Selective conversion of light gasoline into aromatic hydrocarbons over shape selective zeolites, I. Catalytic activity of various zeolites for aromatization of light gasoline, heavy gasoline and coker naphtha

Studies about the development of a new effective aromatization process for converting gasoline rich in light saturated hydrocarbons, using modified molecular shapeselective zeolites, have been carried out. Naphthas with olefins and naphthenes are potential feedstocks. The yield of aromatic hydrocarbons increases with decreasing hydrogen content of the feed. Zn-SABO and Zn-ZSM type zeolites have been shown to be excellent catalysts for the process.     

13-Hydroxyacenaphato[1,2-b]quinolizinium bromide as a new flouorescence indicator

13-Hydroxyacenaphtho[1,2-b]quinolizinium bromide (13-HQBr)was selected as a fluorescence indicator to determine basic compounds in non-aqueous media. This compound possesses an acidic phenolic hydroxyl group. It presents varying absorption (ROH, 408, 430 nm; RO(-) 456, 478 nm) and excitation spectra (ROH, 425 nm; RO, 471 nm) depending on the pH of the media, but the same emission fluorescence spectrum (ROH = RO(-), 526 nm) at different pH in buffered aqueous solutions. However, in acidic non-aqueous media (acetic, formic and trifluoroacetic acids), it can be observed that the fluorescence emission spectra differ for the ionized (lambda(em) = 530 nm) and non-ionized (lambda(em) = 440, 470 nm) forms. The fluorescence intensity at the characteristic peaks depends on the acid-base equilibria in the ground and excited states. Therefore, this property could be used to evaluate the concentration of basic compounds, showing a good linearity range between fluorescence intensity and basic sample concentration.     

Recent Advances in Electropolymerized Conducting Polymers in Amperometric Biosensors

Conducting electroactive polymers (CPs) are materials discovered just over 20 years ago which have aroused considerable interest on account of their electronic conducting properties and unique chemical and biochemical properties. Consequently, they have numerous (bio)analytical and technological applications. CPs are easily synthesized and deposited onto the conductive surface of a given substrate from monomer solutions by electrochemical polymerization with precise electrochemical control of their formation rate and thickness. Coating electrodes with CPs under mild conditions opens up enormous possibilities for the immobilization of biomolecules and bioaffinity or biorecognizing reagents, the improvement of their electrocatalytic properties, rapid electron transfer and direct communication to produce a range of analytical signals and new analytical applications. Co-immobilization of other molecules (enzymatic co-factors or charge-transfer mediators) by entrapment within electropolymerized films or by covalent binding on these films permits straightforward fabrication of reagentless biosensors. The characteristics of CPs and their uses, mainly in amperometric biosensors, are reviewed. The most recent applications and lines of research related to CP films are summarized in the different sections of the paper, and probable future trends are discussed.     

Reagentless system for sulphite determination based on polyaniline

A new reagentless system for sulphite (or sulphur dioxide) determination is reported based on the use of an organic conducting polymer, polyaniline, and its absorbance variation at 550 nm, depending on the sulphite concentration. After chemical polymerisation of aniline a very thin film of polyaniline is obtained. Although the response is not fully reversible, each film can be used for at least 10 measurements for low analyte concentrations (up to 0.5 mg l⁻¹) and five measurements for higher sulphite concentrations. Moreover, the reproducibility, ease of preparation and low cost of the films, permit the use of a new disposable system for each measurement. When the change in absorbance at 550 nm was measured for 210 s (stabilisation time), the system showed a linear response, which ranged from 0.025 to 1.50 mg l⁻¹ of sulphite. A theory with regard to the reaction mechanism between the polyaniline films and sulphite is also proposed. The system was applied to sulphite determination in wine samples and the results were in agreement with those obtained by the Official Method of Analysis (iodometric titration).     

A preliminary observation of additive thermodynamic contribution of pendant arms to the complexation of calixarene derivatives with mercury(II)

An additive thermodynamic contribution of pendant arms to the complexation of calixarene derivatives with mercury(II) in acetonitrile is for the first time demonstrated.     

CAROTENE and CYTOCHROME C DEPENDENT SURVIVAL KINETICS IN RESPONSE TO HIGH INTENSITY VISIBLE LIGHT IN THE SMUT FUNGUS Ustilago violacea

Abstract— Exposure of variously pigmented strains of Ustilago violacea to high intensity incandescent radiation resulted in the generation of three types of survival curves. High carotene, low cytochrome c containing strains of U. violacea were generally characterized by linear type I survival curves with slopes approximately equal to zero. Strains which lacked carotenes were characterized by exponential decay type II survival curves. A third survival curve, type III was observed with carotene accumulating strains which also contained large amounts of cytochrome c. The type III curves are characterized by an initial loss of viability, similar to the type II curves, followed by a recovery period, with eventual stability in survival. The survival curve type appears to be dependent on the relative mg quantities of cytochrome c and carotenes in the cells. Strains with carotene/cytochromec ratios of0–1 × 10^-1,3–15× 10^-1 and l6 × 10^-1 and above had type II, type III and type I survival curves, respectively.     

OXYGEN-DEPENDENT PHOTOSENSITIVITY and MITOTIC RECOMBINATION IN THE SMUT FUNGUS Ustilago violacea

Abstract— The effect of high intensity incandescent radiation on survival and mitotic recombination in the phlph + diploid strain of Ustilago violacea was studied with and without atmospheric O₂. In the presence of atmospheric O₂, strain phlph+ was characterized by photokilling to approximately 50% survival, and induction of mitotic recombination to about 60% by 90 min of light exposure. No photokilling and little induction of mitotic recombination were observed when light exposure was carried out in an 0₂ depleted environment. Photokilling and photo-induced mitotic recombination in U. violacea may be due to DNA damage or repair in response to a photosensitized reaction, involving an endogeneous photosensitizer.     

New In-situ Sampling and Analysis of the Production of CeO<Subscript>2</Subscript> Powders from Liquid Precursors using a Novel Wet Collection System in a rf Inductively Coupled Thermal Plasma Reactor. Part 1: Reactor System and Sampling Probe

A new reactor and a novel in-situ sampling technique were developed for the study of the synthesis of CeO₂ powders produced from dissolved cerium nitrate salts. The conical reactor minimized particle recirculation and provided a highly symmetrical and undisturbed plasma flow suitable for the analysis of the phenomena affecting the formation of CeO₂ powders. Both a calorimetric study of the reactor and a thermodynamic analysis of CeO₂ formation were conducted. The sampling probe is described and near-isokinetic sampling was achieved. The sampled particles were collected using a miniature wet collection system, i.e. a mist atomizer and a custom-made spray chamber. A numerical simulation of the velocity and temperature fields of the plasma gas in the reactor was done using Fluent. A comprehensive droplet-to-particle formation mechanism presented elsewhere is revisited and expanded based on calorimetry, thermodynamics of CeO₂ formation, numerical simulations and collected particles. No traces of other oxidation states other than CeO₂ were found.     

Crystal structures and voltammetric behavior of three copper(II) complexes derived from bulky Schiff bases

Three Schiff base copper(II) complexes have been prepared and characterized by elemental analysis, mass spectra, i.r., electronic spectra, _eff and X-ray crystal structures. Cyclic voltammetry studies on the complexes indicate a dependence of the cathodic potentials upon electronic effects, but independence on the solid state structure.     

Thermal and FTIR spectroscopic analysis of the interactions of aniline adsorbed on to MCM-41 mesoporous material

The adsorption of aniline on Na-AlMCM-41 synthesized by us has been characterized by infrared spectroscopy, temperature programmed desorption (TPD), and differential thermal analysis methods. Aniline would be mostly bound to the mesostructure through weak pi interactions. On the mesostructure containing adsorbed water, the co-adsorption of aniline could occur by weak hydrogen bonding through surface water molecules. For water, two possible modes of adsorption have been identified. Different associations between aniline and hydrated and nonhydrated mesostructures have been evaluated in order to favor the posterior in situ polymerization of adsorbed aniline.