N,N′-Ethylene-Bridged Bis-2-Aryl-Pyrrolinium Cations to E-Diaminoalkenes: Non-Identical Stepwise Reversible Double-Redox Coupled Bond Activation Reactions

This work presents a stepwise reversible two-electron transfer induced hydrogen shift leading to the conversion of a bis-pyrrolinium cation to an E-diaminoalkene and vice versa. Remarkably, the forward and the reverse reaction, which are both reversible, follow two completely different reaction pathways. Establishing such unprecedented property in this type of processes was possible by developing a novel synthetic route towards the starting dication. All intermediates involved in both the forward and the backward reactions were comprehensively characterized by a combination of spectroscopic, crystallographic, electrochemical, spectroelectrochemical, and theoretical methods. The presented synthetic route opens up new possibilities for the generation of multi-pyrrolinium cation scaffold-based organic redox systems, which constitute decidedly sought-after molecules in contemporary chemistry.     

On-line precipitation/dissolution system for the preconcentration and determination of manganese traces by atomic absorption spectrometry

Flame atomic absorption spectrometry was used for the determination of Mn in biological material following preconcentration by precipitation. The proposed preconcentration method is based on the continuous precipitation of Mn(II) as hydrated Mn(IV) oxide in ammonia buffer and dissolution of the precipitate with hydrogen oxalate or dilute nitric acid. The sensitivity of the Mn determination is increased by the presence of hydrogen peroxide, which raises the rate of oxidation of Mn(II) to Mn(IV). By using a time-based technique (at a sample loading rate of 4 ml min⁻¹) a concentration factor of up to 55 was obtained using 24 ml of sample. The effect of concurrent cations was investigated; the most adverse effect was exerted by Fe(III), which interfered at concentrations 50 times higher than that of Mn(II).     

Wet-chemical treatment and electronic interface properties of silicon solar cell substrates

On textured n-type silicon substrates for solar cell manufacturing, the relation between light trapping behavior, structural imperfections, energetic distribution of interface state densities and interface recombination losses were investigated by applying surface sensitive techniques. The field-modulated surface photovoltage (SPV), in-situ photoluminescence (PL) measurements, total hemispherical UV-NIR-reflectance measurements and electron microscopy (SEM) were employed to yield detailed information on the influence of wet-chemical treatments on preparation induced micro-roughness and electronic properties of polished and textured silicon substrates. It was shown that isotropic as well as anisotropic etching of light trapping structures result in high surface micro-roughness and density of interface states. Removing damaged surface layers in the nm range by wet-chemical treatments, the density of these states and the related interface recombination loss can be reduced. In-situ PL measurements were applied to optimise HF-treatment times aimed at undamaged, oxide-free and hydrogen-terminated substrate surfaces as starting material for subsequent solar cell preparations.      

A comparison study of multishot vs. single-shot DWI-EPI in the neonatal brain: reduced effects of ghosting compared to adults

In the neonatal brain, it is important to use a fast imaging technique to acquire all diffusion weighted images (DWI) for apparent diffusion coefficient (ADC) calculation. Taking into account the occurrence of typical echo planar imaging (EPI) artifacts, we have investigated whether single-shot (SSh) or multishot (MSh) DWI-EPI should be preferred. In 14 neonates, 17 adult patients and 5 adult volunteers, DWIs are obtained both with SSh and MSh EPI. The occurrence of artifacts and their influence on the ADC are explored and further quantified using simulations and phantom studies. Two radiologists scored overall image quality and diagnosability of all images. Single-shot and MSh DWI-EPI scored equally well in neonates with respect to overall image quality and diagnosability. In newborns, more motion artifacts in MSh can be noticed while N/2-ghost artifacts in SSh occur less frequently than in adults. Both N/2-ghost and motion artifacts result in significant ADC abnormalities. There is a serious risk that these artifacts will be mistaken for genuine diffusion abnormalities. N/2-ghost artifacts are hardly noticed in the neonatal brain, which might be due to smaller cerebrospinal fluid (CSF) velocity than in adults. Apparent diffusion coefficient values in MSh are unreliable if motion occurs. We conclude that for ADC calculations in neonates SSh DWI-EPI is more reliable than MSh.     

Light harvesting architectures for electron beam evaporated solid phase crystallized Si thin film solar cells: Statistical and periodic approaches

The fabrication of light trapping architectures for electron beam (e-beam) evaporated polycrystalline Si thin film solar cells is investigated based on tailored self-organized light scattering silica nanospheres and 2 dimensional periodic nanoimprinted structures on glass. A microscopic analysis reveals a unique correlation between the microstructure of high-rate e-beam evaporated Si and the substrate topography. These features provide the basis for the design of nanostructured Si that complies with its distinctive growth characteristics. A layer of self-organized nanospheres embedded in a sol–gel matrix and an anti-reflection coating is found to be an e-beam compatible light trapping approach for poly-Si solar cells, contributing to an increase of 50% in current collection. We developed a preparation process for arrays of equidistant free-standing Si crystals with remarkable optical absorption characteristics based on a nanoimprinted glass substrate by selectively etching e-beam evaporated Si. This periodic approach opens design possibilities for effective three-dimensional architectures for advanced photon management.     

Synthesis of the O-linked hexasaccharide containing β-D-Galf-(1→2)-β-D-Galf in Trypanosoma cruzi mucins

The hexasaccharide β-D-Galp-(1→2)-[β-D-Galp-(1→3)]-β-D-Galp-(1→6)-[β-D-Galf(1→2)-β-D-Galf(1→4)]-D-GlcNAc (1) is the largest carbohydrate structure released as alditol by reductive β-elimination from mucins of some strains of T. cruzi. The terminal β-D-Galp units are sites of sialylation by trans-sialidase which transfers sialic acid from the host to the parasite. Hexasaccharide 1 was synthesized by a [3 + 3]-convergent strategy based on a nitrile assisted glycosylation, using the trichloroacetimidate method. The β-D-Galf-(1→2)-β-D-Galf-D-GlcNAc synthon was sequentially constructed from the reducing end to the non-reducing end employing benzyl α-D-galactofuranoside as starting material for the internal Galf unit. The choice of this novel precursor, obtained in one-reaction step from galactose, allowed the introduction of an orthogonal and participating levulinoyl group at O-2. Thus, the diastereoselective construction of the Galf-β(1→4)-GlcNAc linkage by the trichloroacetimidate method of glycosylation was achieved. The (1)H NMR spectrum of alditol 2 was identical to the product released by β-elimination from the parasite mucin.     

Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Determination of Trace Elements in Geological Glasses

 Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was used as a powerful multielement analytical method for trace analysis of geological glasses which are useful as reference materials for geochemical in-situ microanalytical work. The quantification of the analytical results was carried out using the BCR-2G and NIST 612 glass standard reference material (SRM). The experimentally determined relative sensitivity coefficients (RSC) for both SRMs vary between 0.2 and 3 for most of the elements, with increasing mass an increasing of relative sensitivity coefficients was observed. The relative standard deviation (RSD) for determination of trace element concentration of most elements (N=3) are between 2 and 10%. The determination of trace elements in various geological glasses by LA-ICP-MS yielded a good agreement with the reference values and those results of other trace analytical methods. Received October 15, 1999. Revision April 14, 2000.     

Determination of phosphorus in small amounts of protein samples by ICP–MS

Inductively coupled plasma mass spectrometry (ICP-MS) is used for phosphorus determination in protein samples. A small amount of solid protein sample (down to 1 micro g) or digest (1-10 micro L) protein solution was denatured in nitric acid and hydrogen peroxide by closed-microvessel microwave digestion. Phosphorus determination was performed with an optimized analytical method using a double-focusing sector field inductively coupled plasma mass spectrometer (ICP-SFMS) and quadrupole-based ICP-MS (ICP-QMS). For quality control of phosphorus determination a certified reference material (CRM), single cell proteins (BCR 273) with a high phosphorus content of 26.8+/-0.4 mg g(-1), was analyzed. For studies on phosphorus determination in proteins while reducing the sample amount as low as possible the homogeneity of CRM BCR 273 was investigated. Relative standard deviation and measurement accuracy in ICP-QMS was within 2%, 3.5%, 11% and 12% when using CRM BCR 273 sample weights of 40 mg, 5 mg, 1 mg and 0.3 mg, respectively. The lowest possible sample weight for an accurate phosphorus analysis in protein samples by ICP-MS is discussed. The analytical method developed was applied for the analysis of homogeneous protein samples in very low amounts [1-100 micro g of solid protein sample, e.g. beta-casein or down to 1 micro L of protein or digest in solution (e.g., tau protein)]. A further reduction of the diluted protein solution volume was achieved by the application of flow injection in ICP-SFMS, which is discussed with reference to real protein digests after protein separation using 2D gel electrophoresis.The detection limits for phosphorus in biological samples were determined by ICP-SFMS down to the ng g(-1) level. The present work discusses the figure of merit for the determination of phosphorus in a small amount of protein sample with ICP-SFMS in comparison to ICP-QMS.