The use of high-speed differential scanning calorimetry (Hyper-DSC™) to study the thermal properties of carbamazepine polymorphs

The thermal properties of two polymorphs of the drug carbamazepine, Forms I and III, were studied using high-speed differential scanning calorimetry (DSC). Previously, accurate determination of the heat enthalpy of fusion of Form III has not been possible using DSC at typical heating rates, due to concurrent exothermic recrystallisation to the higher-melting Form I. Here, it is demonstrated that heating rates of 250° C/min altered the kinetics of the melting transition of Form III such that this concurrent exothermic recrystallisation was inhibited. This allowed direct measurement of the enthalpy of the melting endotherm for Form III from a single transition. The enthalpy of this transition was found to be 109.5 J/g. Further investigations were then performed to test the utility of this technique in quantifying relative amounts of Forms I and III in mixtures of the two polymorphs. It was demonstrated that a limit of detection of 1% (w/w) was possible in this system. However, accurate quantification was not possible due to seeding effects initiating recrystallisation to Form I in these mixtures, even at these elevated heating rates. The utility of this novel technique as a fast analytical tool for studying the polymorphic behaviour of metastable polymorphs has been successfully demonstrated.     

A resonance Raman,surface-enhanced resonance Raman,IR, and ab initio vibrational spectroscopic study of nickel(II) tetraazaannulene complexes

The IR and resonance Raman spectra of the nickel(II) complexes of dibenzo[b,i][1,4,8,11]tetraaza[14]annulene (TAA) and 5,7,12,14-tetramethyldibenzo[b,i][1,4,8,11]tetraaza[14]annulene (TMTAA) have been measured and compared with ab initio calculations of the vibrational wavenumbers at the B3-LYP level using the LanL2DZ basis set. An excellent fit is found between the experimental and calculated data, enabling precise vibrational assignments to be made. Surface-enhanced resonance Raman spectra were obtained following adsorption on Ag electrodes, with potentials in the range -0.1 to -1.1 V vs Ag/AgCl. There is evidence for contributions from both the electromagnetic and charge transfer (CT) surface enhancement mechanisms. The data indicate that variations in band intensities with electrode potential can be interpreted in terms of the CT mechanism.     

Analysis of the contribution of skeletal vibrations to the heat capacity of linear macromolecules in the solid state

Automatic computer programs are developed to calculate one- two-, and three-dimensional Debye functions. Prior tables of these functions are critically reviewed. Also, strategies are derived to calculate Debye temperatures from heat capacities. Both, simple three-dimensional Debye analyses and Tarasov analyses were carried out on 35 linear macromolecules. The experimental heat capacities for these analyses were collected in the ATHAS data bank. It is shown that the skeletal heat capacity of linear macromolecules is often best represented by only two vibrations per chain atom. For most of the all-carbon chain macromolecules the intramolecular skeletal heat capacity can be given by C_vs=D₁[520 (28/MW)^1/2] whereMW is the molecular mass andD ₁ represents the one-dimensional Debye function. Polyoxides show a higher intramolecular theta temperature, but a lower intermolecular theta temperature. Double bonds and phenylene groups in the chain increase the intramolecular theta temperature.Dedicated to Prof. Dr. F. H. Müller.On leave from the Lumumba Peoples' Friendship University, Moscow, USSR.     

The reaction of chlorine monofluoride with selenium dioxide,tetrachloride and sulphur tetrachloride

Chlorine monofluoride reacts with SCl₄ and SeCl₄ to give the corresponding tetrafluorides, with SeO₂ it yields SeOF₂ and with excess ClF, SeF₄. The behaviour of the tetrafluorides, tetrachlorides, dioxides, and oxydifluorides of sulphur, selenium and tellurium with ClF are compared.     

Controlled kinetics of non-enzymatic chemiluminescence reactions for simple imaging of DNA and protein

A robust and sensitive non-enzymatic chemiluminescence (CL) imaging method is presented. In the method a fast-emitting CL reaction is tuned to furnish a slower-emitting reaction suitable for simple CL imaging. Typically, non-enzymatic CL reactions between luminol or fluorescein and oxygen species generated by KCN as catalyst, were rather fast and unsuitable for CL imaging; the speed of the reactions could, however, be reduced substantially by changing KCN for CH(3)CN or benzonitrile. Light emission from the tuned CL reaction was intense and long-lived, and even with a simple arrangement high sensitivity could be achieved. The maximum CL peak was reached after approximately 1.5 min in the presence of 25% acetonitrile, and as little as 16 fmol commercial isoluminol-labeled streptavidin was detected and visualized on either microplate or membrane. The approach was further illustrated by imaging of DNA on a membrane and of antibody on a microplate by use of biotin-streptavidin chemistry. Overall, this simple, economical, and sensitive CL imaging system is expected to be very useful in biochemical analysis, and greatly complements currently used enzyme-based CL imaging methods, especially in routine applications.     

PROBING PHOTODYNAMIC DAMAGE IN NUCLEIC ACIDS WITH A DAMAGE-SPECIFIC DNA BINDING PROTEIN: A COMPARISON OF THE B and Z DNA CONFORMATIONS

—We have employed a damage-specific DNA binding protein from human cells as a probe for base damage in polymers irradiated with white light in the presence of methylene blue. Protein-recognizable damage is introduced only into guanine-containing polymers and quenching of damage introduction by H₂O and sodium azide suggest the involvement of a singlet oxygen mechanism. Using poly d(G-m⁵C), we have demonstrated that the left-handed double helical Z conformation is much less susceptible to guanine photooxidation than is the usual B conformation. We speculate that this difference in reactivity may reflect steric hindrance at the purine C-4 position and could provide some insight into the initial steps of the reaction between singlet oxygen and guanine in nucleic acid polymers.     

Electrochemistry of niobium(V) in sulfuric and methanesulfonic acids: formation of the Nb3O2(SO4)6(H2O)(3)(5-) cluster and designed electrochemical generation of "Nb3O2" core clusters by double potential pulse electrolysis

The electrochemical and spectroelectrochemical properties of niobium(V) and the Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) cluster in sulfuric acid and methanesulfonic acid were investigated using cyclic voltammetry, constant potential electrolysis, and spectroelectrochemistry. These chemical systems were suitable to probe the formation of "Nb(3)O(2)" core trinuclear clusters. In 9 M H(2)SO(4) the cluster Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) exhibited a reversible 1-electron reduction peak at E(pc) = -1.30 V vs Hg/Hg(2)SO(4) electrode, as well as a 4-electron irreversible oxidation peak at E(pa) = -0.45 V. Controlled potential reduction at E = -1.40 V produced the green Nb(3.33+) cluster anion Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(6-). In 12 M H(2)SO(4) Nb(V) displayed two reduction peaks at E(pc) = -1.15 V and E(pc) = -1.30 V. It was determined that the first process involves a quasi-reversible 2-electron reduction. After reduction of Nb(V) to Nb(III) the following chemical step involves formation of [Nb(III)](2) dimer, which further reacts with Nb(V) to produce the Nb(3)O(2)(SO(4))(6(H(2)O)(3)(5-) cluster (ECC process). The second reduction peak at E(pc) = -1.30 V corresponds to further 2-electron reduction of Nb(III) to Nb(I). The electrogenerated Nb(I) species also chemically reacts with starting material Nb(V) to produce additional [Nb(III)](2). In 5 M H(2)SO(4), the rate of the second chemical step in the ECC process is relatively slower and reduction of Nb(V) at E = -1.45 V/-1.2 V produces a mixture of Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) and [Nb(III)](2) dimer. [Nb(III)](2) can be selectively oxidized by two 2-electron steps at E = -0.65 V to Nb(V). However, if the oxidation is performed at E = -0.86 V, the product is Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-). A double potential pulse electrolysis waveform was developed to direct the reduction of Nb(V) toward selective formation of the Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) cluster. Proper application of dc-voltage pulses alternating between E(1) = -1.45 V and E(2) = -0.86 V yields only the target trinuclear cluster. Analogous double potential pulse electrolysis of Nb(V) in methanesulfonic acid generates the "Nb(3)O(2)" core cluster Nb(3)O(2)(CH(3)SO(3))(6)(H(2)O)(3)(+).     

Stabilization of excess charge in isolated adenosine 5'-triphosphate and adenosine 5'-diphosphate multiply and singly charged anions

Multiply charged anions (MCAs) represent highly energetic species in the gas phase but can be stabilized through formation of molecular clusters with solvent molecules or counterions. We explore the intramolecular stabilization of excess negative charge in gas-phase MCAs by probing the intrinsic stability of the [adenosine 5'-triphosphate-2H](2-) ([ATP-2H](2-)), [adenosine 5'-diphosphate-2H](2-) ([ADP-2H](2-)), and H(3)P(3)O(10)(2-) dianions and their protonated monoanionic analogues. The relative activation barriers for decay of the dianions via electron detachment or ionic fragmentation are investigated using resonance excitation of ions isolated within a quadrupole trap. All of the dianions decayed via ionic fragmentation demonstrating that the repulsive Coulomb barriers (RCB) for ionic fragmentation lie below the RCBs for electron detachment. Both the electrospray ionization mass spectra (ESI-MS) and total fragmentation energies for [ATP-2H](2-), [ADP-2H](2-), and H(3)P(3)O(10)(2-) indicate that the multiply charged H(3)P(3)O(10)(2-) phosphate moiety is stabilized by the presence of the adenosine group and the stability of the dianions increases in the order H(3)P(3)O(10)(2-) < [ADP-2H](2-) < [ATP-2H](2-). Fully optimized, B3LYP/6-31+G* minimum energy structures illustrate that the excess charges in all of the phosphate anions are stabilized by intramolecular hydrogen bonding either within the phosphate chain or between the phosphate and the adenosine. We develop a model to illustrate that the relative magnitudes of the RCBs and hence the stability of these ions is dominated by the extent of intramolecular hydrogen bonding.     

Analysis of organic acids and inorganic anions in beverage drinks by capillary electrophoresis

To meet the need for a new and validated analytical method for simultaneous determination of inorganic and organic acid anions in beverage drinks, a capillary zone electrophoresis (CZE) procedure had been developed based on a new background electrolyte (BGE) system containing 3 mmol/L 1,3,5-benzenetricarboxylic acid (BTA), 15 mmol/L tris(hydroxymethyl)aminomethane and 1.5 mmol/L tetraethylenepentamine (TEPA) at pH 8.4. Baseline separation of anions commonly found in beverage drinks could be achieved in less than 14 min with indirect UV detection at 240 nm. Comigration problems for hydroxycarboxylic acids could be solved using TEPA as BGE additive. The results indicate excellent repeatability for migration time (RSD, 0.27-0.67%, n = 5) and good precision for both peak height (RSD, 3.2-4.2%, n = 5) and peak area (RSD, 3.1-4.5%, n = 5). Under the optimized conditions and using corrected peak area for quantitation, an excellent linear dynamic range (with correlation coefficient > 0.997 in a concentration range from 0.005 to 2.0 mmol/L) and low detection limit (1-4 micro mol/L) were obtained for all the anions investigated. The applicability and reliability of the CE procedure developed were established by parallel method determination using established ion chromatography procedure for the analysis of inorganic and organic acid anions in orange juice and wine samples. Our CZE procedure provided a sensitive and economic technique for simultaneous determination of inorganic and organic acid anions in orange juice, red and white wine samples.     

An annulene-fused cyclopentadienide. A photochromic cyclopentadienodimethyldihydropyrene where the fused cyclopentadienide group resembles benzene in its effect on the dihydropyrene-metacyclophanediene valence isomerization

The synthesis of the green cyclopentadiene-fused dimethyldihydropyrene 12 was achieved in 36% yield in 7 steps from the parent dihydropyrene 3. Reaction of 12 with KH or LiCH(2)SiMe(3) gave the [14]annulene-fused cyclopentadienide anion quantitatively. In the (1)H NMR spectra, the internal methyl protons of 12 at delta -3.9, change dramatically on formation of anion 5, becoming deshielded to delta -1.82. This is caused by the reduction in diatropicity of the [14]annulene ring on fusion to the 6pi-cyclopentadienide ring. The anion is also a photochromic switch. Irradiation of the closed form 5 with visible light opens it to the open form 5', which reverts to the closed form 5 either with UV light or thermally. The switching behavior is between that of the parent 3/3' and the benzannelated system 4/4' and suggests that in its effect on the photoswitching, cyclopentadienide is behaving chemically similar to benzene.