Enhancing aperiodic stochastic resonance through noise modulation

We show that the conventional stochastic resonance (SR) effect for aperiodic signals in a model neuron can be enhanced by modulating the intensity of the input noise (which could be introduced artificially in bioengineering applications) with either the input signal or the unit's output rate signal. We analyze SR enhancement theoretically and numerically. We discuss how this work provides the theoretical foundation for the development of an optimal noise-based technique for enhancing sensory function. (c) 1998 American Institute of Physics.     

Curtius rearrangement in the 5-phenyl-1,4-benzodiazepine series. Unprecedented participation by an imine nitrogen

The previously unknown 3-aminomethyl-1,3-dihydro-5-(2′-fluorophenyl)-2H,4-benzodiazepin-2-one, 3a, was synthesized in two steps as a racemate. In the chiral series, 3(S)-azidocarbonylmethyl-1,3-dihydro-5-phenyl-2H-1,4-benzodiazepin-2-one, 12b, was prepared from Nα-Cbz-β-methylaspartate in five synthetic operations and subjected to Curtius rearrangement. The intermediate isocyanate was trapped intramolecularly by the 5-imine nitrogen of the benzodiazepine ring in 12b. This unanticipated result runs counter to the generally held dictum that the isocyanate group has a strictly linear shape.     

Evaluation of the BAX system for detection of Listeria monocytogenes in foods: collaborative study

A multilaboratory study was conducted to compare the automated BAX system and the standard cultural methods for detection of Listeria monocytogenes in foods. Six food types (frankfurters, soft cheese, smoked salmon, raw, ground beef, fresh radishes, and frozen peas) were analyzed by each method. For each food type, 3 inoculation levels were tested: high (average of 2 CFU/g), low (average of 0.2 CFU/g) and uninoculated controls. A total of 25 laboratories representing government and industry participated. Of the 2335 samples analyzed, 1109 were positive by the BAX system and 1115 were positive by the standard method. A Chi square analysis of each of the 6 food types, at the 3 inoculation levels tested, was performed. For all foods, except radishes, the BAX system performed as well as or better than the standard reference methods based on the Chi square results.     

The thermal,spectral and magnetic studies ofp-tolylacetic acid compounds of cobalt,nickel and copper

The preparation and some properties of complexes ofp-tolylacetic acid with cobalt, nickel and copper are described. Magnetic measurements, electronic and far infrared spectra show that the metal complexes have octahedral structures. Infrared spectra indicate that coordination takes place through the carboxyl group to the metal ions and that the water molecule in each of the complexes is present as water of crystallisation. Thermogravimetry studies also show that the water molecules in each of the complexes do not form a coordinate bond with the metal ion. Differential thermal analysis show that the dehydration processes are accompanied by endothermic reactions. In each case the anhydrous metal complex undergoes an exothermic reaction to give the metal oxide.This work was supported by the Carnegie Trust for the Universities of Scotland and the Hungarian OTKA foundation (T-4096).     

Acoustic generation of bubbles in excised canine urinary bladders

A high-intensity, 555-kHz acoustic field was used to generate bubbles within urinary bladders excised from dogs. Following the exposure, bubbles were visualized on a diagnostic ultrasound scanner with a 5-MHz in-line mechanical sector scanhead. Scattering of the high-intensity ultrasound by the bubbles was also observed during the exposure as high-amplitude scan lines. The bladders used had been surgically removed after tying off the ureters and urethra to prevent urine loss and exposure to external contaminants. Each bladder was sealed in a plastic bag filled with a degassed saline solution. The bladder was centered in a sealed degassed water path at the common focus of a 7-cm-diam transducer and a 10-cm-diam brass reflector. The 555-kHz transducer and reflector were both focused at 10 cm and were aligned coaxially. Using various acoustic pressure amplitudes, two, 10-s low-frequency exposures, separated by approximately 30 s, occurred at approximately 2-min intervals. Experiments on a single bladder lasted as long as 45 min. The sizes of the largest bubbles, which were easily imaged, were estimated from rise velocity measurements as 50-70 microns in radius, and pressure amplitudes used to generate those large bubbles were estimated as 10-20 bars. The detection of smaller bubbles was limited by the inability to clearly distinguish bubble echoes from artifacts caused by the reverberant field within the bladder. Visual inspection of the exterior and interior bladder wall showed no significant discoloration within the high intensity beam path.(ABSTRACT TRUNCATED AT 250 WORDS)     

Quantification of E. coli adhesion to polyamides and polystyrene with atomic force microscopy

Atomic force microscopy (AFM) was used to measure adhesion forces between E. coli bacteria and surfaces consisting of a series of polyamides and polystyrene, materials that are prominent in carpeting, upholstery, and other indoor surfaces. Bioparticle adhesion to such surfaces in air is poorly understood, yet these interactions are thought to play a key role in their accumulation and release as indoor air pollutants. The polymers employed were polyamide 6 (PA6), polyamide 6,6 (PA66), polyamide 12 (PA12) and polystyrene (PS). We report the interaction forces between immobilized E. coli and AFM tips coated with each polymer. The adhesion forces for the tip-bacterial interactions were in the range between 2.9 and 6.7 nN, which is of the same magnitude as the polymer-polymer interactions for the same series of polymers. Polystyrene had stronger adhesion with E. coli than any of the three polyamides, by an average factor of 1.4. The work of adhesion and Hamaker constants of the probe-surface interactions were calculated using a square-pyramid flat-surface model developed previously. A drag-force analysis suggests that model spheres with the same adhesion force as E. coli-poly(amide) (F approximately 4 nN) will remain adherent under normal foot traffic (F approximately 0.2 nN), but will release during vacuum cleaning (F>or=30 nN).     

Accelerated solvent extraction of fluometuron from selected soils

Accelerated solvent extraction (ASE) is a recently developed extraction technique that is more rapid and produces less waste than do conventional liquid/liquid extraction methods. Optimal conditions were determined for ASE of fluometuron from 2 Weswood clay loam soils. Two solvents (acetonitrile and methanol), 2 temperatures (50 and 100 degrees C), and the number of static cycles (1, 2, and 3) were evaluated. The most efficient and reproducible extractions were obtained when methanol was combined with a 50 degrees C extraction temperature and the static cycle was repeated 3 times. These experiments indicated that existing extraction methods for fluometuron can easily be adapted for ASE.     

Rise of the Robots

High-throughput experimentation (HTE) is a growing, enabling technology that allows the execution of large, parallel sets of experiments. Often, automation is required to dose compounds on milligram to sub-milligram scale, to run many parallel reactions, and to analyse large datasets. Unique approaches to screen design, implementation, and analysis are required, distinct from traditional synthetic organic chemistry. The discipline also presents a profitable opportunity for individual scientists to learn about and explore fields adjacent to chemistry, including data science, robotics and equipment engineering, and computer programming. This perspective presents the author's viewpoints on the field of HTE, its implementation within a chemistry career, and the automated future of organic chemistry technology.