Localized electropolymerization on oxidized boron-doped diamond electrodes modified with pyrrolyl units

This paper describes the functionalization of oxidized boron-doped diamond (BDD) electrodes with N-(3-trimethoxysilylpropyl)pyrrole (TMPP) and the influence of this layer on the electrochemical transfer kinetics as well as on the possibility of forming strongly adhesive polypyrrole films on the BDD interface through electropolymerization. Furthermore, localized polymer formation was achieved on the TMPP-modified BDD interface using the direct mode of a scanning electrochemical microscope (SECM) as well as an electrochemical scanning near-field optical microscope (E-SNOM). Depending on the method used polypyrrole dots with diameters in the range of 1-250 microm are electrogenerated.     

The adsorption of dyes used in the textile industry on mesoporous materials

An adsorbent material made with a silica lamellar mesoporous material treated with chitosan has been proved to be useful to adsorb both anionic and cationic dyes used in the textile industry. The two tested dyes Tectilon Blue (anionic) and Rhodamine B (cationic) have different adsorption kinetics reflecting a complex mechanism of the phenomenon. Furthermore, the adsorption capacity and interaction strength of Tectilon Blue is higher than those of Rhodamine B. Tectilon Blue molecules are situated with the molecular plane perpendicular to the adsorbent surface, whilst that of the Rhodamine B molecule is flat and parallel to the surface. The differences may be attributed to the different regions of the adsorbent surface on which the dyes are adsorbed because of their different electric charge.     

Determination of manganese and zinc in powdered chocolate samples by slurry sampling using sequential multi-element flame atomic absorption spectrometry

In the present work, a slurry sampling flame atomic absorption spectrometric method to determine directly manganese and zinc in powdered chocolate samples is proposed. The optimization step was performed using univariate methodology involving the following factors: nature and concentration of the acid solution, sonication time, and particle size. The established conditions led to the use of a sample mass of 150 mg, 2.0 mol L^− 1 nitric acid solution, sonication time of 15 min, and a slurry volume of 50 mL. This method allows the determination of manganese and zinc with detection limit of 52 and 61 ng g^− 1, respectively, and a precision expressed as relative standard deviation (RSD) of 2.6% and 3.2% (both, n = 10) for contents of manganese and zinc of 52.4 and 100.0 μg g^− 1, respectively. The proposed method was applied for determination of manganese and zinc in five powdered chocolate samples. In these, the manganese content varied from 42.8 to 52.7 and from 88.6 to 102.4 μg g^− 1 of zinc. The analytical results were compared with the results obtained by analysis of these samples after digestion using open vessel and acid bomb digestion procedures and determination using FS-FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.     

Determination of benzimidazole fungicides in soil samples using microwave-assisted micellar extraction and liquid chromatography with fluorescence detection

A simple and fast analytical method was developed for the determination of benzimidazole fungicides (benomyl, carbendazim, thiabendazole, and fuberidazole) in soil samples. The analytes were extracted from the soil samples by means of conventional microwave-assisted extraction, using the non-ionic surfactants polyoxyethylene 10 lauryl ether (POLE) and oligoethylene glycol monooalkyl ether (Genapol X-080) as extractants. Determinations were made by using liquid chromatography with direct fluorescence detection. The use of an analytical column Symmetry C-18 offered short retention times of analytes without the need of any pH regulators with mobile phase methanol-water (50 + 50, v/v). The best results were obtained using 5% (v/v) POLE as extractant with recoveries of the fungicides in spiked soil samples between 71 and 105%. The results were compared with those obtained when Soxhlet extraction was applied to the same soil samples.     

QSAR modeling with the electrotopological state indices: Corticosteroids

A structure-activity analysis of a series of steroids binding to corticosteroid-binding globulin was made using the electrotopological state index for each atom in the molecule. Two indices were found to correlate well with the binding affinity. The indices encode structural characteristics in the A and the D rings of the steroids in the study. One of the indices was formulated as the difference between two indices in the A ring. The two were not intercorrelated, suggesting that the composite index signals the influence of structure changes in or near the A ring that can be monitored by the composite index. This is a new observation using this structure-activity method. It is suggested that this model makes some contributions towards detection of the pharmacophore.     

Trace determination of sulfonylurea herbicides in water and grape samples by capillary zone electrophoresis using large volume sample stacking

A sensitive and reliable method using capillary zone electrophoresis with UV-diode array detection has been developed and validated for trace determination of residues of sulfonylurea herbicides in environmental water samples and grapes from different origins. The analytes included are triasulfuron, rimsulfuron, flazasulfuron, metsulfuron-methyl, and chlorsulfuron. Optimum separation has been achieved on a 48.5-cm × 50-μm (effective length 40 cm) bubble cell capillary using 90 mM ammonium acetate buffer, pH 4.8, by applying a voltage of 20 kV at 25 °C and using p-aminobenzoic acid as the internal standard. In order to increase sensitivity, large volume sample stacking with polarity switching has been applied as on-line preconcentration methodology. For water samples, a solid-phase extraction (SPE) procedure based on the use of Oasis HLB cartridges was applied for off-line preconcentration and cleanup. For grape samples, the SPE procedure was achieved with C₁₈ sorbent, after extraction of the compounds with MeOH:H₂O (1:1) by sonication. The limits of detection for the studied compounds were between 0.04 and 0.12 μg/L for water samples and 0.97 and 8.30 μg/kg in the case of grape samples, lower in all cases than the maximum residue limits permitted by the EU for this kind of food. The developed methodology has demonstrated its suitability for the monitoring of these residues in environmental water and grape samples with high sensitivity, precision, and satisfactory recoveries.     

New method for determination of trihalomethanes in exhaled breath: Applications to swimming pool and bath environments

A method for the estimation of the human intake of trihalomethanes (THMs), namely chloroform, bromodichloromethane, dibromochloromethane and bromoform, during showering and bathing is reported. The method is based on the determination of these compounds in exhaled breath that is collected by solid adsorption on Tenax using a device specifically designed for this purpose. Instrumental measurements were performed by automatic thermal desorption coupled to gas chromatography with electron capture detection. THMs in exhaled breath samples were determined during showering and swimming pool attendance. The levels of these compounds in indoor air and water were also determined as reference for interpretation of the exhaled breath results. The THM concentrations in exhaled breath of the volunteers measured before the exposure experiments showed a close correspondence with the THMs levels in indoor air where the sampler was located. Limits of detection in exhaled breath were dependent on THM analytes and experimental sites. They ranged between 170 and 710 ng m⁻³ in the swimming pool studies and between 97 and 460 ng m⁻³ in the showering studies. Application of this method to THMs determination during showering and swimming pool activities revealed statistically significant increases in THMs concentrations when comparing exhaled breath before and after exposure.     

Extending the GC-SAFT-VR approach to associating functional groups: Alcohols, aldehydes, amines and carboxylic acids

The statistical associating fluid theory is a widely used molecular-based equation of state that has been successfully applied to study a broad range of fluid systems. It provides a framework in which the effects of molecular shape and interactions on the thermodynamics and phase behavior of fluids can be separated and quantified. In the original approach, molecules were modeled as chains composed of identical segments; the heterogeneity of molecules in terms of structure and functional groups was described implicitly through effective parameters. To overcome this limitation, in recent works [Peng et al. Fluid Phase Equilib. 227(2), 131 (2009); Ind. Eng. Chem. Res. 49(3), 1378 (2010)] the GC-SAFT-VR approach has been developed to extend the theory to model chains composed of segments of different size and/or energy of interaction and enable the development of a group-contribution approach within the SAFT-VR framework in which molecular heterogeneity and connectivity is explicitly accounted for. The parameters for several key functional groups (CH₃, CH₂, CH, CH₂CH, CO, C₆H₅, esters, ethers, cis-alkenes and trans-alkenes groups) were determined by fitting to experimental vapor pressure and saturated liquid density data for a number of small molecules containing the functional groups of interest and transferability of the parameters tested by comparing the theoretical predictions with experimental data for pure fluids not included in the fitting process and binary mixtures of both simple fluids and the VLE and LLE of small molecules in polymer systems. In this work, we further extend the applicability of the GC-SAFT-VR approach through the study of the vapor-liquid phase behavior of associating systems, such as linear and branched alcohols, primary and secondary amines, aldehydes, and carboxylic acids, and their mixtures. In the study of these new molecules several new functional groups (OH (linear and branched), HCO, NH₂, NH and COOH) are defined and their molecular parameters characterized. The transferability of the parameters is again tested by comparing the theoretical predictions with experimental data for pure fluids and binary mixtures not included in the fitting process. The GC-SAFT-VR approach is found to predict the phase behavior of the systems studied in most cases in good agreement with experimental data and accurately captures the effects of changes in structure and molecular composition on phase behavior.     

Analysis of chiral amino acids in cerebrospinal fluid samples linked to different stages of Alzheimer disease

Chiral micellar electrokinetic chromatography with laser-induced fluorescence detection (chiral-MEKC-LIF) was used to investigate D- and L-amino acid contents in cerebrospinal fluid (CSF) samples related to different Alzheimer disease (AD) stages. CSF samples were taken from (i) control subjects (S1 pool), (ii) subjects showing a mild cognitive impairment who remained stable (S2 pool), (iii) subjects showing an mild cognitive impairment that progressed to AD (S3 pool) and (iv) subjects diagnosed with AD (S4 pool). The optimized procedure only needed 10 μL of CSF and it included sample cleaning, derivatization with FITC and chiral-MEKC-LIF separation. Eighteen standard amino acids were baseline separated with efficiencies up to 703,000 plates/m, high sensitivity (LODs in the nM range) and good resolution (values ranging from 2.6 to 9.5). Using this method, L-Arg, L-Leu, L-Gln, γ-aminobutyric acid, L-Ser, D-Ser, L-Ala, Gly, L-Lys, L-Glu and L-Asp were detected in all the CSF samples. S3 and S4 samples (i.e. AD subjects) showed significant lower amounts of L-Arg L-Lys, L-Glu and L-Asp compared to the non-AD S1 and S2 samples, showing in the S4 group the lowest amounts of L-Arg L-Lys, L-Glu and L-Asp. Moreover, γ-aminobutyric acid was significantly higher in AD subjects with the highest amount also found for S4. No significant differences were observed for the rest of amino acids including D-Ser. Based on the obtained chiral-MEKC-LIF data, it was possible to correctly classify all the samples into the four groups. These results demonstrate that the use of enantioselective procedures as the one developed in this work can provide some new light on the investigations of AD, including the discovery of new biomarkers related to different stages of AD.