A numerical study of an unsteady laminar flow in a doubly constricted 3D vessel

Unsteady flow dynamics in doubly constricted 3D vessels have been investigated under pulsatile flow conditions for a full cycle of period T. The coupled non‐linear partial differential equations governing the mass and momentum of a viscous incompressible fluid has been numerically analyzed by a time accurate Finite Volume Scheme in an implicit Euler time marching setting. Roe's flux difference splitting of non‐linear terms and the pseudo‐compressibility technique employed in the current numerical scheme makes it robust both in space and time. Computational experiments are carried out to assess the influence of Reynolds' number and the spacing between two mild constrictions on the pressure drop across the constrictions. The study reveals that the pressure drop across a series of mild constrictions can get physiologically critical and is also found to be sensitive both to the spacing between the constrictions and the oscillatory nature of the inflow profile. The flow separation zone on the downstream constriction is seen to detach from the diverging wall of the constriction leading to vortex shedding with 3D features earlier than that on the wall in the spacing between the two constrictions. Copyright © 2002 John Wiley & Sons, Ltd.     

Connection machine simulation of ultrasonic wave propagation in materials III: The three-dimensional case

A formalism for the simulation by parallel processing of the propagation of ultrasonic pulses of arbitrary shape (i.e. not restricted to continuous waves) in complex media is presented. Recursive relationships yielding the time evolution of the displacement field are derived for both homogeneous and heterogeneous materials. In the latter case, formulas for cross-points at the intersection of up to eight different materials are obtained. A few examples of numerical results obtained with the proposed method are shown to demonstrate its applicability and efficiency. The problem of visualization of the results is also briefly discussed.     

A high-current electron beam ion trap as an on-line charge breeder for the high precision mass measurement TITAN experiment

The precision of atomic mass measurements in a Penning trap is directly proportional to the charge state q of the ion and, hence, can be increased by using highly charged ions (HCI). For this reason, charge breeding with an electron beam ion trap (EBIT) is employed at TRIUMF’s Ion Trap for Atomic and Nuclear science (TITAN) on-line facility in Vancouver, Canada. By bombarding the injected and trapped singly charged ions with an intense beam of electrons, the charge state of the ions is rapidly increased inside the EBIT. To be compatible with the on-line requirements of short-lived isotopes, very high electron beam current densities are needed. The TITAN EBIT includes a 6 Tesla superconducting magnet and is designed to have electron beam currents and energies of up to 5 A and 60 keV, respectively. Once operational at full capacity, most species can be bred into a He-like configuration within tens of ms. Subsequently, the HCI are extracted, pass a Wien filter to reduce isobaric contamination, are cooled, and injected into a precision Penning trap for mass measurement. We will present the first results and current status of the TITAN EBIT, which has recently been moved to TRIUMF after assembly and commissioning at the Max-Planck-Institute (MPI) for Nuclear Physics in Heidelberg, Germany.     

Mössbauer studies on some new magnetic oxides

Three new magnetic oxides have been synthesised, viz., Li₂Fe₃VO₈, YFe₃TiO₈ and CaFe₃VO₈. XRD studies show that the first compound has a cubic symmetry of spinel type while the latter two show orthorhombic symmetry. All the three compounds are magnetic at room temperature, however, the first compound shows a large magnetic moment as compared to the other two. Their Mössbauer spectra at room temperature show distinct hyperfine split spectral lines. The present preliminary investigation indicates that the long range order is ferrimagnetic in Li₂Fe₃VO₈ and CaFe₃VO₈ while in YFe₃TiO₈ it is more likely to be canted antiferromagnetic.     

On the univalence of derivatives of functions which are univalent in angular domains

We consider functions f that are univalent in a plane angular domain of angle απ, 0 < α ≤ 2. It is proved that there exists a natural number k depending only on α such that the kth derivatives f ^(k) of these functions cannot be univalent in this angle. We find the least of the possible values of for k. As a consequence, we obtain an answer to the question posed by Kir’yatskii: if f is univalent in the half-plane, then its fourth derivative cannot be univalent in this half-plane.     

The magnetic properties of Be-codoped GaMnN grown via molecular beam epitaxy

GaMnN and Be-codoped GaMnN were grown via molecular beam epitaxy using a single GaN precursor and their structural and magnetic properties were examined. X-ray diffraction and superconducting quantum interference device (SQUID) measurements revealed that the grown layers are homogeneous without precipitates. The saturation magnetization of GaMnN has increased from ∼4 to ∼16 emu/cm³ via codoping of Be. The d–d exchange interaction between Mn atoms was discussed for the ferromagnetism of GaMnN.     

Towards a fully optimised organic LED device: Analysis of surface synthesis using coupling reactions by ToF-SIMS

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and polarisation-modulation reflection-absorption infrared spectroscopy (PM-RAIRS) have been used to monitor the surface synthesis of self-assembled aromatic π-conjugated molecular wires on gold substrates as a step towards a novel structure for organic electroluminescent devices (OLEDs). The wires have been synthesised using a series of Schiff's base coupling reactions in solution on a self-assembled monolayer of an aromatic thiolate anchor. ToF-SIMS and PM-RAIRS measurements have demonstrated that: (i) the anchor molecules self-assemble at the gold surface, (ii) the anchor molecules selectively react through imino coupling reactions with additional wire units with high efficiency and (iii) the wire-like structure is predominantly orientated normal to the surface.     

Modeling of environmentally significant interfaces: Two case studies

When some parameters cannot be easily measured experimentally, mathematical models can often be used to deconvolute or interpret data collected on complex systems, such as those characteristic of many environmental problems. These models can help quantify the contributions of various physical or chemical phenomena that contribute to the overall behavior, thereby enabling the scientist to control and manipulate these phenomena, and thus to optimize the performance of the material or device. In the first case study presented here, a model is used to test the hypothesis that oxygen interactions with hydrogen on the catalyst particles of solid oxide fuel cell anodes can sometimes occur a finite distance away from the triple phase boundary (TPB), so that such reactions are not restricted to the TPB as normally assumed. The model may help explain a discrepancy between the observed structure of SOFCs and their performance. The second case study develops a simple physical model that allows engineers to design and control the sizes and shapes of mesopores in silica thin films. Such pore design can be useful for enhancing the selectivity and reactivity of environmental sensors and catalysts. This paper demonstrates the mutually beneficial interactions between experiment and modeling in the solution of a wide range of problems.     

Low-frequency noise and inelastic tunneling spectroscopy in Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) epitaxial magnetic tunnel junctions

We report on tunnelling magnetoresistance (TMR), current–voltage (IV) characteristics and low-frequency noise in epitaxially grown Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) magnetic tunnel junctions (MTJs) with dimensions from 2×2 to 20×20 μm². The evaluated MgO energy barrier (0.50±0.08 eV), the barrier width (13.1±0.5 Å) as well as the resistance times area product (7±1 MΩ μm²) show relatively small variation, confirming a high quality epitaxy and uniformity of all MTJs studied. At low temperatures (T<10 K) inelastic electron tunneling spectroscopy (IETS) shows anomalies related to phonons (symmetric structures below 100 meV) and asymmetric features above 200 meV. We explain the asymmetric features in IETS as due to generation of electron standing waves in one of the Fe electrodes. The noise power, though exhibiting a large variation, was observed to be roughly anti-correlated with the TMR. Surprisingly, for the largest junctions we observed a strong enhancement of the normalized low-frequency noise in the antiparallel magnetic configuration. This behavior could be related to the influence of magnetostriction on the characteristics of the insulating barrier through changes in local barrier defects structure.     

Approximations of relations by continuous functions

Let X be a Tychonoff space, C(X) be the space of all continuous real-valued functions defined on X and CL(X×R) be the hyperspace of all nonempty closed subsets of X×R. We prove the following result. Let X be a countably paracompact normal space. The following are equivalent: (a) dimX=0; (b) the closure of C(X) in CL(X×R) with the Vietoris topology consists of all F∈CL(X×R) such that F(x)≠∅ for every x∈X and F maps isolated points into singletons; (c) each usco map which maps isolated points into singletons can be approximated by continuous functions in CL(X×R) with the locally finite topology. From the mentioned result we can also obtain the answer to Problem 5.5 in [L'. Holá, R.A. McCoy, Relations approximated by continuous functions, Proc. Amer. Math. Soc. 133 (2005) 2173-2182] and to Question 5.5 in [R.A. McCoy, Comparison of hyperspace and function space topologies, Quad. Mat. 3 (1998) 243-258] in the realm of normal, countably paracompact, strongly zero-dimensional spaces. Generalizations of some results from [L'. Holá, R.A. McCoy, Relations approximated by continuous functions, Proc. Amer. Math. Soc. 133 (2005) 2173-2182] are also given.