Epoxy phosphonate crosslinkers for providing flame resistance to cotton textiles

Two new monomers (2‐methyl‐oxiranylmethyl)‐phosphonic acid dimethyl ester ( 3 ) and [2‐(dimethoxy‐phosphorylmethyl)‐oxyranylmethyl]‐phosphonic acid dimethyl ester ( 6 ) were prepared and used with dicyandiamide ( 7 ) and citric acid ( 8 ) to impart flame resistance to cotton plain weave, twill, and 80:20‐cotton/polyester fleece fabrics. Monomers 3 and 6 were prepared from methallyl chloride ( 1 ) and 3‐chloro‐2‐chloromethylpropene ( 4 ) respectively via a two‐step phosphorylation epoxidation sequence in 79.3 and 67.5% overall yields. ¹H and ¹³C nuclear magnetic resonance (NMR) and gas chromatographic mass spectrometry (GCMS) data were used to confirm their structures. Decomposition of monomers 3 and 6 in nitrogen by thermogravimetric analysis (TGA) occurred at 110 and 220°C, respectively. The mixtures of 3 : 7 : 8 and 6 : 7 : 8 (in 2:1:1 ratio) exhibited peak‐curing temperatures by differential scanning calorimeter (DSC) at 125 and 150°C and the temperatures were deemed suitable for curing treated fabrics without marring them. Flame‐retardant treatments were applied by the pad‐dry‐cure methods. All untreated fabrics showed limiting oxygen index (LOI) values of about 18% oxygen in nitrogen. For formulations with monomer 3 , LOI values for the three types of treated fabrics were greater than 25.5% when add‐on values for the formulation were 17.4, 12.7, and 21.1%. For formulations comprising monomer 6 , LOI values were greater than 28.6% when add‐on values for the formulation were 18.3, 13.1, and 16.7%. With the formulation comprising monomer 3 , the three fabrics passed the vertical flame test when add‐on values were 21.6, 12.7, and 23.5%, respectively; and with the formulation comprising monomer 6 , they passed the vertical flame test when add‐on values were 13.8, 8.4, and 18.0%. In all cases char lengths of fabrics that passed the vertical flame test were less than 50% of original length and after‐flame time was 0 sec and after‐glow time was less than 2 sec. Published in 2007 by John Wiley & Sons, Ltd.     

Mechanical mapping and morphology across the length scales unveil structure–property relationships in polycaprolactone based polyurethanes

Segmented polyurethane elastomers for biomedical applications were synthesized and studied at macroscopic (by mechanical testing) and meso/nanoscopic length scales (by atomic force microscopy, AFM). The polyurethanes are composed of 4,4'‐methylenebis(phenyl isocyanate), 1,4‐butanediol and an ε‐polycaprolactone diol. The stoichiometric ratio of the isocyanate and hydroxyl groups is constant, but the polymer diol to total diol—varies from 0 to 100 %. We show the representative features of the morphology from phase separation to mixed phases, how this is related to the mechanical properties in the bulk and locally, at exposed free surfaces and at the nanoscale. We propose a morphological model considering the molecular structure, the length of hard segments, and the dimensions of both the soft and the hard phases, respectively. Understanding such structure–property relations is pivotal to establishing designer materials and controlling the performance of the final product to achieve optimal properties in polyurethane based medical devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2298–2310.     

Sensing Enzymatic Activity by Exposure and Selection of DNA‐Encoded Probes

A sensing approach is applied to encode quantitative enzymatic activity information into DNA sequence populations. The method utilizes DNA‐linked peptide substrates as activity probes. Signal detection involves chemical manipulation of a probe population downstream of sample exposure and application of purifying, selective pressure for enzyme products. Selection‐induced changes in DNA abundance indicate sample activity. The detection of protein kinase, protease, and farnesyltransferase activities is demonstrated. The assays were employed to measure enzyme inhibition by small molecules and activity in cell lysates using parallel DNA sequencing or quantitative PCR. This strategy will allow the extensive infrastructure for genetic analysis to be applied to proteomic assays, which has a number of advantages in throughput, sensitivity, and sample multiplexing.     

Yolk-Shell Nanocrystal@ZIF-8 Nanostructures for Gas-Phase Heterogeneous Catalysis with Selectivity Control

A general synthetic strategy for yolk-shell nanocrystal@ZIF-8 nanostructures has been developed. The yolk-shell nanostructures possess the functions of nanoparticle cores, microporous shells, and a cavity in between, which offer great potential in heterogeneous catalysis. The synthetic strategy involved first coating the nanocrystal cores with a layer of Cu(2)O as the sacrificial template and then a layer of polycrystalline ZIF-8. The clean Cu(2)O surface assists in the formation of the ZIF-8 coating layer and is etched off spontaneously and simultaneously during this process. The yolk-shell nanostructures were characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and nitrogen adsorption. To study the catalytic behavior, hydrogenations of ethylene, cyclohexene, and cyclooctene as model reactions were carried out over the Pd@ZIF-8 catalysts. The microporous ZIF-8 shell provides excellent molecular-size selectivity. The results show high activity for the ethylene and cyclohexene hydrogenations but not in the cyclooctene hydrogenation. Different activation energies for cyclohexene hydrogenation were obtained for nanostructures with and without the cavity in between the core and the shell. This demonstrates the importance of controlling the cavity because of its influence on the catalysis.     

Partial enzymatic elimination and quantification of sarcosine from alanine using liquid chromatography–tandem mass spectrometry

Since sarcosine and d,l-alanine co-elute on reversed-phase high-performance liquid chromatography (HPLC) columns and the tandem mass spectrometer cannot differentiate them due to equivalent parent and fragment ions, derivatization is often required for analysis of sarcosine in LC/MS systems. This study offers an alternative to derivatization by employing partial elimination of sarcosine by enzymatic oxidation. The decrease in apparent concentration from the traditionally merged sarcosine–alanine peak associated with the enzymatic elimination has been shown to be proportional to the total sarcosine present (R ²?=?0.9999), allowing for determinations of urinary sarcosine. Sarcosine oxidase was shown to eliminate only sarcosine in the presence of d,l-alanine, and was consequently used as the selective enzyme. This newly developed technique has a method detection limit of 1 μg/L (parts per billion) with a linear range of 3 ppb–1 mg/L (parts per million) in urine matrices. The method was further validated through spiked recoveries of real urine samples, as well as the analysis of 35 real urine samples. The average recoveries for low, middle, and high sarcosine concentration spikes were 111.7, 90.8, and 90.1 %, respectively. In conclusion, this simple enzymatic approach coupled with HPLC/MS/MS is able to resolve sarcosine from d,l-alanine leading to underivatized quantification of sarcosine.

Biphenyl-based liquid crystals for elevated temperature processing with polymers

Due to the limited thermal stability of current commercially available liquid crystals (LCs), the incorporation into polymer composites through standard processing techniques, such as melt coextrusion, has been hindered. Motivated by this dilemma, a series of smectic B liquid crystalline structures based on the 4,4?-alkyl substituted biphenyl moiety were synthesised through conventional methodologies and probed for their thermal stability and LC properties. Degradation temperatures were found to increase with increasing aliphatic chain length – up to 295 °C for C16 substituted structures, which is well above the processing temperatures of commercial polymers. Additionally, all compounds were found to be liquid crystalline in nature with crystal-to-smectic B transition temperatures ranging from 49.8 °C to 91.4 °C. Thermal stability, phase separation, and compatibility of LC/polystyrene composites were also examined. Less than 10% of 15A15 LC by weight in polystyrene exhibited good polymer miscibility, while phase separation occurred at loads higher than 15% by weight. We foresee the use of these LCs in applications that require elevated processing conditions to produce materials with enhanced mechanical or gas barrier properties.     

Semi-empirically derived petrophysical and thermodynamical coefficients of permselective shales—Implications on ore mineralization

Phenomenological coefficients of shale–electrolyte systems may offer a glimpse into probable matrix-permeability and solute-exclusionary relationships. Shales from unexposed Upper Cretaceous Period Mancos Shale and from Permian Period Abo Formation were cut into thin wafers, placed in custom built osmometers and a chemical potential applied across them giving rise to induced osmotic flow. This in turn spawned matrix unique constants namely mechanical filtration coefficient L_P (m³ N⁻¹ s⁻¹), diffusional mobility per unit osmotic pressure L_PD (m³ N⁻¹ s⁻¹), osmotic flow coefficient; L_D (m³ N⁻¹ s⁻¹), reflection coefficient σ (dimensionless) at zero gradients of temperature and hydrostatic pressure. Considering intrinsic relationships between these constants where and L_PD = −σL_P, we have ascertained that the bentonitic fossiliferous Mancos shale had a lower L_P and a higher σ compared to the kaolinitic and siliceous shale from Abo Formation indicating a higher degree of compaction post-diagenesis (lower porosity) and higher filtration efficiency. Mechanistic processes involved in solute transport and matrix morphology indicate key multi-scale transformations, ionic- and atomic-exchange competitions on high energy sites like cation-exchange sites, isomorphic substitution at argillaceous mineral edges, atomic-clipping within basal spacing, preferential pathway migration, dead-end pores that give rise to localized solute exclusionary processes and solute attenuation giving rise to anomalous osmotic gradients.     

Modifying the charge state distribution of proteins in electrospray ionization mass spectrometry by chemical derivatization

Electrospray ionization (ESI) of denatured proteins produces a broad distribution of multiply-charged ions leading to multiple peaks in the mass spectrum. We investigated changes in the positive-mode ESI charge state distribution produced by several chemical modifications of denatured proteins. Capping carboxylic acid groups with neutral functional groups yields little change in charge state distribution compared with unmodified proteins. The results indicate that carboxyl groups do not play a significant role in the positive charging of denatured proteins in ESI. The modification of proteins with additional basic sites or fixed positive charges generates substantially higher charge states, providing evidence that the number of ionizable sites, rather than molecular size and shape, determines ESI charging for denatured proteins. Fixed charge modification also significantly reduces the number of protons acquired by a protein, in that the charge state envelope is not increased by the full number of fixed charges appended. This result demonstrates that Coulombic repulsion between positive charges plays a significant role in determining charge state distribution by affecting the gas-phase basicity of ionizable sites. Addition of fixed-charge moieties to a protein is a useful approach for shifting protein charge state distributions to higher charge states, and with further work, it may help limit the distribution of protein ions to fewer charge states.     

Exploiting parameter space in MOFs: a 20-fold enhancement of phosphate-ester hydrolysis with UiO-66-NH2

The hydrolysis of nerve agents is of primary concern due to the severe toxicity of these agents. Using a MOF-based catalyst (UiO-66), we have previously demonstrated that the hydrolysis can occur with relatively fast half-lives of 50 minutes. However, these rates are still prohibitively slow to be efficiently utilized for some practical applications (e.g., decontamination wipes used to clean exposed clothing/skin/vehicles). We thus turned our attention to derivatives of UiO-66 in order to probe the importance of functional groups on the hydrolysis rate. Three UiO-66 derivatives were explored; UiO-66-NO₂ and UiO-66-(OH)₂ showed little to no change in hydrolysis rate. However, UiO-66-NH₂ showed a 20 fold increase in hydrolysis rate over the parent UiO-66 MOF. Half-lives of 1 minute were observed with this MOF. In order to probe the role of the amino moiety, we turned our attention to UiO-67, UiO-67-NMe₂ and UiO-67-NH₂. In these MOFs, the amino moiety is in close proximity to the zirconium node. We observed that UiO-67-NH₂ is a faster catalyst than UiO-67 and UiO-67-NMe₂. We conclude that the role of the amino moiety is to act as a proton-transfer agent during the catalytic cycle and not to hydrogen bond or to form a phosphorane intermediate.     

A new aluminum hydroxide octamer, [Al8(OH)14(H2O)18](SO4)5 x 16H2O

A new aluminum hydroxide cluster with eight Al(III) ions linked together by a series of hydroxyl bridges as a sulfate salt has been synthesized from aqueous solution and characterized by X-ray crystallography and 27Al NMR spectroscopy.