pH和盐类对非离子型表面活性剂所组成微乳液的异常流变性影响

以非离子型表面活性剂AEO~9、正十六烷、正己醇和水所组成的微乳液为对象, 研究盐和pH值对其粘度和流变性的影响, 得出它们在pH值为7时最小, 以及二价盐影响最大的结论, 正好与离子型微乳液结果相反, 为此进行了讨论。并从热效应和电导对其微观结构作了初步探索。     

On the Mechanism Behind the Instability of Isoreticular Metal–Organic Frameworks (IRMOFs) in Humid Environments

Increasing the resistance to humid environments is mandatory for the implementation of isoreticular metal–organic frameworks (IRMOFs) in industry. To date, the causes behind the sensitivity of [Zn₄(μ₄‐O)(μ‐bdc)₃]₈ (IRMOF‐1; bdc=1,4‐benzenedicarboxylate) to water remain still open. A multiscale scheme that combines Monte Carlo simulations, density functional theory and first‐principles Born–Oppenheimer molecular dynamics on IRMOF‐1 was employed to unravel the underlying atomistic mechanism responsible for lattice disruption. At very low water contents, H₂O molecules are isolated in the lattice but provoke a dynamic opening of the terephthalic acid, and the lattice collapse occurs at about 6 % water weight at room temperature. The ability of Zn to form fivefold coordination spheres and the increasing basicity of water when forming clusters are responsible for the displacement of the organic linker. The present results pave the way for synthetic challenges with new target linkers that might provide more robust IRMOF structures.     

Effects of hydroxyvalerate contents in thermal degradation kinetic of cellulose acetate propionate/poly(3-hydroxyalkanoates) blends

Thermal stability of polymers is an important parameter that determines the application as well as the processing conditions. The green polymers have shown low thermal stability, such as the polyhydroxyalkanoates (PHAs). The PHAs with different comonomers containing hydroxyvalerate (HV) were studied. It was seen that the green polymer showed a fast thermal degradation process. The addition of the HV comonomer modified this profile and the thermal degradation kinetic. The blend prepared between the PHAs and other polymers can modify the thermal degradation process of the green polymers. In the present study, blends of cellulose acetate propionate and PHAs were prepared, and the thermal degradation kinetics of these blends were evaluated. It was observed that the cellulose acetate propionate (CAP) phase in the blends modified the thermal degradation process and kinetic profile of the PHA phase. In the blends, the thermal stability of the PHAs was slightly modified because of CAP reducing the reactivity of the PHAs. On the other hand, the thermal stability of the CAP phase in the blends is not largely modified by the PHA phase. However, the hydroxyvalerate comonomer decreases the reactivity of the CAP phase at the start of thermal degradation of the same. The interaction between the phases promotes the synergetic interaction, which slightly improves the thermal stability of the two polymers blends.     

Study of the lumiescence properties of a new series of quinolizinium salts and their interaction with DNA

The spectrofluorimetric characteristic of a new group of benzo- and methyl- quinolizinium salts at room temperature and 77 LK are reported. At room temperature, linear calibration is wide; 10^-9 M 9-cyanobenzo [a] phenathro [9,10-g] quinolizinium chloride can be detected in methanolic solution and 10^-7 M in aqueous solution. The polynuclear compounds show the most intense luminescence bands, and a significant hypsochromic shift of the fluorenscence emission maximum was observed at 77 K compared with room temperature. For the 2,3-diphenyl derivatives, the presence of a methoxy substituent produces a marked Stoke's shift, because it causes a decrease in the planarity of the molecule. The benzo compounds are similar in structure to the alkaloid coralyne, which has significant antileuikemic activity. The fused planar aromatic compounds are shown to bind with DNA.     

Syntheses,Structures, Reactivities,and Basicities of Quinolinyl and Isoquinolinyl Complexes of an Electron Rich Chiral Rhenium Fragment and Their Electrophilic Addition Products

Reactions of Li⁺ [(η⁵-C₅H₅)Re(NO)(PPh₃)]⁻ with 2- and 4-chloroquinoline or 1-chloroisoquinoline give the corresponding σ quinolinyl and isoquinolinyl complexes 3 , 6 , and 8 . With 3 and 8 there is further protonation to yield HCl adducts, but additions of KH give the free bases. Treatment of 3 with HBF₄⋅OEt₂ or H(OEt₂)₂⁺ BAr_f⁻ gives the quinolinium salts [(η⁵-C₅H₅)Re(NO)(PPh₃)(C(NH)C(CH)₄C (CH)(CH))]⁺ X⁻ ( 3-H ⁺ X⁻; X⁻=BF₄⁻/BAr_f⁻, 94–98 %). Addition of CF₃SO₃CH₃ to 3 , 6 , or 8 affords the corresponding N-methyl quinolinium salts. In the case of [(η⁵-C₅H₅)Re(NO)(PPh₃)(C(NCH₃)C(CH)₄C (CH)(CH))]⁺ CF₃SO₃⁻ ( 3-CH₃ ⁺ CF₃SO₃⁻), addition of CH₃Li gives the dihydroquinolinium complex (S_ReR_C,R_ReS_C)-[(η⁵-C₅H₅)Re(NO)(PPh₃)(C(NCH₃)C(CH)₄C (CHCH₃)(CH₂))]⁺ CF₃SO₃⁻ ((S_ReR_C,R_ReS_C)- 5 ⁺ CF₃SO₃⁻, 76 %) in diastereomerically pure form. Crystal structures of 3-H ⁺ BAr_f⁻, 3-CH₃ ⁺ CF₃SO₃⁻, (S_ReR_C, R_ReS_C)- 5 ⁺ Cl⁻, and 6-CH₃ ⁺ CF₃SO₃⁻ show that the quinolinium ligands adopt Re⋅⋅⋅ C conformations that maximize overlap of their acceptor orbitals with the rhenium fragment HOMO, minimize steric interactions with the bulky PPh₃ ligand, and promote various π interactions. NMR experiments establish the Brønsted basicity order 3 > 8 > 6 , with K_a(BH⁺) values >10 orders of magnitude greater than the parent heterocycles, although they remain less active nucleophilic catalysts in the reactions tested. DFT calculations provide additional insights regarding Re⋅⋅⋅ C bonding and conformations, basicities, and the stereochemistry of CH₃Li addition.     

Synthesis and evaluation of bis-β-diketonate dioxotungsten(VI) complexes as precursors for the photodeposition of WO3 films

In this paper non-stoichiometric tungsten oxide thin films have been successfully prepared by direct UV irradiation of bis-β-diketonate dioxotungsten(VI) precursor complexes spin-coated Si(1 0 0) substrates. Photodeposited films were characterized by Fourier transform-infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) and the surface morphology examined by Atomic Force Microscopy (AFM). The results of XRD analysis showed that the as-photodeposited WO_3−x films are amorphous and have a rougher surface than thermally treated films. Post-annealing of the films in air at 500 °C transforms the sub-oxides to a monoclinic WO₃ phase.     

An evaluation method for determination of non-polar pesticide residues in animal fat samples by using dispersive solid-phase extraction clean-up and GC-MS

A rapid and easy method has been proposed, optimized and evaluated for quantitative determination at trace level of a representative group of non-polar pesticides in fat samples. The method includes n-hexane-saturated acetonitrile extraction, fat precipitation by cooling pre clean-up followed by dispersive solid-phase extraction (d-SPE) based on QuEChERS procedure clean-up. Determination was performed by gas chromatography?Cmass spectrometry (GC-MS) in selected ion monitoring (SIM) mode. Efficiency of the d-SPE clean-up step was evaluated by comparison with fat oxidation treatment and gel permeation chromatography. Different combinations of d-SPE extraction reagents and sample amounts were tested in order to minimize matrix co-extractives and interferences. Best recoveries were obtained with 1200?mg of MgSO₄, 400?mg of end-capped C₁₈, 400?mg of PSA and 1?g of sample amount. SIM method, matrix effect, precision, and accuracy were evaluated with spiked pork fat samples for 38 representative pesticides. Results of this study showed that this technique is applicable in routine analysis for its application into monitoring programs. It simplifies time-consuming clean-up steps and allows a satisfactory long-term chromatographic performance.     

Silicon determination by inductively coupled plasma atomic emission spectrometry after generation of volatile silicon tetrafluoride

A method for the determination of silicon by inductively coupled plasma atomic emission spectrometry (ICP-AES) is described. The procedure is based on a discontinuous generation of volatile silicon tetrafluoride in concentrated sulphuric acid medium after injecting 125 μl of 0.1%, w/v sodium fluoride solution into 100 μl of the sample. The gaseous silicon tetrafluoride is fed directly into the ICP torch by a flow of 250 ml min⁻¹ Ar carrier gas. The calibration curve was linear up to at least 100 μg ml⁻¹ of Si(IV) and the absolute detection limit was 9.8 ng working with a solution volume of 100 μl. The relative standard deviation for six measurements of 10 μg ml⁻¹ of Si(IV) was 2.32%. The method was applied to the determination of silicon in water and iron ores.     

Inter-laboratory comparison of liquid chromatographic techniques and enzyme-linked immunosorbent assay for the determination of surfactants in wastewaters

Seven laboratories participated in an inter-laboratory comparison exercise within the framework of the PRISTINE, SANDRINE and INEXsPORT European Union Projects. Solid-phase extraction (SPE) methodologies were used for the extraction of target analytes from wastewaters. The analytical strategies were based on liquid chromatography (LC) coupled to mass spectrometric (MS) or to fluorescent (FL) detection in all cases with the exception of one laboratory using a test-tube enzyme-linked immunosorbent assay kit. Samples were spiked with the surfactants nonylphenolpolyglycol ether, coconut diethanolamide, linear alkylbenzene sulfonate, nonylphenolpolyglycol ether sulfate, alkylpolyglycol ether and secondary alkane sulfonate. After enrichment on previously conditioned SPE cartridges, the SPE cartridges were distributed among the participating laboratories without the information about the amount of spiked surfactants. In addition, SPE cartridges loaded with a real-world environmental sample containing a tannery wastewater were also analyzed. The results of the programme showed that SPE followed by LC-MS techniques are reliable for the surfactants determination at submicrogram to microgram per liter levels in wastewaters. Inter-laboratory precision values were calculated as the reproducibility relative standard deviation (RSD(R)) which was determined from the reproducibility standard deviation (sR) and the average concentration at a particular concentration level. When data from all laboratories were pooled, the RSD(R) values ranged from 5.1 to 28.3% for the determination of target analytes. The most accurate result corresponded to that given for linear alkylbenzene sulfonates. Taking into account that different methodologies were used (including non-chromatographic techniques) and the complexity of the samples analyzed, it can be considered that acceptable reproducibility values were obtained in this inter-laboratory study.     

Growth and characterization of molybdenum oxide thin films prepared by photochemical metal–organic deposition (PMOD)

Molybdenum oxide thin films have been successfully prepared by direct UV irradiation of amorphous films of a molybdenum dioxide acetylacetonate complex on Si(1 0 0) substrates. Photodeposited films were characterized by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) and the surface morphology examined by Atomic Force Microscopy (AFM). It was found that as-photodeposited films are uniform and smooth, with thickness of 350 nm, with rms surface roughness of 28 nm and contain non-stoichiometric oxides (MoO_3−x). The results of XRD analysis showed that post-annealing of the films in air at 450 °C transforms the sub-oxides to α-MoO₃ phase with a much rougher surface morphology (rms = 144 nm). The as-photodeposited MoO_3−x films are amorphous, and exhibit better optical quality than annealed films.