Evaluation of different rhodium modifiers and coatings on the simultaneous determination of As, Bi, Pb, Sb, Se and of Co, Cr, Cu, Fe, Mn in milk by electrothermal atomic absorption spectrometry

Different kinds of modifiers and coatings on the integrated platform of transversely heated graphite atomizer (THGA) have been tested for the simultaneous determination of two group of elements: the first, the more volatile, formed by arsenic, bismuth, lead, antimony and selenium; the second, the less volatile, formed by cobalt, chromium, cupper, iron and manganese in milk by electrothermal atomic absorption spectrometry. Different Rh-modifiers were studied, such as Rh-coated platforms (Rh), carbide plus rhodium coated platforms (W-Rh, Zr-Rh), carbide-coated platforms (W and Zr) with co-injection of RhCl₃, solutions and uncoated platforms with injection of solutions of Pd(NO₃)₂, Mg(NO₃)₂, and RhCl₃. Milk samples were diluted 1:10 in 1.0% HNO₃ and injected into the tube. The mass of modifier deposited and co-injected in the tube and the use of end capped tubes were also evaluated in order to improve the electrothermal behavior of analytes. Integrated platform pretreated with W plus co-injection RhCl₃ for first group and pretreated with W-Rh for second group were elected. For 20 μL injected samples the analytical curves in the 5.0–20.0 μg L⁻¹ concentration range have good linear correlation coefficients (r > 0.998). Relative standard deviations (n = 12) are <6% and the calculated characteristic masses are between 5 pg and 62 pg. Correspondence: Gian Paulo G. Freschi, Faculdade de Ciências Exatas e Tecnologia, Universidade Federal da Grande Dourados, PO Box 332, 79.804-970, Dourados-MS, Brazil; Instituto de Química, Universidade Estadual Paulista, PO Box 355, 14801-970 Araraquara-SP, Brazil     

Solution Chemistry of Arsenic Anions in the Presence of Metal Cations

The interaction of arsenic(V) and arsenic(III) oxyanions with metal cations was investigated by potentiometry under temperature and ionic strength conditions approaching those prevailing in natural waters. The selection includes the major metal cations and some other ions of high environmental relevance. Ionic pairs [M(As^VO₄)]^?, [M(HAs^VO₄)] and [M(H₂As^IIIO₃)]⁺ formation is suggested for all +2 metal cations, based on the potentiometric results. These ion-pairs between arsenic anions and other metal cations are hardly ever mentioned or taken into account when arsenic speciation in natural waters is considered. These results provide the basis for studying arsenic speciation in natural aquatic systems, on which environmental fate, bioavailability and toxicity of the element depend. Some extrapolations to the conditions of the natural waters are presented as well as some insights into the adsorption process onto hydrous oxides.     

Plasmon heating mediated Friedel-Crafts alkylation of anisole using supported AuNP@Nb2O5 catalysts

Two different hybrid materials composed of gold nanoparticles (AuNPs) supported on either commercial niobium oxide HY 340 or mesoporous niobium oxide catalyzed the Friedel-Crafts alkylation of anisole by benzyl chloride. Excitation of the surface plasmon of the supported AuNPs allowed the reaction to occur at lower temperatures by acting as an alternative heat source. The localized heating produced via plasmon excitation permitted the acid catalyzed reaction to occur - at the Lewis acid sites on the Nb₂O₅ support - at 80 °C while thermal-dark reactions using a conventional heat source, required temperatures of 120 °C or higher. The catalytic activity of the tested hybrid materials decreased with storage time. However, the deactivation showed to be reversible upon lyophilisation indicating that the nature of the deactivation could be due to water adsorption.     

Determination of total arsenic in seawater by hydride generation atomic fluorescence spectrometry

In this work, the determination of total As in seawater by hydride generation atomic fluorescence spectrometry was studied. The influence of the chemical, flow and instrumental parameters were investigated and optimized. The pre-reduction of As(V) to As(III) was performed using KI plus ascorbic acid in 3.5 mol L^− 1 HCl medium. No multiplicative interference was present and external aqueous calibration could be used. The limit of detection was 36 ng L^− 1, while the repeatability was 2% (n = 10), at a 500 ng L^− 1 concentration level. The sample throughput was 15 h^− 1 if triplicate measurements were made. The accuracy was assessed by the analysis of a seawater certified reference material and excellent agreement between the obtained and certified values was verified. The procedure was used for the analysis of seawater offshore samples collected at the Brazilian coast and results ranging from 860 to 1200 ng L^− 1 were found.     

Ethanol Production from Sugarcane Bagasse by Zymomonas mobilis Using Simultaneous Saccharification and Fermentation (SSF) Process

Considerable efforts have been made to utilize agricultural and forest residues as biomass feedstock for the production of second-generation bioethanol as an alternative fuel. Fermentation utilizing strains of Zymomonas mobilis and the use of simultaneous saccharification and fermentation (SSF) process has been proposed. Statistical experimental design was used to optimize the conditions of SSF, evaluating solid content, enzymatic load, and cell concentration. The optimum conditions were found to be solid content (30%), enzymatic load (25 filter paper units/g), and cell concentration (4 g/L), resulting in a maximum ethanol concentration of 60 g/L and a volumetric productivity of 1.5 g L^?1?h^?1.     

Trace determination of sulfonylurea herbicides in water and grape samples by capillary zone electrophoresis using large volume sample stacking

A sensitive and reliable method using capillary zone electrophoresis with UV-diode array detection has been developed and validated for trace determination of residues of sulfonylurea herbicides in environmental water samples and grapes from different origins. The analytes included are triasulfuron, rimsulfuron, flazasulfuron, metsulfuron-methyl, and chlorsulfuron. Optimum separation has been achieved on a 48.5-cm × 50-μm (effective length 40 cm) bubble cell capillary using 90 mM ammonium acetate buffer, pH 4.8, by applying a voltage of 20 kV at 25 °C and using p-aminobenzoic acid as the internal standard. In order to increase sensitivity, large volume sample stacking with polarity switching has been applied as on-line preconcentration methodology. For water samples, a solid-phase extraction (SPE) procedure based on the use of Oasis HLB cartridges was applied for off-line preconcentration and cleanup. For grape samples, the SPE procedure was achieved with C₁₈ sorbent, after extraction of the compounds with MeOH:H₂O (1:1) by sonication. The limits of detection for the studied compounds were between 0.04 and 0.12 μg/L for water samples and 0.97 and 8.30 μg/kg in the case of grape samples, lower in all cases than the maximum residue limits permitted by the EU for this kind of food. The developed methodology has demonstrated its suitability for the monitoring of these residues in environmental water and grape samples with high sensitivity, precision, and satisfactory recoveries.     

Metabolic probes for imaging endosymbiotic bacteria within toxic dinoflagellates

Fluorescence microscopy offers an important tool for the study of complex biological phenomena such as symbiosis. Here we identify a strategy that adapts the unique differences between the secondary metabolism in host and guest symbiotic species to selectively image endosymbiotic organisms. The method is demonstrated by application to the complex symbiotic relationships in toxic marine dinoflagellates.     

Solvent- and temperature-dependent functionalisation of enantioenriched aziridines

A highly stereo‐ and regioselective functionalisation of chiral non‐racemic aziridines is reported. By starting from a parent enantioenriched aziridine and finely tuning the reaction conditions, it is possible to address the regio‐ and stereoselectivity of the lithiation/electrophile trapping sequence, thereby allowing the preparation of highly enantioenriched functionalised aziridines. From chiral N‐alkyl trans‐2,3‐diphenylaziridines (S,S)‐ 1 a , b , two differently configured chiral aziridinyllithiums could be generated (trans‐ 1 a , b‐Li in toluene and cis‐ 1 a , b‐Li in THF), thus disclosing a solvent‐dependent reactivity that is useful for the synthesis of chiral tri‐substituted aziridines with different stereochemistry. In contrast, chiral aziridine (S,S)‐ 1 c showed a temperature‐dependent reactivity to give chiral ortho‐lithiated aziridine 1 c‐ ortho ‐Li at ?78 °C and α‐lithiated aziridine 1 c‐α‐Li at 0 °C. Both lithiated intermediates react with electrophiles to give enantioenriched ortho‐ and α‐functionalised aziridines. The reaction of all the lithiated aziridines with carbonyl compounds furnished useful chiral hydroxyalkylated derivatives, the stereochemistry of which was ascertained by X‐ray and NMR spectroscopic analysis. The usefulness of chiral non‐racemic functionalised aziridines has been demonstrated by reductive ring‐opening reactions furnishing chiral amines that bear quaternary stereogenic centres and chiral 1,2‐, 1,3‐ and 1,5‐aminoalcohols. It is remarkable that the solvent‐dependent reactivity observed with (S,S)‐ 1 a , b permits the preparation of both the enantiomers of amines ( 11 and ent‐ 11 ) and 1,2‐aminoalcohols ( 13 and ent‐ 13 ) starting from the same parent aziridine. Interestingly, for the first time, a configurationally stable chiral α‐lithiated aziridine ( 1 c‐α‐Li ) has been generated at 0 °C. In addition, ortho‐hydroxyalkylated aziridines have been easily converted into chiral aminoalkyl phthalans, which are useful building blocks in medicinal chemistry.