Nanometrization of Lanthanide‐Based Coordination Polymers

Heteronuclear lanthanide‐based coordination polymers are microcrystalline powders, the luminescence properties of which can be precisely tuned by judicious choice of the rare‐earth ions. In this study, we demonstrate that such materials can also be obtained as stable solutions of nanoparticles in non‐toxic polyols. Bulk powders of the formula [Ln_2?2xLn′_2x(bdc)₃ ? 4 H₂O]_∞ (where H₂bdc denotes 1,4‐benzene‐dicarboxylic acid, 0≤x≤1, and Ln and Ln′ denote lanthanide ions of the series La to Tm plus Y) afford nanoparticles that have been characterized by dynamic light‐scattering (DLS) and transmission electron microscopy (TEM) measurements. Their luminescence properties are similar to those of the bulk materials. Stabilities versus time and versus dilution with another solvent have been studied. This study has revealed that it is possible to tune the size of the nanoparticles. This process offers a reliable means of synthesizing suspensions of nanoparticles with tunable luminescence properties and tunable size distributions in a green solvent (glycerol). The process is also extendable to other coordination polymers and other solvents (ethylene glycol, for example). It constitutes a new route for the facile solubilization of lanthanide‐based coordination polymers.     

Rheology and gelation kinetics of PVC plastisols

Oscillatory rheological experiments at different temperatures and over a wide range of frequencies have been used to investigate the gelation process and, more particularly, the sol–gel transition of various poly(vinyl chloride) (PVC) plastisols. The sol–gel transition process was found to be universal with respect to the temperature and solid volume fraction according to the similarity of the fractal structure in PVC plastisols. The variation of the gel time (t _gel) with temperature for any composition of PVC plastisols was predicted from the Dickinson’s model (E. Dickinson, J Chem Soc Faraday Trans, 93:111–114, 1997). Dynamic viscoelastic properties of PVC plastisols have also been studied as a function of temperature that allowed us to follow the gelation process of various plastisols. Thus, the influence of the type and concentration of PVC resins in gelation process was investigated. The variation of the complex shear modulus at a constant frequency was depicted by a master curve regarding the dependence of the moduli on PVC concentrations.     

Influence of mixed thiolate/thioether versus dithiolate coordination on the accessibility of the uncommon +I and +III oxidation states for the nickel ion: an experimental and computational study

Sulfur-rich nickel metalloenzymes are capable of stabilizing Ni(I) and Ni(III) oxidation states in catalytically relevant species. In an effort to better understand the structural and electronic features that allow the stabilization of such species, we have investigated the electrochemical properties of two mononuclear N(2)S(2) Ni(II) complexes that differ in their sulfur environment. Complex 1 features aliphatic dithiolate coordination ([NiL], 1), and complex 2I is characterized by mixed thiolate/thioether coordination ([NiL(Me)]I, 2I). The latter results from the methylation of a single sulfur of 1. The X-ray structure of 2I reveals a distorted square planar geometry around the Ni(II) ion, similar to what was previously reported by us for 1. The electrochemical investigation of 1 and 2(+) shows that the addition of a methyl group shifts the potentials of both redox Ni(II)/Ni(I) and Ni(III)/Ni(II) redox couples by about 0.7 and 0.6 V to more positive values. Through bulk electrolyses, only the mononuclear dithiolate [Ni(I)L](-) (1(-)) and the mixed thiolate/thioether [Ni(III)L(Me)](2+) (2(2+)) complexes were generated, and their electronic properties were investigated by UV-vis and EPR spectroscopy. For 1(-) (Ni(I), d(9) configuration) the EPR data are consistent with a d(x(2))(-)(y(2)) based singly occupied molecular orbitals (SOMOs). However, DFT calculations suggest that there is also pronounced radical character. This is consistent with the small g-anisotropy observed in the EPR experiments. The spin population (Mulliken analysis) analysis of 1(-) reveals that the main contribution to the SOMO (64%) is due to the bipyridine unit. Time dependent density functional theory (TD-DFT) calculations attribute the most prominent features observed in the electronic absorption spectrum of 1(-) to metal to ligand charge transfer (MLCT) transitions. Concerning 2(2+), the EPR spectrum displays a rhombic signal with g(x) = 2.236, g(y) = 2.180, and g(z) = 2.039 in CH(3)CN. The g(iso) value is larger than 2.0, which is consistent with metal based oxidation. The unpaired electron (Ni(III), d(7) configuration) occupies a Ni-d(z(2)) based molecular orbital, consistent with DFT calculations. Nitrogen hyperfine structure is observed as a triplet in the g(z) component of the EPR spectrum with A(N) = 51 MHz. This result indicates the coordination of a CH(3)CN molecule in the axial position. DFT calculations confirm that the presence of a fifth ligand in the coordination sphere of the Ni ion is required for the metal-based oxidation process. Finally, we have shown that 1 exhibits catalytic reductive dehalogenation activity below potentials of -2.00 V versus Fc/Fc(+) in CH(2)Cl(2).     

Femtosecond dynamics of the ring closing process of diarylethene: a case study of electrocyclic reactions in photochromic single crystals

The cyclization reaction of the photochromic diarylethene derivative 1,2-bis(2,4-dimethyl-5-phenyl-3-thienyl)perfluorocyclopentene was studied in its single crystal phase with femtosecond transient absorption spectroscopy. The transient absorption measurements were performed with a robust acquisition scheme that explicitly exploits the photoreversibility of the molecular system and monitors the reversibility conditions. The crystalline system demonstrated 3 × 10(4) repeatable cycles before significant degradation was observed. Immediately following photoexcitation, the excited state absorption associated with the open-ring conformation undergoes a large spectral shift with a time constant of approximately 200 fs. Following this evolution on the excited state potential energy surface, the ring closure occurs with a time constant of 5.3 ps, which is significantly slower than previously reported measurements for similar derivatives in the solution phase. Time resolved electron diffraction studies were used to further demonstrate the assignment of the transient absorption dynamics to the ring closing reaction. The mechanistic details of the ring closing are discussed in the context of prior computational work along with a vibrational mode analysis using density functional theory to give some insight into the primary motions involved in the ring closing reaction.     

Selective conversion of {Mo132} Keplerate ion into 4-electron reduced crown-capped Keggin derivative [Te5Mo15O57](8-). A key intermediate to single-phase M1 multielement MoVTeO light-alkanes oxidation catalyst

{Mo(132)} Keplerate anion reacts with tellurites to give a soluble precursor to produce in hydrothermal conditions single-phase M1 MoVTeO light-alkanes oxidation catalyst. Characterization of this Te-containing intermediate by single-crystal X-ray diffraction, (125)Te NMR, UV-visible and redox titration reveals a molybdotellurite anion as a crown-capped Keggin derivative.     

The effects of time constraints on phonatory stability in normally speaking adult women

Forty normally speaking women sustained /a/ five times in two conditions,untimed and timed. In the untimed condition, phonation began whenever the subject felt ready. The timed task required subjects to begin phonation as quickly as possible after the examiner's signal. Conditions were counterbalanced across subjects. Jitter and shimmer values were obtained on a Kay Elemetrics Computerized Speech Lab (Pine Brook, NJ). Three distinct patterns of change emerged for fitter and shimmer from the untimed to the timed condition, reflecting either decreases, increases, or no change in values. These changes in jitter and shimmer values across conditions are related to a reaction time model of “bias toward accuracy.”     

Arytenoid Cartilage Dislocation: A 20-year Experience

SUMMARY: Arytenoid cartilage dislocation is an infrequently diagnosed cause of vocal fold immobility. Seventy-four cases have been reported in the literature to date. Intubation is the most common origin, followed by external laryngeal trauma. Decreased volume and breathiness are the most common presenting symptoms. We report on 63 patients with arytenoid cartilage dislocation treated by the senior author (RTS) since 1983. Significantly more posterior than anterior dislocations were represented. Although reestablishing joint mobility is difficult, endoscopic reduction should be considered to align the heights of the vocal processes. This process may result in significant voice improvement even long after the dislocation. Strobovideolaryngoscopy, laryngeal electromyography, and laryngeal computed tomography (CT) imaging are helpful in the evaluation of patients with vocal fold immobility to help distinguish arytenoid cartilage dislocation from vocal fold paralysis. Familiarity with signs and symptoms of arytenoid cartilage dislocation and current treatment techniques improves the chances for optimal therapeutic results.     

Facile synthesis of a cis-syn thymine dimer building block and its incorporation into oligodeoxynucleotides

The synthesis of a building block containing the photobiologically relevant cis-syn thymine cyclobutane photoproduct and its incorporation into oligonucleotides by the phosphoramidite-based solid-phase synthesis is reported. Compared to previous syntheses, this route is extremely short and allows such modified oligonucleotides to be easily available for biological studies.     

Cracking in polylactide spherulites

A polylactide of high optical purity was crystallized between 100 and 140 °C, in‐between two glass slides, and its morphology was investigated by polarizing optical microscopy, scanning electron microscopy, and atomic force microscopy, during subsequent heating and cooling cycles between ?15 °C and the crystallization temperature. It was found that dark circular rings show up on cooling on top of the spherulites and represent cracks of about 300 nm in width. This phenomenon is completely reversible, and the heating–cooling curves are centered at about 56 °C, which coincide with the T_g of polylactide. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3308–3315, 2005     

Spasmodic dysphonia symptoms as initial presentation of amyotrophic lateral sclerosis

A patient initially diagnosed with adductor-type spasmodic dysphonia was referred for botulinum toxin (Botox) injections, but found on subsequent evaluation to have amyotrophic lateral sclerosis, and therefore Botox was not administered. This unique case underscores the need to delay botulinum toxin treatments in any patient with recent onset symptoms, and to obtain thorough motor speech and voice, otolaryngologic, and neurologic evaluation in all patients prior to consideration for injection.