Source motion mitigation for adaptive matched field processing

Application of adaptive matched field processing to the problem of detecting quiet targets in shallow water is complicated by source motion, both the motion of the target and the motion of discrete interferers. Target motion causes spreading of the target peak, thereby reducing output signal power. Interferer motion increases the dimensionality of the interference subspace, reducing adaptive interference suppression. This paper presents three techniques that mitigate source motion problems in adaptive matched field processing. The first involves rank reduction, which enables adaptive weight computation over short observation intervals where motion effects are less pronounced. The other two techniques specifically compensate for source motion. Explicit target motion compensation reduces target motion mismatch by focusing snapshots according to a target velocity hypothesis. And time-varying interference filtering places time-varying nulls on moving interferers not otherwise suppressed by adaptive weights. The three techniques are applied to volumetric array data from the Santa Barbara Channel Experiment and are shown to improve output signal-to-background-plus-noise ratio by more than 3 dB over the standard minimum-variance, distortionless response adaptive beam-former. Application of the techniques in some cases proves to be the difference between detecting and not detecting the target.     

Sensitised near-infrared emission from lanthanides using a covalently-attached Pt(II) fragment as an antenna group

In a series of heterodinuclear complexes in which a Pt(PPh3)2(catecholate) chromophore is covalently linked to a lanthanide tris(diketonate) unit, sensitised near-IR emission from Yb(III), Nd(III) and Er(III) occurs on excitation of the Pt(II) chromophore at 520 nm.     

Glycosyl phenylthiosulfonates (glyco-PTS): novel reagents for glycoprotein synthesis

Controlled site-selective glycosylation can be achieved by combining site-directed cysteine mutagenesis with chemical modification of the introduced thiol; a new class of more efficient chemoselective reagents, glycosyl phenylthiosulfonates, allow rapid glycosylations of representative simple thiols, peptides and proteins.     

Structural characterization of crystalline ternary inclusion compounds at the air-water interface

Crystalline ternary inclusion monolayers consisting of a two-dimensional hydrogen-bonded host network of guanidinium (G) ions and organosulfonate (S) amphiphiles, and biphenylalkane guests, can be generated at the air-water interface through synergistic structural enforcement by hydrogen bonding and host-guest packing. Surface pressure-area isotherms of the 4'-hexadecylbiphenyl-4-sulfonate (C16BPS) amphiphile in the presence of G, with or without guest, are characterized by lift-off molecular areas expected for the GS sheet based on single-crystal X-ray structures of homologous bulk crystals. Intercalation of biphenylalkane guests (4-C(n)()H(2)(n)()(+1)-C(6)H(4)-C(6)H(5), n = 1, 4, 6, 10, 16; denoted CnBP) between organosulfonate hydrophobes, which define pocketlike cavities in the GS monolayer host, afford ternary inclusion monolayers with a 1:1 host-guest stoichiometry. These inclusion monolayers are less compressible than the guest-free host, consistent with dense packing of the biphenylalkane moieties of the host and the biphenylalkane guests. The inclusion monolayers are distinguished from the amorphous guest-free host and from selected guanidinium-free mixed monolayers by structural characterization with grazing-angle incidence X-ray diffraction (GIXD). The GIXD data for the ternary (G)C16BPS:C16BP and (G)C16BPS:C6BP inclusion monolayers obtained upon compression are consistent with a rectangular unit cell. The dimensions of these unit cells and refinement of the GIXD data suggest a "rotated shifted ribbon" GS hydrogen-bonding motif similar to that observed in some bulk GS crystals, including (G)(ethylbiphenylsulfonate). GIXD reveals that (G)C16BPS:C16BP and (G)C16BPS:C6BP are more crystalline than the corresponding guanidinium-free mixed monolayers. The (G)C16BPS:C6BP inclusion monolayer is stable upon compression, even though the alkyl-alkyl host-guest interactions are reduced due to the shorter hexyl substituents of the guest, demonstrating an important reinforcing role for the hydrogen-bonded GS sheet. The structure of a C16BPS:tetracosane (C24) mixed monolayer is independent of G; the unit cell symmetry and dimensions suggest a structure governed by alkyl-alkane interactions that prohibit formation of a GS network. These results illustrate that the existence of ternary inclusion monolayers with an intact GS network requires guest molecules that are structurally homologous with the hydrophobes of the host, in this case biphenylalkanes. The observation of these inclusion compounds suggests an approach for introducing functional nonamphiphilic molecules to an air-water interface through inclusion in a well-defined host.     

High‐throughput characterization of pattern formation in symmetric diblock copolymer films

Surface‐pattern formation in thin block copolymer films was investigated by utilizing a high‐throughput methodology to validate the combinatorial measurement approach and to demonstrate the value of the combinatorial method for scientific investigation. We constructed measurement libraries from images of subregions of block copolymer films having gradients in film thickness and a range of molecular mass, M. A single gradient film covers a wide range of film morphologies and contains information equivalent to a large number of measurements of films having a fixed thickness, h. Notably, the scale of the surface patterns is generally much larger than the molecular dimensions so that the interpretation of the patterns is more subtle than ordering in bulk block copolymer materials, and there is no predictive theory of this type of surface‐pattern formation. We observed a succession of surface patterns that repeat across the film with increasing h [extended smooth regions, regions containing circular islands, labyrinthine (“spinodal”) patterns, holes, and smooth regions again]. The extended smooth regions and the labyrinthine patterns appear to be novel features revealed by our combinatorial study, and these patterns occurred as bands of h that were quantized by integral multiples of the bulk lamellar period, L_o. The magnitude of the height gradient influenced the width of the bands, and the smooth regions occupied an increasing fraction of the film‐surface area with an increasing film gradient. The average size of the spinodal patterns, λ, was found to scale as λ ～ L or λ ～ M^?1.65 and reached a limiting size at long annealing times. The hole and island features had a size comparable to λ, and their size likewise decreased with increasing M. The smooth regions were attributed to an increase in the surface‐chain density in the outer brushlike block copolymer layer with increasing h, and the scaling of λ with M was interpreted in terms of the increasing surface elasticity with M. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2141–2158, 2001     

High-spin structure of N\simeq Z nuclei around the A = 72 region

High-spin states have been studied in ⁷²Kr and ⁷²Br using the ⁴⁰Ca + ⁴⁰Ca and ³⁶Ar + ⁴⁰Ca reactions at 164 and 145 MeV, respectively. The properties and configurations of the high-spin bands observed have been interpreted using unpaired cranked Nilsson-Strutinsky (CNS), and for ⁷²Kr, paired cranked relativistic Hartree-Bogoliubov (CRHB) calculations. In ⁷²Kr a new band has been identified that has the properties expected for the doubly aligned S-band configuration. In ⁷²Br the previously known bands have been extended to higher spin. This has lead to a re-interpretation of the configurations.Received: 31 October 2002, Published online: 24 February 2004PACS: 21.10.Re Collective levels - 23.20.Lv transitions and level energies - 27.50. + e      

Further observations on the variation with dielectric constant and thickness of the reflectance and phase change on reflection of films

Studies of the behaviour with ₁, ₂ and film thickness of the optical functions reflectance (R) and phase change on reflection (Φ_r) have previously been made for both very thin and very thick films. Abelès [J. Opt. Soc. Amer. 47 (1957) 473] has formulated equations for very thin films where functions of ₁ and ₂ are the coefficients of a power series of the optical thickness, x(2πd/λ) up to x², whilst in the case of very thick films (solids) the relationships between ₁ and ₂ can be represented in polar coordinates L and α by ₁=L cos α, ₂=L sin α where L_R=2y²₀W²(1+cos α−1/W²) [W=(1+R)/(1−R)] and L_Φr=2(y₀/ tan Φ_r)²(1−cos α+tan ² Φ_r) [Ward, Opt. and Laser Tech. 27 (1995) 125]. The present study is concerned with films of intermediate optical thicknesses (1.0<2πd/λ<solid) and has revealed that the polar-type relationships previously noted for solid materials are augmented by secondary structures of maxima and minima whose position and amplitude can be predicted by adapting the exact equations for R and Φ_r.     

MtsslWizard: In Silico Spin-Labeling and Generation of Distance Distributions in PyMOL

MtsslWizard is a computer program, which operates as a plugin for the PyMOL molecular graphics system. MtsslWizard estimates distances between spin labels on proteins quickly with user-configurable options through a simple graphical interface. In default mode, the program searches for ensembles of possible MTSSL conformations that do not clash with a static model of the protein. Once conformations are assigned, distance distributions between two or more ensembles are calculated, displayed, and can be exported to other software. The program’s use is evaluated in a number of challenging test cases and its strengths and weaknesses evaluated. The benefits of the program are its accuracy and simplicity.