Enhanced π‐Backdonation from Gold(I): Isolation of Original Carbonyl and Carbene Complexes

The specific electronic properties of bent o‐carborane diphosphine gold(I) fragments were exploited to obtain the first classical carbonyl complex of gold [(DPCb)AuCO]⁺ (ν(CO)=2143 cm^?1) and the diphenylcarbene complex [(DPCb)Au(CPh₂)]⁺, which is stabilized by the gold fragment rather than the carbene substituents. These two complexes were characterized by spectroscopic and crystallographic means. The [(DPCb)Au]⁺ fragment plays a major role in their stability, as substantiated by DFT calculations. The bending induced by the diphosphine ligand substantially enhances π‐backdonation and thereby allows the isolation of carbonyl and carbene complexes featuring significant π‐bond character.     

Photocatalytic Water Oxidation by a Pyrochlore Oxide upon Irradiation with Visible Light: Rhodium Substitution Into Yttrium Titanate

A stable visible‐light‐driven photocatalyst (λ≥450 nm) for water oxidation is reported. Rhodium substitution into the pyrochlore Y₂Ti₂O₇ is demonstrated by monitoring Vegard′s law evolution of the unit‐cell parameters with changing rhodium content, to a maximum content of 3 % dopant. Substitution renders the solid solutions visible‐light active. The overall rate of oxygen evolution is comparable to WO₃ but with superior light‐harvesting and surface‐area‐normalized turnover rates, making Y₂Ti_1.94Rh_0.06O₇ an excellent candidate for use in a Z‐scheme water‐splitting system.     

Investigation of Growth Conditions for the Expansion of Porcine Mesenchymal Stem Cells on Microcarriers in Stirred Cultures

The extensive use of mesenchymal stem cells (MCS) in tissue engineering and cell therapy increases the necessity to improve their expansion. Among these, porcine MCS are valuable models for tissue engineering and are classically expanded in static T-flasks. In this work, different processes of stirred cultures were evaluated and compared. First, the effect of glucose, glutamine, antioxidant, and growth factors concentrations on porcine MSC expansion were analyzed in a suitable medium by performing kinetic studies. Results showed that a lower glucose concentration (5.5 mM) enabled to increase maximal cell concentration by 40 % compared with a higher one (25 mM), while addition of 2 to 6 mM of glutamine increased maximal cell concentration by more than 25 % compared with no glutamine supplementation. Moreover, supplementation with 1 μM thioctic acid increased maximal cell concentration by 40 % compared with no supplementation. Using this adapted medium, microcarriers cultures were performed and compared with T-flasks expansion. Porcine MSC were shown to be able to proliferate on the five types of microcarriers tested. Moreover, cultures on Cytodex 1, Cytopore 2, and Cultispher G exhibited a MSC growth rate more than 40 % higher compared with expansion in T-flasks, while MSC metabolism was similar.     

Polyesters by a Radical Pathway: Rationalization of the Cyclic Ketene Acetal Efficiency

Radical ring-opening polymerization (rROP) of cyclic ketene acetals (CKAs) combines the advantages of both ring-opening polymerization and radical polymerization thereby allowing the robust production of polyesters coupled with the mild polymerization conditions of a radical process. rROP was recently rejuvenated by the possibility to copolymerize CKAs with classic vinyl monomers leading to the insertion of cleavable functionality into a vinyl-based copolymer backbone and thus imparting (bio)degradability. Such materials are suitable for a large scope of applications, particularly within the biomedical field. The competition between the ring-opening and ring-retaining propagation routes is a major complication in the development of efficient CKA monomers, ultimately leading to the use of only four monomers that are known to completely ring-open under all experimental conditions. In this article we investigate the radical ring-opening polymerization of model CKA monomers and demonstrate by the combination of DFT calculations and kinetic modeling using PREDICI software that we are now able to predict in silico the ring-opening ability of CKA monomers.     

Gold(III) π-Allyl Complexes

Gold(III) π-complexes have been authenticated recently with alkenes, alkynes, and arenes. The key importance of Pd^II π-allyl complexes in organometallic chemistry (Tsuji–Trost reaction) prompted us to explore gold(III) π-allyl complexes, which have remained elusive so far. The (P,C)Au^III(allyl) and (methallyl) complexes 3 and 3′ were readily prepared and isolated as thermally and air-stable solids. Spectroscopic and crystallographic analyses combined with detailed DFT calculations support tight quasi-symmetric η³-coordination of the allyl moiety. The π-allyl gold(III) complexes are activated towards nucleophilic additions, as substantiated with β-diketo enolates.     

Synthesis of a C(sp2)-bridged Phosphine-Borane by Ionic Coupling

The vinyl carbenoid H₂C=CBr(Li) has been used as key precursor to prepare a geminal C(sp²)-bridged phosphine-borane. Starting from bromoethene, two sequences of lithiation/electrophilic trapping, with ClPiPr₂ and FBMes₂ respectively, affords iPr₂P–C(=CH₂)–BMes₂ 3 [Mes = 2,4,6-(H₃C)₃C₆H₂]. This new phosphine-borane 3 was characterized by multi-nuclear NMR and mass spectroscopy. It adopts a monomeric open structure without P→B interaction. A few crystals of a secondary product 4 were analyzed by X-ray diffraction, revealing an unusual dimeric structure.     

Terminal Alkyne Coupling Reactions Through a Ring: Effect of Ring Size on Rate and Regioselectivity

Terminal alkyne coupling reactions promoted by rhodium(I) complexes of macrocyclic NHC-based pincer ligands—which feature dodecamethylene, tetradecamethylene or hexadecamethylene wingtip linkers viz. [Rh(CNC-n)(C₂H₄)][BAr^F₄] (n=12, 14, 16; Ar^F=3,5-(CF₃)₂C₆H₃)—have been investigated, using the bulky alkynes HC≡CtBu and HC≡CAr’ (Ar’=3,5-tBu₂C₆H₃) as substrates. These stoichiometric reactions proceed with formation of rhodium(III) alkynyl alkenyl derivatives and produce rhodium(I) complexes of conjugated 1,3-enynes by C−C bond reductive elimination through the annulus of the ancillary ligand. The intermediates are formed with orthogonal regioselectivity, with E-alkenyl complexes derived from HC≡CtBu and gem-alkenyl complexes derived from HC≡CAr’, and the reductive elimination step is appreciably affected by the ring size of the macrocycle. For the homocoupling of HC≡CtBu, E-tBuC≡CCH=CHtBu is produced via direct reductive elimination from the corresponding rhodium(III) alkynyl E-alkenyl derivatives with increasing efficacy as the ring is expanded. In contrast, direct reductive elimination of Ar'C≡CC(=CH₂)Ar’ is encumbered relative to head-to-head coupling of HC≡CAr’ and it is only with the largest macrocyclic ligand studied that the two processes are competitive. These results showcase how macrocyclic ligands can be used to interrogate the mechanism and tune the outcome of terminal alkyne coupling reactions, and are discussed with reference to catalytic reactions mediated by the acyclic homologue [Rh(CNC-Me)(C₂H₄)][BAr^F₄] and solvent effects.     

A Convergent Total Synthesis of the Death Cap Toxin α‐Amanitin

The toxic bicyclic octapeptide α‐amanitin is mostly found in different species of the mushroom genus Amanita, with the death cap (Amanita phalloides) as one of the most prominent members. Due to its high selective inhibition of RNA polymerase II, which is directly linked to its high toxicity, particularly to hepatocytes, α‐amanitin received an increased attention as a toxin‐component of antibody‐drug conjugates (ADC) in cancer research. Furthermore, the isolation of α‐amanitin from mushrooms as the sole source severely restricts compound supply as well as further investigations, as structure–activity relationship (SAR) studies. Based on a straightforward access to the non‐proteinogenic amino acid dihydroxyisoleucine, we herein present a robust total synthesis of α‐amanitin providing options for production at larger scale as well as future structural diversifications.     

Polylactones 27. Anionic polymerization of L-lactide. Variation of endgroups and synthesis of block copolymers with poly(ethylene oxide)

L-Lactide was polymerized in toluene with various alkoxide initiators. These initiators were prepared in situ from potassium t.-butoxide and primary or secondary alcohols such as tetradecanol, diethylene glycol butyl ether, menthol or testosteron. All these alcohols were incorporated as ester endgroups into the polylactide chain. However ¹H-NMR spectroscopy proves the existence of more OH-endgroup than ester endgroups. This finding and 10–20% racemization observed for all anionic polymerizations suggest that chain-transfer reactions with the monomer via deprotonation take place. When poly(ethylene glycol) monomethyl ether in combination with KOtBu was used as initiator, twoblock copolymers were obtained. With poly(ethylene glycol) A-B-A-triblock copolymers could be synthesized. The quantitative reaction of the poly(ethylene glycol)s with L-lactide could be proven by both ¹H NMR spectroscopy and gelpermeation chromatography. DSC-measurements show that depending on their lengths either the polylactide or the poly(ethylene oxide)blocks can crystallize. Due to partial racemization the melting temperatures (T_m) of the poly(L-lactide) blocks did not exceed 155°C.     

Machine-Learned Free Energy Surfaces for Capillary Condensation and Evaporation in Mesopores

Using molecular simulations, we study the processes of capillary condensation and capillary evaporation in model mesopores. To determine the phase transition pathway, as well as the corresponding free energy profile, we carry out enhanced sampling molecular simulations using entropy as a reaction coordinate to map the onset of order during the condensation process and of disorder during the evaporation process. The structural analysis shows the role played by intermediate states, characterized by the onset of capillary liquid bridges and bubbles. We also analyze the dependence of the free energy barrier on the pore width. Furthermore, we propose a method to build a machine learning model for the prediction of the free energy surfaces underlying capillary phase transition processes in mesopores.