Patterns in the precision of quantitative data from multicomponent gas chromatographic or gas chromatographic-mass spectrometric analysis

The dispersion of the quantitative results in the analysis of volatile compounds from multicomponent mixtures by different fractionation techniques (solid-phase microextraction and direct thermal desorption) followed by GC or GC-MS presents nonrandom patterns related to the existence of different factors in the fractionation process or in the chromatographic separation which affect, to a different extent, the recovery of the sample components. Statistical techniques have been used to show the relative importance of these factors. The improvement in data precision achieved by using volatile compound concentration ratios is discussed.     

Preparation and practical application of spinel pigment Co0.46Zn0.55(Ti0.064Cr0.91)2O4

Synthesis of the green spinel pigment Co_0.46Zn_0.55(Ti_0.064Cr_0.91)₂O₄ by a novel two-step method of preparation have been investigated. Inorganic pigments are almost always prepared by a solid state reaction. It is classical ceramic method which used oxides, hydroxides or carbonates as precursors. The reaction is performed at temperature higher than 1300°C and an agent of mineralization is usually present. The presented novel method of preparation decreases the calcining temperature necessary for reaching of bright and clear hue of the pigments prepared. Main attention was focused on the influence of two types of titanium raw materials on the temperature region of the spinel structure formation and on the colour properties of the pigments. The mixture of precursors with TiO₂ gives a one-phase system when calcining at 1100°C but the colour properties are more interesting at 1150°C. Thermal stability of this pigment is limited by temperature 1300°C. This temperature is connected with partial oxidation of Cr(III) to Cr(VI). Thermal analysis provided the first information about the temperature region of the pigment formation and determined the thermal stability of pigment.     

A two-stage approach to automatic determination of 1H NMR coupling constants

(1)H NMR scalar coupling constants are a rich source of information on molecular structure, but their extraction from spectra can be less than straightforward. Previous approaches to J extraction include methods proposed by Hoye, Golotvin, and the 'modified J-doubling' method. Here we describe the ACCA method, currently implemented in the NMR package MestReC, which allows a high degree of automation in the extraction of coupling patterns even in the case of complex multiplets with sublinewidth splitting. The new approach is illustrated by application to strychnine, for which it has detected previously unreported couplings.     

Synthetische Versuche in der Gruppe hypotensiv wirksamer Alkaloide, 13. Mitt.: Synthese vondl-10-Methyldeserpidin,dl-10-Äthoxydeserpidin unddl-10-Methylmercapto-deserpidin

Zusammenfassung Die durch Umsetzung von 5-Methyltryptamin, 5-Äthoxytryptamin und 5-Methylmercapto-tryptamin (I, R=CH₃, OC₂H₅ bzw. SCH₃) mit dem racemischen Aldehyd-Ester II entstandenenSchiffschen Basen wurden durch Natriumborhydrid-Reduktion in Methanol unter gleichzeitiger Cyclisierung und Desacetylierung in die entsprechenden 10-substituiertendl-Methyl-2,3-seco-3-oxodeserpidate (IV) übergeführt. Die bei der Einwirkung von 3,4,5-Trimethoxybenzoylchlorid in Pyridin erhaltenen Ester V wurden weiter mit Phosphoroxychlorid cyclisiert und die Produkte als Perchlorate (VI) mit Zink in sauerer Lösung zu den entsprechenden 10-substituiertendl-Deserpidinen (VII, R=CH₃, OC₂H₅ bzw. SCH₃) reduziert. Mit Hilfe der Chromatographie gelang es in zwei Fällen, aus den Rohprodukten auch die entsprechendendl-3-Isodeserpidine (VIII, R=CH₃ bzw. OC₂H₅) zu isolieren. Zum Unterscheiden der Produkte der normalen Reihe (VII) und der 3-Iso-Reihe (VIII) wurden IR-Spektren und die Papierchromatographie angewendet.Mit 2 Abbildungen     

Study on resolution capacity and secondary mechanisms of three different TSK gels for organic SEC

A comparative study on the elution behavior in size-exclusion chromatography (SEC) of three polymeric TSK gel packings, named H, H(HR), and H(XL) types, is performed. The deviations of the universal calibration (u.c.) curves of seven solvent-polymer systems show evidence that the existence of secondary effects accompanying the main SEC mechanism. These secondary mechanisms are a consequence of the binary enthalpic interactions between the different components of the chromatographic system, such as polymer-solvent, polymer-gel and solvent-gel. However, in the present case, the observed deviations from a unique u.c. curve can mainly be attributed to adsorption of polymeric solutes (analytes) onto the residual moieties of the gel surfaces, (i.e., to polymer-gel interactions). These enthalpic interactions can be quantitated by the values of the distribution coefficient, Kp, which follows the order: Kp (gel H(XL)) > Kp (gel H(HR)) > Kp (gel H). Moreover, the specific resolution of the three types of packings is also estimated, and its comparison yields that Rsp (gel H(HR)) > Rsp (gel H(XL)) > Rsp (gel H), in good agreement with their increasing particle size and decreasing crosslinking degrees. Finally, the errors and inaccuracies committed on the estimation of the sample average molar masses from their respective calibration curves serves the assessment that the packing with lesser secondary mechanisms is the H-type.     

Effect of oxidative stabilization on the electrochemical performance of carbon mesophases as electrode materials for lithium batteries

The effect of oxidative stabilization as a mean to modify the carbon texture was essayed in a group of mesophases previous to carbonization at 900 °C with the aim of evaluating the influence on electrochemical performance when used as electrode materials in lithium test cells. X-ray diffraction, optical microscopy and chemical analysis, Fourier-transform infrared spectroscopy have been used to describe the compositional and textural properties of the as-produced parent mesophases, the samples were further treated under air current to stabilize their microstructures and the corresponding carbonized samples at 900 °C. The electrochemical performance was determined by the galvanostatic method and further correlated to the physical–chemical properties and interface resistance of the materials. In all cases, the stabilization process has demonstrated a beneficial effect on the capacity retention in the measured range.     

A convenient enantioselective synthesis of (S)-alpha-trifluoromethylisoserine

[reaction: see text] This report describes two straightforward synthetic methodologies to obtain alpha-CF3-isoserine, a new alpha,alpha-disubstituted beta-amino acid, from alpha-(trifluoromethyl)acrylic acid. The routes involve the synthesis of five-membered cyclic sulfates (using sulfuryl chloride) or sulfamidates (using the Burgess reagent) from the corresponding chiral diols, which are obtained by a catalytic asymmetric dihydroxylation (AD) reaction.     

Slow water diffusion in micellar solutions

Slowly diffusing water molecules were found by quasi-elastic neutron scattering (QENS) in a sodium dodecyl sulfate (SDS) micellar solution, and both their diffusion coefficient (4.33 x 10(-6) cm2 x s(-1)) and mole fraction (0.057) were determined. After successfully checking the mean slowing down of solvent molecules by the gradient compensated stimulated spin-echo (GCSTE) pulse sequence NMR method, a similar effect was observed with this technique in the solvent phase of dodecyl trimethylammonium bromide (DTAB) and differing chain length (X = 12, 20, 30, and 40) ethoxylated nonyl phenol (9NX) micellar systems. Following the literature, the experimental results are qualitatively explained by assuming that, apart from ionic hydration, H-bonds may form between the solvent molecules and the O or N atoms present in the hydrophilic (head)groups of the micelle-forming monomers.     

On-line filtration system for determining total chromium and chromium in the soluble fraction of industrial effluents by flow injection flame atomic absorption spectrometry

Two manifolds were assessed for the purpose of determining both the total chromium content and that present as a soluble form in industrial effluents by flow injection flame atomic absorption spectrometry (FI-FAAS). To determine the chromium content in the soluble fraction the samples were used without additional treatment, a 0.45 microm filter being included in the FI system. To determine the total chromium content, the samples were acidified with nitric acid 20% (v/v) and heated for 30 s in a microwave oven (temperatures of about 70 degrees C were reached). The problem posed by the very different concentration range in which total and soluble chromium are present was overcome by using programmed flow rate methodology and by only partially emptying the sample loop. A personal computer controlled both the rotation speed of a peristaltic pump and the volume of sample injected into the system, thus obtaining the dispersion degree required. Using the manifold proposed, the chromium content in the soluble fraction can be determined in the 0.5-20 microg mL(-1) range using a 10 microg mL(-1) single standard for calibration. To determine the total chromium content, a calibration line in the 20-200 microg mL(-1) range was obtained using a single 50 microg mL(-1) chromium standard solution. The reliability of the semi-automatic devices was verified by comparing the results obtained with those found by treating the samples and using both FAAS in a conventional way and a spectrophotometric method using diphenylcarbazide at the 95% confidence level (ANOVA test). The proposed procedures showed a RSD lower than +/-3%.     

On Transition Structures for Hydride Transfer Step in Enzyme Catalysis. A Comparative Study on Models of Glutathione Reductase Derived from Semiempirical, HF, and DFT Methods

As a model of the chemical reactions that take place in the active site of gluthatione reductase, the nature of the molecular mechanism for the hydride transfer step has been characterized by means of accurate quantum chemical characterizations of transition structures. The calculations have been carried out with analytical gradients at AM1 and PM3 semiempirical procedures, ab initio at HF level with 3-21G, 4-31G, 6-31G, and 6-31G basis sets and BP86 and BLYP as density functional methods. The results of this study suggest that the endo relative orientation on the substrate imposed by the active site is optimal in polarizing the C4-Ht bond and situating the system in the neighborhood of the quadratic region of the transition structure associated to the hydride transfer step on potential energy surface. The endo arrangement of the transition structure results in optimal frontier HOMO orbital interaction between NADH and FAD partners. The geometries of the transition structures and the corresponding transition vectors, that contain the fundamental information relating reactive fluctuation patterns, are model independent and weakly dependent on the level of theory used to determine them. A comparison between simple and complex molecular models shows that there is a minimal set of coordinates describing the essentials of hydride transfer step. The analysis of transition vector components suggests that the primary and secondary kinetic isotope effects can be strongly coupled, and this prompted the calculation of deuterium and tritium primary, secondary, and primary and secondary kinetic isotope effects. The results obtained agree well with experimental data and demonstrate this coupling.