A comparison study of multishot vs. single-shot DWI-EPI in the neonatal brain: reduced effects of ghosting compared to adults

In the neonatal brain, it is important to use a fast imaging technique to acquire all diffusion weighted images (DWI) for apparent diffusion coefficient (ADC) calculation. Taking into account the occurrence of typical echo planar imaging (EPI) artifacts, we have investigated whether single-shot (SSh) or multishot (MSh) DWI-EPI should be preferred. In 14 neonates, 17 adult patients and 5 adult volunteers, DWIs are obtained both with SSh and MSh EPI. The occurrence of artifacts and their influence on the ADC are explored and further quantified using simulations and phantom studies. Two radiologists scored overall image quality and diagnosability of all images. Single-shot and MSh DWI-EPI scored equally well in neonates with respect to overall image quality and diagnosability. In newborns, more motion artifacts in MSh can be noticed while N/2-ghost artifacts in SSh occur less frequently than in adults. Both N/2-ghost and motion artifacts result in significant ADC abnormalities. There is a serious risk that these artifacts will be mistaken for genuine diffusion abnormalities. N/2-ghost artifacts are hardly noticed in the neonatal brain, which might be due to smaller cerebrospinal fluid (CSF) velocity than in adults. Apparent diffusion coefficient values in MSh are unreliable if motion occurs. We conclude that for ADC calculations in neonates SSh DWI-EPI is more reliable than MSh.     

Light harvesting architectures for electron beam evaporated solid phase crystallized Si thin film solar cells: Statistical and periodic approaches

The fabrication of light trapping architectures for electron beam (e-beam) evaporated polycrystalline Si thin film solar cells is investigated based on tailored self-organized light scattering silica nanospheres and 2 dimensional periodic nanoimprinted structures on glass. A microscopic analysis reveals a unique correlation between the microstructure of high-rate e-beam evaporated Si and the substrate topography. These features provide the basis for the design of nanostructured Si that complies with its distinctive growth characteristics. A layer of self-organized nanospheres embedded in a sol–gel matrix and an anti-reflection coating is found to be an e-beam compatible light trapping approach for poly-Si solar cells, contributing to an increase of 50% in current collection. We developed a preparation process for arrays of equidistant free-standing Si crystals with remarkable optical absorption characteristics based on a nanoimprinted glass substrate by selectively etching e-beam evaporated Si. This periodic approach opens design possibilities for effective three-dimensional architectures for advanced photon management.     

Synthesis of the O-linked hexasaccharide containing β-D-Galf-(1→2)-β-D-Galf in Trypanosoma cruzi mucins

The hexasaccharide β-D-Galp-(1→2)-[β-D-Galp-(1→3)]-β-D-Galp-(1→6)-[β-D-Galf(1→2)-β-D-Galf(1→4)]-D-GlcNAc (1) is the largest carbohydrate structure released as alditol by reductive β-elimination from mucins of some strains of T. cruzi. The terminal β-D-Galp units are sites of sialylation by trans-sialidase which transfers sialic acid from the host to the parasite. Hexasaccharide 1 was synthesized by a [3 + 3]-convergent strategy based on a nitrile assisted glycosylation, using the trichloroacetimidate method. The β-D-Galf-(1→2)-β-D-Galf-D-GlcNAc synthon was sequentially constructed from the reducing end to the non-reducing end employing benzyl α-D-galactofuranoside as starting material for the internal Galf unit. The choice of this novel precursor, obtained in one-reaction step from galactose, allowed the introduction of an orthogonal and participating levulinoyl group at O-2. Thus, the diastereoselective construction of the Galf-β(1→4)-GlcNAc linkage by the trichloroacetimidate method of glycosylation was achieved. The (1)H NMR spectrum of alditol 2 was identical to the product released by β-elimination from the parasite mucin.     

Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Determination of Trace Elements in Geological Glasses

 Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was used as a powerful multielement analytical method for trace analysis of geological glasses which are useful as reference materials for geochemical in-situ microanalytical work. The quantification of the analytical results was carried out using the BCR-2G and NIST 612 glass standard reference material (SRM). The experimentally determined relative sensitivity coefficients (RSC) for both SRMs vary between 0.2 and 3 for most of the elements, with increasing mass an increasing of relative sensitivity coefficients was observed. The relative standard deviation (RSD) for determination of trace element concentration of most elements (N=3) are between 2 and 10%. The determination of trace elements in various geological glasses by LA-ICP-MS yielded a good agreement with the reference values and those results of other trace analytical methods. Received October 15, 1999. Revision April 14, 2000.     

Determination of phosphorus in small amounts of protein samples by ICP–MS

Inductively coupled plasma mass spectrometry (ICP-MS) is used for phosphorus determination in protein samples. A small amount of solid protein sample (down to 1 micro g) or digest (1-10 micro L) protein solution was denatured in nitric acid and hydrogen peroxide by closed-microvessel microwave digestion. Phosphorus determination was performed with an optimized analytical method using a double-focusing sector field inductively coupled plasma mass spectrometer (ICP-SFMS) and quadrupole-based ICP-MS (ICP-QMS). For quality control of phosphorus determination a certified reference material (CRM), single cell proteins (BCR 273) with a high phosphorus content of 26.8+/-0.4 mg g(-1), was analyzed. For studies on phosphorus determination in proteins while reducing the sample amount as low as possible the homogeneity of CRM BCR 273 was investigated. Relative standard deviation and measurement accuracy in ICP-QMS was within 2%, 3.5%, 11% and 12% when using CRM BCR 273 sample weights of 40 mg, 5 mg, 1 mg and 0.3 mg, respectively. The lowest possible sample weight for an accurate phosphorus analysis in protein samples by ICP-MS is discussed. The analytical method developed was applied for the analysis of homogeneous protein samples in very low amounts [1-100 micro g of solid protein sample, e.g. beta-casein or down to 1 micro L of protein or digest in solution (e.g., tau protein)]. A further reduction of the diluted protein solution volume was achieved by the application of flow injection in ICP-SFMS, which is discussed with reference to real protein digests after protein separation using 2D gel electrophoresis.The detection limits for phosphorus in biological samples were determined by ICP-SFMS down to the ng g(-1) level. The present work discusses the figure of merit for the determination of phosphorus in a small amount of protein sample with ICP-SFMS in comparison to ICP-QMS.     

Synthesis, structures and oxygen atom transfer catalysis of oxo-bridged molybdenum(V) complexes with heterocyclic bidentate ligands (N,X) X = S, Se

The dinuclear μ-oxomolybdenum(V) complexes [Mo₂O₃(PyS)₄] (1), [Mo₂O₃(PySe)₄] (2) and [Mo₂O₃(4-CF₃-PymS)₄] (3) were obtained by similar reactions of the [MoO₂Cl₂(DME)] precursor with the corresponding heterocyclic bidentate (N,X) ligands, X = S, Se, where PyS, PySe and 4-CF₃-PymS are the anions of pyridine-2-thione, pyridine-2-selenolato and 4-trifluoromethyl-2-pyrimidinthiol, respectively. All compounds were characterized by elemental analysis, IR, NMR, EI-MS spectroscopy and X-ray diffraction. The crystal structures of 1–3 all include the common [Mo₂O₃]⁴⁺ core. Compounds 1 and 2 are isostructural. The catalytic oxo-transfer properties of the molybdenum(V) compounds 1 and 2 were studied by the use of PPh₃ in DMSO with a considerably higher catalytic activity for the thionato containing complex 1 than for its selenolato containing analogue 2.     

Effect of cellulase on the pore structure of bead cellulose

An enzymatic treatment with cellulases fromTrichoderma viride was investigated in its effect on the pore structure of different types of bead cellulose. One objective of this study was to establish a suitable procedure for combined enzymatic treatment and solvent exchange that would restore the original pore structure which the beads had before drying without causing major losses in mechanical stability. Another aim was to further increase the accessible pore space and internal surface area for separation of large molecular weight compounds with regard to Chromatographic applications. Finally, an attempt was made to extend the findings for unsubstituted beads to the derivatives carboxymethyl (CM) and diethylaminoethyl (DEAE) cellulose beads. The enzymatically treated samples were characterized by microscopic methods and porosity measurements such as mercury porosimetry, nitrogen sorption and size exclusion chromatography. It was found that under controlled conditions the low-porosity surface layer of dried beads could be removed making the internal pore space accessible without reducing the resistance to deformation of the beads. Additionally, a shift in pore size distribution towards larger pores was observed. Supplementary swelling treatments in solvents of high swelling power could substantially restore the former porosity of the dried beads but did not enhance the accessibility to the cellulases to a considerable extent. Internal pore volume and surface area of the derivatives were dramatically increased in the case of DEAE upon enzymatic hydrolysis, however, at the expense of mechanical stability, whereas CM was found to be less affected.     

Simultaneous determination of bifonazole and tinctures of calendula flower in pharmaceutical creams by reversed-phase liquid chromatography

The aim of this research was to develop and validate a sensitive, rapid, easy, and precise reversed-phase liquid chromatography (LC) method for stability studies of bifonazole (I) formulated with tinctures of calendula flower (II). The method was especially developed for the analysis and quantitative determination of I and II in pure and combined forms in cream pharmaceutical formulations without using gradient elution and at room temperature. The influence on the stability of compound I of temperature, artificial radiation, and drug II used for the new pharmaceutical design was evaluated. The LC separation was carried out using a Supelcosil LC-18 column (25 cm x 4.6 mm id, 5 microm particle size); the mobile phase was composed of methanol-0.1 M ammonium acetate buffer (85 + 15, v/v) pumped isocratically at a flow rate of 1 mL/min; and ultraviolet detection was at 254 nm. The analysis time was less than 10 min. Calibration graphs were found to be linear in the 0.125-0.375 mg/mL (rI = 0.9991) and 0.639-1.916 mg/mL (rII = 0.9995) ranges for I and II, respectively. The linearity, precision, recovery, and limits of detection and quantification were satisfactory for I and II. The results obtained suggested that the developed LC method is selective and specific for the analysis of I and II in pharmaceutical products, and that it can be applied to stability studies.     

Synthesis and ligand properties of thianthrenophane

Thianthrenophane 1 has a cavity which offers enough room to potentially enable endohedral coordination to small ions or molecules. For the complexation of silver(I) perchlorate the complex stability constants of 1 logK1=5.45 +/- 0.13 and of thianthrene logK2=9.16 +/- 0.10 were determined by UV/Vis titration. Single competition transport experiments with ten metal salts demonstrate a very high selectivity of 1 as a carrier for silver(I) and a distinctly higher transport rate compared to carriers such as thianthrene and 1,4,8,11-tetrathiacyclotetradecane (14-ane-S4). Although the X-ray crystal structure analysis of the polymeric [Ag(1)]ClO4.(dioxane)7 complex shows an exohedral coordination to silver(I) we suggest that the formation of an endohedral [Ag(1)]+ complex is the explanation for the unusual carrier selectivity of silver(I) by 1 in bulk liquid membrane.