduce acid consumption and sample preparation time. Direct analysis of solid samples is gaining importance in the field of food analysis as it offers the highest sensitivity, avoids the use of acids and other aggressive reagents, makes possible the analysis of micro‐samples, and can be applied for fast screening analysis, e.g., of fresh meat.     

A Fluorescent and Phosphorescent Nanoporous Solid: Crystalline Calix[4]arene

Calix[4]arene forms elongated nanoporous microcrystals. The pores are linear nano-channels (1.7 nm diameter) arranged in a honeycomb network. The crystals luminesce at room temperature according to a variety of processes that include monomer fluorescence (lifetime of ca. 1.1 ns), dimer fluorescence (lifetime of ca. 5.4 ns), and monomer phosphorescence (lifetime of ca. 2 s). The dimers result from pi-orbital overlap of adjacent phenol groups from neighboring nano-channels, with C-C distances of ca. 4 A.