Characterization of Pentaclethra macroloba oil

The Pracaxi oil—(Pentaclethra macroloba) contains high concentrations of fatty acids with emollient action that contribute to skin hydration. The use of this oil is supported by the utilization of natural resources thus enabling regional development and social contribution. The objective of this study was to characterize the P. macroloba oil by thermogravimetry (TG, DTG, and DTA), gas chromatography, Fourier transform infrared spectroscopy (FT-IR), and oxidation stability—Rancimat, aiming at the quality control of plant raw material. Three samples of crude oil sold by Amazon Oil Industry (Ananindeua, Pará, Brazil) were studied. The analysis of these oil samples showed different fatty acids, especially the behenic, oleic, linoleic, and lignoceric acids totalizing approximately 96 % of the grease composition and in smaller percentage arachidic, lauric, myristic, palmitic, and linolenic acids were found. The major acids have wide medicinal use. According to the TG/DTG curve, thermal stability was observed up to 220 °C, indicating a greater mass loss related to the dehydration and elimination of volatile substances. The thermal decomposition process occurred in the range of 430–450° C according to the DTG curve. The absorption spectrum in the infrared region (FT-IR) showed well-defined bands confirming the presence of functional groups present in the oil. Tests in a Rancimat have shown an induction period between 8 and 10 h demonstrating that the samples are in agreement with the standards required by ANP No. 14/2012 which requires at least 6 h of testing.     

Continuous monitoring of ascorbate transport through neuroblastoma cells with a ruthenium oxide hexacyanoferrate modified microelectrode

The uptake of ascorbate by neuroblastoma cells using a ruthenium oxide hexacyanoferrate (RuOHCF)-modified carbon fiber disc (CFD) microelectrode (r = 14.5 microm) was investigated. By use of the proposed electrochemical sensor the amperometric determination of ascorbate was performed at 0.0 V in minimum essential medium (MEM, pH = 7.2) with a limit of detection of 25 micromol L(-1). Under the optimum experimental conditions, no interference from MEM constituents and reduced glutathione (used to prevent the oxidation of ascorbate during the experiments) was noticed. The stability of the RuOHCF-modified electrode response was studied by measuring the sensitivity over an extended period of time (120 h), a decrease of around 10% being noticed at the end of the experiment. The rate of ascorbate uptake by control human neuroblastoma SH-SY5Y cells, and cells transfected with wild-type Cu,Zn-superoxide dismutase (SOD WT) or with a mutant typical of familial amyotrophic lateral sclerosis (SOD G93A), was in agreement with the level of oxidative stress in these cells. The usefulness of the RuOHCF-modified microelectrode for in vivo monitoring of ascorbate inside neuroblastoma cells was also demonstrated.     

Comparative reductive desymmetrization of 2,2-disubstituted-cycloalkane-1,3-diones

Reductive desymmetrization of 2-methyl-2-substituted-cycloalkane-1,3-diones can be effected using either NaBH₄ in DME or lithium tri-tert-butoxyaluminum hydride (LTBA) in THF at −60 °C. The former is a new approach that offers slightly greater diastereoselectivity in the reduction of 2,2-disubstituted-cyclopentane-1,3-diones while LTBA is superior with 2,2-disubstituted-cyclohexane-1,3-diones. Both conditions minimize subsequent reduction to diols thereby furnishing high yields of 1,3-ketols. Particularly rapid monoreductions are observed with 2-methyl-2-nitroethylcyclopentane-1,3-dione and 2-cyanoethyl-2-methylcyclopentane-1,3-dione when treated with NaBH₄ in DME at −60 °C. As expected, diastereoselectivity varies considerably with the substitution at C-2.     

Functional polymers: scanning force microscopy insights

Scanning force microscopy (SFM) and related techniques make it possible to visualize polymer systems with a molecular resolution. Beyond imaging, they also enable the unveiling of a variety of (dynamic) physico-chemical properties of both isolated polymer chains and their supramolecular architectures, including structural, mechanical and electronic properties. This article reviews recent progress in the use of SFM on polymers, with a particular emphasis on the mechanical properties of copolymers and single polymer chains, as well as on the bottom-up fabrication of supramolecular polymeric (helical) nanostructures in particular based upon pi-conjugated macromolecules as building blocks for nanoelectronics. Through a detailed understanding of the polymer behavior, we propose solutions for the generation of organic functional (nano)systems.     

Fast gradient elution reversed-phase liquid chromatography with diode-array detection as a high-throughput screening method for drugs of abuse. II. Data analysis

In Part I of this work, we developed a method for the detection of drugs of abuse in biological samples based on fast gradient elution liquid-chromatography coupled with diode array spectroscopic detection (LC-DAD). In this part of the work, we apply the chemometric method of target factor analysis (TFA) to the chromatograms. This algorithm identifies the target compounds present in chromatograms based on a spectral library, resolves nearly co-eluting components, and differentiates between drugs with similar spectra. The ability to resolve highly overlapped peaks using the spectral data afforded by the DAD is what distinguishes the present method from conventional library searching methods. Our library has a mean list length (MLL) of 1.255 and a discriminating power of 0.997 when both retention index and spectral factors are considered. The algorithm compares a library of 47 different compounds of toxicological relevance to unknown samples and identifies which compounds are present based on spectral and retention index matching. The application of a corrected retention index for identification rather than raw retention times compensates for long-term and column-to-column retention time shifts and allows for the use of a single library of spectral and retention data. Training data sets were used to establish the search and identification parameters of the method. A validation data set of 70 chromatograms was used to calculate the sensitivity (correct identification of positives) and specificity (correct identification of negatives) of the method, which were found to be 92% and 94%, respectively.     

Reversible interconversion between a supramolecular polymer and a discrete octameric species from a guanosine derivative by dynamic cation binding and release

[reaction: see text] The tunable interconversion between two highly ordered supramolecular motifs (G-quartet K(+)-templated column and G-ribbon) of a lipophilic guanosine derivative fueled by cation complexation and release in a cryptand [2.2.2] containing guanosine solution is reported. The process is controlled by the sequential addition of acid and base.     

Synthesis and complexation properties of novel triazoyl-based ferrocenyl ligands

Two new ligand derivatives of ferrocene, namely N-4-[3,5-di-(2-pyridyl)-1,2,4-triazoyl]ferrocene carbimine (L1) and N-4-[3,5-di-(2-pyridyl)-1,2,4-triazoyl]ferrocene carbamide (L2), were synthesised in good yields by reacting the known compound 3,5-di-pyridine-2-yl-[1,2,4]triazol-4-ylamine (1) with ferrocenecarbaldehyde and chlorocarbonyl ferrocene, respectively. The structures of L1 and L2 were determined by X-ray crystallography. The complexation of L1 and L2 with Cu^I, Ag^I, Zn^II and Cd^II was studied by NMR and UV-vis spectroscopies, as well as by electrochemistry, with titrations used to determine metal:ligand stoichiometries. The cyclic voltammograms of L1 and L2 and their respective complexes indicated reversible one-electron transfers corresponding to the Fc^0/+ redox couple (Fc = ferrocene), with formal electrode potentials shifting to more positive values upon metal complexation.     

Network dimensionality and ligand flexibility in lanthanide terephthalate hydrates

Various lanthanide open framework materials incorporating the terephthalate (TP) entity were prepared using hydrothermal synthesis methods at a moderate temperature of 170 °C. The compounds Nd₂(TP)₃(H₂O)₄(1), Er₂(TP)₃(H₂O)₄(2), Yb₂(TP)₃(H₂O)₂(3), Yb₂(TP)₃(H₂O)₆(4), and Yb₂(TP)₃(H₂O)₈·2H₂O (5), were characterized by single crystal structural analysis and FT-IR spectroscopy. While compounds 1 and 2 have been reported before on the basis of powder X-ray diffraction, the structural characterization of any ytterbium terephthalate species is unprecedented. Compounds 1-5 crystallize in triclinic settings with space group P-1. The compounds are compared with their previously reported Er and Tb-counterparts and the reduction of the dimensionality of the resulting networks from 3D over 2D to 1D with increasing level of hydration is discussed. Compounds 1, 2, and 3 with the lowest water content assemble in three-dimensional network lattices. Compounds 4 and 5, however, form 2D layered systems and 1D rod like chains, respectively, which are held together by hydrogen bonds originating from coordinating H₂O. The crystal lattices of the 3D networks experience higher levels of tension as can be seen by increasing out-of-plane torsion with regard to the terephthalate carboxylate groups. Moreover, there seems to be a correlation between the level of strain on the aromatic ligands and the reduction of the number of carboxylate oxygen atoms that are part of the coordination polyhedra.     

Relationship between selectivity and average resolution in comprehensive two-dimensional separations with spectroscopic detection

The average value of the multivariate selectivity (SEL) of randomly positioned peaks in a multi-component separation is shown to equal the average fraction of peaks that are singlets, as predicted by statistical-overlap theory (SOT). This equality is the basis for proposing a useful metric, specifically the average minimum resolution of nearest-neighbor peaks, for the performance of comprehensive two-dimensional (2D) separations. Furthermore this metric was computed both without ancillary spectroscopic information and with the assistance of such help, specifically multi-wavelength UV-vis spectra, acquired during the separation. Separations are simulated with randomly positioned peaks over wide ranges of total number of peaks, first- and second-dimension peak capacity, dimensionless first-dimension sampling time, and spectral diversity. The specific version of the general multivariate selectivity concept that is used here--identified as SEL--gives the relative precision of quantification when using the PARAFAC (parallel factor analysis) method, a popular curve resolution algorithm. The SEL values of all peaks were calculated, averaged, and compared to the predictions of SOT. In the absence of auxiliary spectral data, the SEL-based average minimum resolution required to separate two peaks in a 2D separation is 0.256, compared to resolution of 0.5 if no chemometric assistance is available. This was found to be valid over a wide range of conditions and is essentially independent of peak crowding. With the assistance of the spectral data, the requisite minimum resolution substantially improves, that is, it decreases, especially when peak crowding is severe. The requisite minimum resolution decreases even further, up to a limit, as the spectral diversity is increased. In contrast, the SEL-based average under-sampling correction factor is virtually independent of the presence of the additional spectral data, and additionally is about the same as calculated with SOT from the average number of maxima in closely analogous simulations. The use of selectivity greatly increases the fraction of peaks that are singlets, relative to the number of singlet maxima, especially when spectral assistance is added. The insensitivity of the under-sampling correction factor to either the use of selectivity or added spectral data simplifies optimization of the corrected peak capacity in on-line comprehensive 2D separations.