New method for determination of trihalomethanes in exhaled breath: Applications to swimming pool and bath environments

A method for the estimation of the human intake of trihalomethanes (THMs), namely chloroform, bromodichloromethane, dibromochloromethane and bromoform, during showering and bathing is reported. The method is based on the determination of these compounds in exhaled breath that is collected by solid adsorption on Tenax using a device specifically designed for this purpose. Instrumental measurements were performed by automatic thermal desorption coupled to gas chromatography with electron capture detection. THMs in exhaled breath samples were determined during showering and swimming pool attendance. The levels of these compounds in indoor air and water were also determined as reference for interpretation of the exhaled breath results. The THM concentrations in exhaled breath of the volunteers measured before the exposure experiments showed a close correspondence with the THMs levels in indoor air where the sampler was located. Limits of detection in exhaled breath were dependent on THM analytes and experimental sites. They ranged between 170 and 710 ng m⁻³ in the swimming pool studies and between 97 and 460 ng m⁻³ in the showering studies. Application of this method to THMs determination during showering and swimming pool activities revealed statistically significant increases in THMs concentrations when comparing exhaled breath before and after exposure.     

Trace determination of sulfonylurea herbicides in water and grape samples by capillary zone electrophoresis using large volume sample stacking

A sensitive and reliable method using capillary zone electrophoresis with UV-diode array detection has been developed and validated for trace determination of residues of sulfonylurea herbicides in environmental water samples and grapes from different origins. The analytes included are triasulfuron, rimsulfuron, flazasulfuron, metsulfuron-methyl, and chlorsulfuron. Optimum separation has been achieved on a 48.5-cm × 50-μm (effective length 40 cm) bubble cell capillary using 90 mM ammonium acetate buffer, pH 4.8, by applying a voltage of 20 kV at 25 °C and using p-aminobenzoic acid as the internal standard. In order to increase sensitivity, large volume sample stacking with polarity switching has been applied as on-line preconcentration methodology. For water samples, a solid-phase extraction (SPE) procedure based on the use of Oasis HLB cartridges was applied for off-line preconcentration and cleanup. For grape samples, the SPE procedure was achieved with C₁₈ sorbent, after extraction of the compounds with MeOH:H₂O (1:1) by sonication. The limits of detection for the studied compounds were between 0.04 and 0.12 μg/L for water samples and 0.97 and 8.30 μg/kg in the case of grape samples, lower in all cases than the maximum residue limits permitted by the EU for this kind of food. The developed methodology has demonstrated its suitability for the monitoring of these residues in environmental water and grape samples with high sensitivity, precision, and satisfactory recoveries.     

Copper(II), cobalt(II), and nickel(II) complexes with a bulky anthracene-based carboxylic ligand: syntheses, crystal structures, and magnetic properties

To systematically explore the influence of the bulky aromatic ring skeleton with a large conjugated pi-system on the structures and properties of their complexes, six CuII, CoII, and NiII complexes with the anthracene-based carboxylic ligand anthracene-9-carboxylic acid (HL1), were synthesized and characterized, sometimes incorporating different auxiliary ligands: [Cu2(L1)4(CH3OH)2](CH3OH) (1), [Cu4(L1)6(L2)4](NO3)2(H2O)2 (2), {[Cu2(L1)4(L3)](CH3OH)0.25}infinity (3), [Co2(L1)4(L4)2(micro-H2O)](CH3OH) (4), {[Co(L1)2(L5)(CH3OH)2]}infinity (5), and {[Ni(L1)2(L5)(CH3OH)2]}infinity (6) (L2 = 2,2'-bipyridine, L3 = 1,4-diazabicyclo[2.2.2]octane, L4 = 1,10-phenanthroline, and L5 = 4,4'-bipyridine). 1 has a dinuclear structure that is further assembled to form a one-dimensional (1D) chain and then a two-dimensional (2D) network by the C-H...O H-bonding and pi...pi stacking interactions jointly. 2 takes a tetranuclear structure due to the existence of the chelating L2 ligand. 3 possesses a 1D chain structure by incorporating the related auxiliary ligand L3, which is further interlinked via interchain pi...pi stacking, resulting in a three-dimensional (3D) network. 4 also has a dinuclear structure and then forms a higher-dimensional supramolecular network through intermolecular pi...pi stacking and/or C-H...pi interactions. 5 and 6 are isostructural complexes, except they involve different metal ions, showing 1D chain structures, which are also assembled into 2D networks from the different crystallographic directions by interchain pi...pi stacking and C-H...pi interactions, respectively. The results reveal that the steric bulk of the anthracene ring in HL1 plays an important role in the formation of 1-6. The magnetic properties of the complexes were investigated, and the very long intermetallic distances result in weak magnetic coupling, with the exception of 1 and 3, which adopt the typical paddle-wheel structure of copper acetate and are thus strongly coupled.     

Reactivity of conjugated and unconjugated pterins with singlet oxygen (O2(1Deltag)): physical quenching and chemical reaction

Pterins (PTs) belong to a class of heterocyclic compounds present in a wide range of living systems. They participate in relevant biological functions and are involved in different photobiological processes. We have investigated the reactivity of conjugated PTs (folic acid [FA], 10-methylfolic acid [MFA], pteroic acid [PA]) and unconjugated PTs (PT, 6-hydroxymethylpterin [HPT], 6-methylpterin [MPT], 6,7-dimethylpterin [DPT], rhamnopterin [RPT]) with singlet oxygen (1O2) in aqueous solutions, and compared the efficiencies of chemical reaction and physical quenching. The chemical reactions between 1O2, produced by photosensitization, and PT derivatives were followed by UV-visible spectrophotometry and high-performance liquid chromatography, and corresponding rate constants (k(r)) were evaluated. Whenever possible, products were identified and quantified. Rate constants of 1O2 total quenching by the PT derivatives investigated were obtained from steady-state 1O2 luminescence measurements. Results show that the behavior of conjugated PTs differs considerably from that of unconjugated derivatives, and the mechanisms of 1O2 physical quenching by these compounds and of their chemical reaction with 1O2 are discussed in relation to their structural features.     

Three lanthanide complexes with mixed salicylate and 1,10-phenanthroline: syntheses,crystal structures,and luminescent/magnetic properties

Three new lanthanide complexes incorporating salicylate (HSA or SA) and 1,10-phenanthroline (phen), Ln₃(HSA)₅(SA)₂(phen)₃ [Ln = Ho (1) and Er (2)], and Sm₂(HSA)₂(SA)₂(phen)₃ (3), have been synthesized. X-ray structural analysis reveals that 1 and 2 are isostructural with a trinuclear pattern, and 3 exhibits a binuclear structure. Comparison of the structural differences between 1/2 and 3 suggests that the identity of metal plays an important role in construction of such complexes. The magnetic properties of 1 are discussed. Moreover, 2 and 3 are both photoluminescent materials, and their emission properties are closely related to their corresponding Ln^III centers.     

Structural refinement of Nd[Fe(CN)6]·4H2O and study of NdFeO3 obtained by its oxidative thermal decomposition at very low temperatures

The crystal structure of Nd[Fe(CN)₆]·4H₂O has been refined by Rietveld analysis using high resolution synchrotron powder X-ray diffraction data. It belonged to the orthorhombic crystal system, Cmcm space group, with cell parameters: , and . The change in space group from P6₃/m which is observed in the pentahydrates (LnFe(CN)₆·5H₂O) to Cmcm in the tetrahydrates has been analyzed to be a consequence of the change in 9-fold coordination of Nd³⁺ in the pentahydrates to 8-fold coordination in the tetrahydrates, which changes the Nd³⁺ environment from tricapped trigonal prism to a distorted tricapped trigonal prism or square antiprism. Its decomposition process in air to produce NdFeO₃ has been followed by thermogravimetric and differential thermal analysis, IR spectroscopy and laboratory powder XRD. We found that it is possible to synthesize crystalline NdFeO₃ at temperatures as low as 380 °C and refine the structure of single phase crystalline NdFeO₃ synthesized by this method at 600 °C.