Quick assessment methodology for reliability of solder joints in ball grid array (BGA) assembly—Part I: Creep constitutive relation and fatigue model

In this study, a new unified creep constitutive relation and a modified energy-based fatigue model have been established respectively to describe the creep flow and predict the fatigue life of Sn−Pb solders. It is found that the relation successfully elucidates the creep mechanism related to current constitutive relations. The model can be used to describe the temperature and frequency dependent low cycle fatigue behavior of the solder. The relation and the model are further employed in part II to develop the numerical simulation approach for the long-term reliability assessment of the plastic ball grid array (BGA) assembly. The project supported by the National Natural Science Foundation of China (59705008)     

Hybrid ceramic nanosieves: stabilizing nanopores with organic links

Unprecedented hydrothermal stability in functional membranes has been obtained with hybrid organic-inorganic nanoporous materials, enabling long-term application in energy-efficient molecular separation, including dehydration up to at least 150 degrees C.     

Time-resolved small angle X-ray scattering study of sol-gel precursor solutions of lead zirconate titanate and zirconia

The evolution of nanostructure in sol-gel derived lead zirconate titanate (PZT) and zirconia precursor sols at different hydrolysis ratios was investigated by small angle X-ray scattering (SAXS). The shape of the clusters in the zirconia sol could be described by the length-polydisperse cylindrical form factor. The zirconia-based clusters were characterized by a cross-sectional radius, r(0), of 0.28 nm and a practically monodisperse length of ca. 1.85 nm. These clusters were probably constructed of zirconia-related tetrameric building blocks. Similar cylindrical structural motifs were observed in PZT precursor sols with [H(2)O]/[Zr+Ti]=9.26 and 27.6, but the polydispersity in length was much higher. Clear scattering contributions from Ti and Pb centers were not detected, which was interpreted in terms of a homogeneous distribution of unbound lead ions in solution and the relatively low scattering intensity from any Ti-based clusters or oligomers that may have been present in the sols.     

Structural studies of water in hydrophilic and hydrophobic mesoporous silicas: an x-ray and neutron diffraction study at 297 K

Water confined in a sol-gel network has been characterized by x-ray and neutron diffraction for two samples of mesoporous silica: one with a hydrophilic character (a nonmodified one) and another with a hydrophobic character (a modified one with a methylated internal pore surface). The pore size has been previously characterized [J. Jelassi et al., Phys. Chem. Chem. Phys. 134, 1039 (2010)] to have a mean pore diameter of approximately 55 A?. The diffraction measurements presented in this paper have been made at room temperature [293 K] for a filling factor of 0.45, giving a mean thickness of 8-9 A? for the water layer. The results show that the local order of the confined water molecules in the intermediate region of 3-6 A? is significantly different from that of the bulk water and also for the two different environments. For the hydrophilic sample, the siloxyl groups at the surface modify the water structure through the effects of interfacial hydrogen-bonding, which influences the orientational configuration of local water molecules and creates a modified spatial arrangement in the pore. In the case of the hydrophobic sample, there is no specific interaction with the pore wall, which is primarily van der Waals type, and the water molecules at the interface are differently oriented to create a hydrogen-bonded network linked more directly to the rest of the water volume. In the present circumstances, the thickness of the water layer has a relatively small dimension so that the interpretation of the measured diffraction pattern is not as straightforward as for the bulk liquids, and it is necessary to consider the effects of diffraction-broadening from a distributed sample volume and also the contribution from cross-terms that remain after conducting a "wet-minus-dry" analysis procedure. These analytic difficulties are discussed in the context of the present measurements and compared with the work of other groups engaged in the study of water confined in different environments. The present results, again, emphasize the complexity influencing the properties of water in a confined geometry and the strong influence of surface interactions on its behavior.     

Development of nanoscale inhomogeneities during drying of sol-gel derived amorphous lead zirconate titanate precursor thin films

The structural evolution of sol-gel derived lead zirconate titanate (PZT) precursor films during and after physical drying was investigated by transmission electron microscopy (TEM), electron energy loss spectroscopy (EELS), selected area electron diffraction (SAED), and time-resolved X-ray diffraction (XRD). Films were deposited from initial 0.3 mol/dm(3) precursor sols with varying hydrolysis ratios. Zr-rich grains of 1-10 nm size, embedded in a Pb-, Zr-, and Ti-containing amorphous matrix were found in as-dried films. The Zr-rich regions were crystalline at hydrolysis ratios [H(2)O]/[PZT] < 27.6, and amorphous at ratios > 100. X-ray diffraction analysis of PZT and zirconia sols revealed that the crystalline nanoparticles in both sols are identical and are probably composed of nanosized zirconium oxoacetate-like clusters. This study demonstrates that time-resolved X-ray diffraction combined with electron energy loss spectroscopy mapping is a powerful tool to monitor the nanoscale structural evolution of sol-gel derived thin films.     

Structure of hybrid organic–inorganic sols for the preparation of hydrothermally stable membranes

A procedure for the preparation of hybrid sols for the synthesis of organic–inorganic microporous materials and thin film membranes is reported. We describe silane reactivity and sol structure for acid-catalysed colloidal sols from mixtures of either tetraethylorthosilicate (TEOS) and methyltriethoxysilane (MTES), or bis(triethoxysilyl)ethane (BTESE) and MTES. Early-stage hydrolysis and condensation rates of the individual silane precursors were followed with ²⁹Si liquid NMR and structural characteristics of more developed sols were studied with Dynamic Light Scattering. Condensation was found to proceed at more or less similar rates for the different precursors. Homogeneously mixed hybrid colloids can therefore be formed from precursor mixtures. The conditions of preparation under which clear sols with low viscosity could be formed from BTESE/MTES were determined. These sols were synthesised at moderate water/silane and acid/silane ratios and could be applied for the coating of defect-free microporous membranes for molecular separations under hydrothermal conditions.     

HL—1M装置1998年物理实验进展报告

报道了ＨＬ－１Ｍ装置１９９８年度物理实验的进展情况。主要包括等离子体密度极限,中性束注入加热,离子回旋共振加热,低温杂波离子加热,多发弹丸注入,超声分子束注入等实验的情况。     

Astrophysical S-factors from asymptotic normalization coefficients

S-factors for direct capture reactions can be found at astrophysical energies from asymptotic normalization coefficients which provide the normalization of the tail of the overlap function. For example the overlap for ⁸B → ⁷Be+p defines the S-factor for ⁷Be (p, γ)⁸B. Peripheral transfer reactions offer a technique to determine these asymptotic normalization coefficients. As a test of the technique, the ¹⁶O(³He, d)¹⁷F reaction has been used to determine asymptotic normalization coefficients for transitions to the ground and first excited states of ¹⁷F. The S-factors for ¹⁶O(p, γ)¹⁷F calculated from these ¹⁷F → ¹⁶O+p asymptotic normalization coefficients are found to be in very good agreement with recent measurements. Following the same technique, the ¹⁰B(⁷Be, ⁸B)⁹Be and ¹⁴N(⁷Be, ⁸B)¹³C reactions have been used to measure the asymptotic normalization coefficient for ⁷Be(p, γ)⁸B. This result provides an indirect determination of S ₁₇(0).     

Quick assessment methodology for reliability of solder joints in ball grid array (BGA) assembly—Part II: Reliability experiment and numerical simulation

In the present study, a facility, i.e., a mechanical deflection system (MDS), was established and applied to assess the long-term reliability of the solder joints in plastic ball grid array (BGA) assembly. It was found that the MDS not only quickly assesses the long-term reliability of solder joints within days, but can also mimic similar failure mechanisms in accelerated thermal cycling (ATC) tests. Based on the MDS and ATC reliability experiments, the acceleration factors (AF) were obtained for different reliability testing conditions. Furthermore, by using the creep constitutive relation and fatigue life model developed in part I, a numerical approach was established for the purpose of virtual life prediction of solder joints. The simulation results were found to be in good agreement with the test results from the MDS. As a result, a new reliability assessment methodology was established as an alternative to ATC for the evaluation of long-term reliability of plastic BGA assembly. The project supported by the National Natural Science Foundation of China (59705008)