Immunosensor for Detection of the Textile Dye Disperse Orange 1 Based on Non‐conventional Competitive Assay

Textile dyes appear as an important class of compounds that has become a matter of public concern and a serious challenge for scientists and environmentalists due to their large‐scale production and extensive application. In this work, a non‐conventional competitive‐type amperometric immunosensor was successfully developed for detection of the textile dye Disperse Orange 1 (DO1). The DO1 was magnetically captured and separated from the sample solution using magnetic particles (MP) functionalized with the antibody anti‐DO1 and with HRP and gold electrodes were modified with the conjugate DO1‐BSA. Molecules of DO1 immobilized on the electrode surface and DO1 captured by MP compete for antibody binding sites. As a result, the amperometric signal decreases with increasing target DO1 concentration at the capture step, because this decreases, the attachment between the HRP coated MP and the electrode. This strategy allowed us to determine DO1 at the low detection limit of 0.87 ng mL^?1 with great specificity. Also, there were good recoveries for detection of the textile dye in river water samples without the need of sample pre‐treatment. The competitive amperometric immunosensor shows applicability for the determination of small molecules that cannot be determined by conventional competitive or sandwich immunosensors.     

Chondroitin Sulfate Protects the Liver in an Experimental Model of Extra-Hepatic Cholestasis Induced by Common Bile Duct Ligation

During liver fibrogenesis, there is an imbalance between regeneration and wound healing. The current treatment is the withdrawal of the causing agent; thus, investigation of new and effective treatments is important. Studies have highlighted the action of chondroitin sulfate (CS) in different cells; thus, our aim was to analyze its effect on an experimental model of bile duct ligation (BDL). Adult Wistar rats were subjected to BDL and treated with CS for 7, 14, 21, or 28 days intraperitoneally. We performed histomorphometric analyses on Picrosirius-stained liver sections. Cell death was analyzed according to caspase-3 and cathepsin B activity and using a TUNEL assay. Regeneration was evaluated using PCNA immunohistochemistry. BDL led to increased collagen content with corresponding decreased liver parenchyma. CS treatment reduced total collagen and increased parenchyma content after 21 and 28 days. The treatment also promoted changes in the hepatic collagen type III/I ratio. Furthermore, it was observed that CS treatment reduced caspase-3 activity and the percentage of TUNEL-positive cells after 14 days and cathepsin B activity only after 28 days. The regeneration increased after 14, 21, and 28 days of CS treatment. In conclusion, our study showed a promising hepatoprotective action of CS in fibrogenesis induced by BDL.     

Structure Elucidation of Triterpenoid Saponins Found in an Immunoadjuvant Preparation of Quillaja brasiliensis Using Mass Spectrometry and 1H and 13C NMR Spectroscopy

An immunoadjuvant preparation (named Fraction B) was obtained from the aqueous extract of Quillaja brasiliensis leaves, and further fractionated by consecutive separations with silica flash MPLC and reverse phase HPLC. Two compounds were isolated, and their structures elucidated using a combination of NMR spectroscopy and mass spectrometry. One of these compounds is a previously undescribed triterpene saponin (Qb1), which is an isomer of QS-21, the unique adjuvant saponin employed in human vaccines. The other compound is a triterpene saponin previously isolated from Quillaja saponaria bark, known as S13. The structure of Qb1 consists of a quillaic acid residue substituted with a β-d-Galp-(1→2)-[β-d-Xylp-(1→3)]-β-d-GlcpA trisaccharide at C3, and a β-d-Xylp-(1→4)-α-l-Rhap-(1→2)-[α-l-Arap-(1→3)]-β-d-Fucp moiety at C28. The oligosaccharide at C28 was further substituted at O4 of the fucosyl residue with an acyl group capped with a β-d-Xylp residue.     

Extraction of plasmid DNA from Escherichia coli cell lysate in a thermoseparating aqueous two-phase system

The primary purification of a 6.1 kilo base pair (kbp) plasmid from a desalted alkaline lysate has been accomplished by a thermoseparating aqueous two-phase system [(50% ethylene oxide-50% propylene oxide)-Dextran T 500]. The partitioning of the different nucleic acids (plasmid DNA, RNA, genomic DNA) in the thermoseparating aqueous two-phase system was followed both qualitatively by agarose gel electrophoresis and quantitatively by analytical chromatography (size exclusion- and anion-exchange mode) and PicoGreen fluorescence analysis. The experimental results showed a complete recovery of the plasmid DNA to the top phase, while 80% of total RNA and 58% of total protein was discarded to the bottom phase. Moreover, a 3.8-fold volume reduction of the plasmid DNA solution was achieved. By using a final thermoseparating step, the EO50PO50 polymer could be efficiently recycled, resulting in plasmid solution containing less than 1% polymer. The developed thermoseparating aqueous two-phase system shows great potential for the large-scale processing of plasmid DNA.     

A Theoretical Exploration of the Potential of ICAR ATRP for One‐ and Two‐Pot Synthesis of Well‐Defined Diblock Copolymers

Kinetic Monte Carlo simulations are performed to investigate the capability of ICAR ATRP for the synthesis of well‐defined poly(isobornyl acrylate‐b‐styrene) block(‐like) copolymers using one‐pot semi‐batch and two‐pot batch procedures. The block copolymer quality is quantified via a block deviation (〈BD〉) value. For 〈BD〉 values lower than 0.30, the quality is defined as good and for well‐chosen polymerization conditions the formation of homopolymer chains upon addition of the second monomer can be suppressed. A better block quality is obtained when isobornyl acrylate is polymerized first. For lower Cu levels a one‐pot semi‐batch procedure allows a much faster ATRP and better control over the polymer properties than a two‐pot batch procedure.

     

Development and Validation of Multi-Residue Method for Drugs Analysis in Human Feces by Liquid Chromatography–Tandem Mass Spectrometry

The use of veterinary drugs in animal production is a common practice to secure animal and human health. However, residues of administrated drugs could be present in animal food products. Levels of drugs in food of animal origin are regulated within the European Union. In recent years, residues have been detected not only in food, but also in the environmental elements such as water or soil, meaning that humans are involuntarily exposed to these substances. This article presents a multiclass method for the analysis of various therapeutic groups of pharmaceuticals in human feces. Pharmaceuticals are extracted from feces with an acid extraction solvent, and after filtration the extract was analyzed by HPLC–MS/MS. A limit of detection of 10 ng/g was achieved for 9 pharmaceuticals, with linearity over 0.99 and repeatability and reproducibility lower than 20%. The method was satisfactorily applied in 25 feces samples of individuals that had declared not to be under medical treatment for the last two months. Results indicate the presence of six different compounds at concentration between 10 and 456 ng/g. This preliminary study showed the involuntary exposure of human gut microbiota to active substances such as pharmaceuticals     

Recovery of Bioactive Ellagitannins by Ultrasound/Microwave-Assisted Extraction from Mexican Rambutan Peel (Nephelium lappaceum L.)

Rambutan (Nephelium lappaceum L.) is a tropical fruit from Asia which has become the main target of many studies involving polyphenolic analysis. Mexico produces over 8 million tons per year of rambutan, generating a huge amount of agro-industrial waste since only the pulp is used and the peel, which comprises around 45% of the fruit’s weight, is left behind. This waste can later be used in the recovery of polyphenolic fractions. In this work, emerging technologies such as microwave, ultrasound, and the hybridization of both were tested in the extraction of phenolic compounds from Mexican rambutan peel. The results show that the hybrid technology extraction yielded the highest polyphenolic content (176.38 mg GAE/g of dry rambutan peel). The HPLC/MS/ESI analysis revealed three majoritarian compounds: geraniin, corilagin, and ellagic acid. These compounds explain the excellent results for the biological assays, namely antioxidant activity evaluated by the DPPH, ABTS, and LOI (Lipid oxidation inhibition) assays that exhibited great antioxidant capacity with IC₅₀ values of 0.098, 0.335, and 0.034 mg/mL respectively, as well as prebiotic activity demonstrated by a µMax (maximum growth) of 0.203 for Lactobacillus paracasei. Lastly, these compounds have shown no hemolytic activity, opening the door for the elaboration of different products in the food, cosmetic, and pharmaceutical industries.     

Nanostructures of sodium titanate/zirconium oxide

In this work is reported the synthesis of nanotubes and nanoribbons from mixed oxides (Ti_1−x Zr _x O₂·nH₂O), employing hydrothermal treatment in a highly alkaline medium. The morphology and crystal structure of the products obtained via hydrothermal treatment depend on the value of x. For example, for x equal to 0 and 0.50 were observed the presence of nanotubes (diameter around 9 nm) and nanoribbons (diameter around 200 nm), respectively. However, for x values above 0.50, there was no morphological change. Regarding the crystalline structure of these samples, for x equal to 0 was observed the sodium titanate phase; already for x values up to 0.50, we observed the presence of two crystalline phases: sodium titanate and tetragonal ZrO₂. For x values above 0.50, only tetragonal ZrO₂ was observed. Furthermore, only the product obtained from x equal to 0.15 was observed the presence of three-dimensional flower-like arrangements. The results obtained by the characterization techniques showed the segregation of zirconium after hydrothermal treatment of precursors with x less or equal to 0.50. Thus, we describe the important role that Ti/Zr molar ratio of the precursor plays on the morphology and crystalline phase of the products formed by hydrothermal treatment.