Fatty Acid Carboxylate‐ and Anionic Surfactant‐Controlled Delivery Systems That Use Mesoporous Silica Supports

We report the preparation of a MCM‐41 mesoporous material that contains the dye [Ru(bipy)₃]Cl₂ (bipy=bipyridine) inside the mesopores and functionalised with suitable binding groups at the entrance of the pores. Solids S1 – S3 were obtained by the reaction of the mesoporous material with N‐methyl‐N′‐propyltrimethoxysilylimidazolium chloride, N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]thiourea, or N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]urea, respectively. A study of the dye delivery of these systems in buffered water (pH 7.0, 2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]ethanesulfonic acid (HEPES), 10^?3 mol dm^?3) in the presence of a family of carboxylate ions was carried out. In the interaction of the anions with the surface of the solids, the response depends on the characteristics of the binding groups (i.e., imidazolium, urea and thiourea) at the pore outlets and their specific interaction with the corresponding anion. The interaction of long‐chain carboxylate ions with the binding sites at the surface of the solids resulted in a remarkable inhibition of the delivery of the dye. This inhibition was observed clearly for the dodecanoate anion, whereas the octanoate, decanoate, cholate, deoxycholate, glycodeoxycholate and taurocholate anions induced a certain pore blockage that varied according to the solid studied. The interaction of smaller anions, such as acetate, butanoate, hexanoate and octanoate, with the solids had no effect on the dye release process. The possible use of the gating system for the chromo‐fluorogenic detection of anionic surfactants through selective dye delivery inhibition was also explored. Molecular dynamic simulations that use force‐field methods have been made to theoretically study the capping carboxylate mechanism. The calculations are in agreement with the experimental results, thus allowing a representation of the dye delivery inhibition in the presence of long‐chain carboxylate ions.     

Differentiation between [1,2,4]triazolo[1,5‐a] pyrimidine and [1,2,4]triazolo[4,3‐a]‐ pyrimidine regioisomers by 1H?15N HMBC experiments

The condensation of malonoaldehyde derivatives with either a 3‐amino‐[1,2,4]‐triazole or a 3,5‐diamino‐[1,2,4]‐triazole precursor was studied. In agreement with previous reports, two different bicycles, namely, bearing the regioisomeric [1,2,4]triazolo[1,5‐a]pyrimidine ( 1 ) or[1,2,4] triazolo [4,3‐a]pyrimidine ( 2 ) structural surrogates, could be obtained. We found that, depending on the triazole precursor, only one regioisomer resulted, either of the 1 or 2 series. We also observed that these two structural surrogates could be unambiguously differentiated by indirectly measuring their ¹⁵N chemical shifts by ¹H? ¹⁵N HMBC experiments. The occasional conversion of [1,2,4]triazolo[4,3‐a]pyrimidines to the [1,2,4]triazolo[1,5‐a]pyrimidine counterparts could be unequivocally determined by ¹⁵N NMR data. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermodynamics of the Dimer Formation of 2I,3I-O-(o-Xylylene)-per-O-Me-γ-cyclodextrin: Fluorescence, Molecular Mechanics and Molecular Dynamics

The thermodynamics of the dimer formation of 2^I,3^I-O-(o-xylylene)-per-O-Me-γ-cyclodextrin (XmγCD) in aqueous solution was studied by fluorescence techniques, Molecular Mechanics and Molecular Dynamics. Lifetime averages á t ñ \left\langle \tau \right\rangle , obtained from fluorescence decay profiles upon excitation of the xylylene appended group, were used as the property sensitive to the association process. The dimerization equilibrium constants (K _D) were obtained from non-linear regression analysis of the plots of á t ñ \left\langle \tau \right\rangle against [XmγCD] at several temperatures and they were compared with the values obtained for the counterparts Xmα- and XmβCDs. The van’t Hoff plot allows us to obtain the ΔH and ΔS showing that the dimerization process was also entropically disfavoured. Molecular Mechanics as well as Molecular Dynamics calculations in the presence of water were also employed to study the conformational behaviour of isolated XmγCDs, the possible structure of the dimers formed and the driving forces involved in such association processes. Results indicate that those conformations where Xy moiety does not block the cavity entrance are favoured. Dimers are preferably formed by head-to-head CD approaching. However, the formation of stable head-to-tail is not dismissed.     

Binap-gold(I) trifluoroacetate as a bifunctional catalyst for the synthesis of chiral prolines through 1,3-dipolar cycloaddition of azomethine ylides

Highly enantioselective 1,3-dipolar cycloadditions of amino acid-derived azomethine ylides with alkenes have been performed, for the first time, under gold-catalysis using (S_a)- or (R_a)-Binap-gold(I) trifluoroacetate complexes, with the cationic Binap-gold acting as a Lewis acid and the counteranion as a base. Maleimides and trans-1,2-bis(phenylsulfonyl)ethylene were reacted with imino esters at room temperature in the absence of a base to afford, in very good yields, the corresponding polysubstituted prolines with total endo-diastereoselection and higher enantioselectivities than the Binap-silver trifluoroacetate complex.     

Phosphine Ligands in the Palladium‐Catalysed Methoxycarbonylation of Ethene: Insights into the Catalytic Cycle through an HP NMR Spectroscopic Study

Novel cis‐1,2‐bis(di‐tert‐butyl‐phosphinomethyl) carbocyclic ligands 6 – 9 have been prepared and the corresponding palladium complexes [Pd(O₃SCH₃)(L‐L)][O₃SCH₃] (L‐ L=diphosphine) 32 – 35 synthesised and characterised by NMR spectroscopy and X‐ray diffraction. These diphosphine ligands give very active catalysts for the palladium‐catalysed methoxycarbonylation of ethene. The activity varies with the size of the carbocyclic backbone, ligands 7 and 9 , containing four‐ and six‐membered ring backbones giving more active systems. The acid used as co‐catalyst has a strong influence on the activity, with excess trifluoroacetic acid affording the highest conversion, whereas excess methyl sulfonic acid inhibits the catalytic system. An in operando NMR spectroscopic mechanistic study has established the catalytic cycle and resting state of the catalyst under operating reaction conditions. Although the catalysis follows the hydride pathway, the resting state is shown to be the hydride precursor complex [Pd(O₃SCH₃)(L‐ L)][O₃SCH₃], which demonstrates that an isolable/detectable hydride complex is not a prerequisite for this mechanism.     

Chiral diphosphines and diphosphinites derived from 2,2-biphosphole: Stereodynamic ligands for asymmetric catalysis

In this account, the recent advances on chiral stereochemically dynamic 2,2’-biphosphole ligands for applications in asymmetric catalysis are reported. In the first part, the synthesis of stereodynamic diphosphines and diphosphinites derived from 2,2’-biphosphole is presented. The second part describes the kinetic dynamic resolution to give diastereo- and enantiopure complexes. Applications in asymmetric allylic substitution, hydroformylation and hydrogenation are presented in the last part.     

New hydrogels from interpenetrated physical gels of agarose and chemical gels of polyacrylamide: Effect of relative concentration and crosslinking degree on the viscoelastic and thermal properties

In this article, we report on the viscoelastic and thermal properties of agarose–polyacrylamide (PAAm) interpenetrating polymer hydrogels (IPHs) and semi‐IPHs as a function of agarose concentration and PAAm crosslinking degree. The results demonstrated that the agarose is able to gel in the presence of crosslinked and linear IPHs. In addition, the reticulation of PAAm in the presence of agarose is confirmed for the case of IPHs giving rise to systems with dimensional stability at high temperatures. The formation of a fully IPH was ascertained at low agarose concentrations. A study of the morphology and nanoscale elasticity of the different systems has been carried out with atomic force microscopy/ultrasonic force microscopy (UFM). UFM data provide further evidence of interpenetration, allowing us to visualize—if present—phase‐separated domains with nanoscale resolution for the various crosslinking degrees and PAAm and agarose concentrations used during the formation of the IPHs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Study of the effect of poly(vinyl alcohol) concentration on the gelation point of poly(vinyl alcohol) poly(acrylic acid) semi‐IPN systems as determined by viscoelastic measurements

We report on the determination of the gelation point of semi‐interpenetrating polymer networks (semi‐IPNs) composed of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAAc) formed by a sequential method. The evolution of the viscoelasticity during the gelation reaction of acrylic acid (AAc) in solutions of PVA has been monitored through the sol‐gel transition with dynamic mechanical experiments. The gelation time of the system increased with PVA concentration; however, the molecular structure of the gel, composed of swollen clusters, is rather independent of the presence of PVA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1944–1949, 2005