Neodymium based fluorescence presents several advantages in comparison to conventional rare earth or enzyme-substrate based fluorescence emitting sources (e.g.Tb, HRP) . Based on this fact we have herein explored a Nd-based fluoroimmunoassay. We efficiently detected the presence of an oxidized low-density lipoprotein (oxLDL) in human plasma a well-known marker for cardiovascular diseases, which causes around 30% of deaths worldwide. Conventional fluoroimmunoassay uses time-resolved luminescence techniques, with detection in the visible range, to eliminate the fluorescence background from the biological specimens. By using an immunoassay based on functionalized Y2O3:Nd3+ nanoparticles, where the excitation and emission processes in the Nd3+ ion occur in the near-infrared (NIR) region, we have succeeded in eliminating the interferences from the biological fluorescence background, avoiding the use of time-resolved techniques. This yields higher emission intensity from the Nd3+-nanolabels and efficient detection of anti-oxidized low-density lipoproteins (anti-oxLDL) by Y2O3:Nd3+-antibody-antigen conjugation, leading to a novel biolabeling method. 相似文献
Abstract The binding of pyrenesulfonic acid and pyrenebutyric acid to poly(vinyl benzyl trimethylammonium) chloride was investigated by UV and fluorescence spectroscopy. It was found that the binding constant was 7.5 × 104 and 3.5 × 104M?1, respectively. The addition of the polyelectrolyte quenches the fluorescence of the pyrene group, and at the same time the typical excimer emission appears. This emission originates in pre-formed ground state aggregates of the pyrene derivatives incorporated into the polyion domain. Similar effects were observed when anionic polyelectrolytes, poly(styrene sulfonic), and poly(vinyl sulfonic) acids were added to cationic pyrene derivatives. The binding constants depend on the length of the aliphatic sidechain of the derivatives. 相似文献
A substantial portion of the atmospheric particle budget is of biological origin (human and animal dander, plant and insect debris, etc.). These bioaerosols can be considered information-rich packets of biochemical data specific to the organism of origin. In this study, bioaerosol samples from various indoor environments were analyzed to create identifiable patterns attributable to a source level of occupation. Air samples were collected from environments representative of human high-traffic- and low-traffic indoor spaces along with direct human skin sampling. In all settings, total suspended particulate matter was collected and the total aerosol protein concentration ranged from 0.03 to 1.2 μg/m3. High performance liquid chromatography was chosen as a standard analysis technique for the examination of aqueous aerosol extracts to distinguish signatures of occupation compared to environmental background. The results of this study suggest that bioaerosol “fingerprinting” is possible with the two test environments being distinguishable at a 97 % confidence interval.
Figure
Generalized schematic of human debris-based occupation detection. The various human occupation-related aerosolized material are collected via the filtration assembly along with other non-related aerosolized material. The collected material was then analyzed for total protein concentration as well as coarsely separated to generated unique pattern profiles. These profiles are information-rich enough to identify human occupation in an indoor space 相似文献
In dibenzylammonium hydrogen maleate [or dibenzylammonium (2Z)‐3‐carboxyprop‐2‐enoate], C14H16N+·C4H3O4−, (I), the anion contains a fairly short and nearly linear O—H...O hydrogen bond, with an O...·O distance of 2.4603 (16) Å, but with the H atom clearly offset from the mid‐point of the O...O vector. The counter‐ions in (I) are linked by two N—H...O hydrogen bonds to form C22(6) chains and these chains are weakly linked into sheets by a C—H...O hydrogen bond. Bis(dibenzylamino)methane, C29H30N2, (II), crystallizes with two independent molecules lying across twofold rotation axes in the space group C2/c, and the molecules are conformationally chiral; there are no direction‐specific intermolecular interactions in the crystal structure of (II). 相似文献
In the molecule of 4‐(2‐chlorophenyl)pyrrolo[1,2‐a]quinoxaline, C17H11ClN2, (I), the bond lengths are consistent with electron delocalization in the two outer rings of the fused tricyclic system, with a localized double bond in the central ring. The molecules of (I) are linked into chains by a π–π stacking interaction. In (4RS)‐4‐(1,3‐benzodioxol‐6‐yl)‐4,5‐dihydropyrrolo[1,2‐a]quinoxaline, C18H14N2O2, (II), the central ring of the fused tricyclic system adopts a conformation intermediate between screw‐boat and half‐chair forms. A combination of N—H...O and C—H...π(arene) hydrogen bonds links the molecules of (II) into a sheet. Comparisons are made with related compounds. 相似文献
This work presents a comparison between three analytical methods developed for the simultaneous determination of eight quinolones regulated by the European Union (marbofloxacin, ciprofloxacin, danofloxacin, enrofloxacin, difloxacin, sarafloxacin, oxolinic acid and flumequine) in pig muscle, using liquid chromatography with fluorescence detection (LC–FD), liquid chromatography–mass spectrometry (LC–MS) and liquid chromatography-tandem mass spectrometry (LC–MS/MS). The procedures involve an extraction of the quinolones from the tissues, a step for clean–up and preconcentration of the analytes by solid-phase extraction and a subsequent liquid chromatographic analysis. The limits of detection of the methods ranged from 0.1 to 2.1 ng g−1 using LC–FD, from 0.3 to 1.8 using LC–MS and from 0.2 to 0.3 using LC–MS/MS, while inter- and intra-day variability was under 15 % in all cases. Most of those data are notably lower than the maximum residue limits established by the European Union for quinolones in pig tissues. The methods have been applied for the determination of quinolones in six different commercial pig muscle samples purchased in different supermarkets located in the city of Granada (south-east Spain).
A simple and efficient procedure for the synthesis of a new class of organoselenium liquid crystal compounds was developed. The coupling of aryl bromides with elemental selenium was catalysed using copper oxide nanopowder in the presence of potassium hydroxide employing dimethyl sulfoxide as the solvent. This is the first report of the synthesis and characterisation of liquid crystal-based diselenides. Their mesophases were characterised by polarising optical microscopy and differential scanning calorimetry. Compounds 1, 2 and 4b exhibited the smectic A phase. In addition, these compounds showed weak blue fluorescence in solution (λmax.em. 350–405 nm) and a Stokes shift of around 90 nm. 相似文献
Synthetic ditopic receptors, designed for the molecular recognition of dimannosides, have been prepared by bridging two monotopic units effectively recognizing mannosides with linkers of the appropriate size and flexibility, endowed with hydrogen‐bonding groups. Affinities toward the α and β glycosides of the biologically relevant Manα(1–2)Man disaccharide were measured by NMR spectroscopy and isothermal titration calorimetry (ITC) in polar organic media (30–40 % DMF in chloroform). Significant selectivities and affinities in the micromolar range were observed in most cases, with two newly designed receptors being the most effective receptors of the set, together with a distinct preference of the dimannosides for the (S) enantiomer of the receptor in all cases. A 3D view of the recognition mode was elucidated by a combined NMR spectroscopic/molecular modeling approach, showing the dimannoside included in the cleft of the receptor. Compared to the monotopic precursors, the ditopic receptors showed markedly improved recognition properties, proving the efficacy of the modular receptor design for the recognition of disaccharides. 相似文献
A series of twelve novel 1-acetamide-5-methoxy-2-oxindoles were prepared in moderate to good yields (30–88%) by an Ugi-SN2 one pot process with a xanthate mediated free radical cyclization. Additionally, Density Functional Theory (DFT) based calculations were performed at UB3LYP/6-311G(d) level in order to rationalize the energy profile of the xanthate mediated free radical cyclization because the benzo-fused γ-lactams (ortho products) were obtained as sole regioisomers over the spiro β-lactams (ipso products). 相似文献
Public concern about pesticides in food and water has increased dramatically in the last two decades. In order to guarantee consumers’ health and safety, analytical methods that could provide fast and reliable answers without compromising accuracy and precision are required. Sample treatment is probably the most tedious and time‐consuming step in many analytical procedures and, despite the significant advances in chromatographic separations and mass spectrometry techniques, sample treatment is still one of the most important parts of the analytical process for achieving good analytical results. Therefore, over the last years, considerable efforts have been made to simplify the stage and to develop fast, accurate, and robust methods that allow the determination of a wide range of pesticides without compromising the integrity of the extraction process. This review article intends to give a short overview of recently developed on‐line solid‐phase extraction, preconcentration, and clean‐up procedures for the determination of pesticides in complex matrices by liquid chromatography–mass spectrometry techniques. 相似文献