Total solid-phase synthesis of the azathiocoraline class of symmetric bicyclic peptides

Thiocoraline is a potent antitumor agent isolated from the marine organism Micromonospora sp. This symmetric bicyclic depsipeptide binds the minor groove of DNA. Here we report two solid-phase strategies for the syntheses of azathiocoraline and its analogues. The thioester linkage was replaced by an amide bond to improve the compound's pharmacokinetic properties. The first strategy is based on a convergent (4+4) approach, whilst the second is a stepwise synthesis, cyclizations in both approaches occurring on the solid support. These two strategies were designed to overcome problems caused by the presence of consecutive noncommercial N-methyl amino acids, to avoid epimerization during cyclization and/or fragment condensation, and to form the disulfide bridge under solid-phase conditions. The heterocyclic moiety was added in the last step of the synthesis to assist the preparation of libraries of new compounds with potential therapeutic applications.     

Decomposition of anthranil. Single pulse shock-tube experiments, potential energy surfaces and multiwell transition-state calculations. The role of intersystem crossing

The thermal decomposition of anthranil diluted in argon was studied behind reflected shock waves in a 2 in. i.d. pressurized driver single-pulse shock tube over the temperature range 825-1000 K and overall densities of approximately 3 x 10(-5) mol/cm(3). Two major products: aniline and cyclopentadiene carbonitrile (accompanied by carbon monoxide) and four minor products resulting from the decomposition were found in the postshock samples. They were, in order of decreasing abundance, pyridine, CH(2)=CHCN, HCN and CHC-CN, and comprised only a few percents of the overall product distribution. Quantum chemical calculations were carried out to determine the sequence of the unimolecular reactions that lead to the formation of cyclopentadiene carbonitrile and of phenylnitrene/phenylimine that are the precursors of aniline. They form aniline by reactions with traces of water impurities. To produce cyclopentadiene carbonitrile, two main processes must take place: CO elimination and ring contraction from a six- to a five-membered ring. It was shown that this can occur via two parallel pathways where CO elimination takes place prior to or following ring contraction. Singlet potential energy surfaces for all the elementary reactions that lead to the formation of cyclopentadiene carbonitrile and phenylnitrene/phenylimine were obtained. Their rate constants were calculated on the basis of the results of the quantum chemical calculations using transition-state theory. A kinetic scheme containing these reactions was constructed and multiwell calculations were performed to evaluate the mole percent of the products as a function of temperature. A very serious disagreement between the experimental results and the results of calculations showed that the singlet PESs could not account for the observed experimental rates. No other singlet PESs that lead to the formation of these products could be found. In view of this observation, attempts to find pathways that lead to the formation of cyclopentadiene carbonitrile and phenylnitrene/phenylimine on triplet surfaces were made. Such surfaces were found, and singlet <--> triplet intersystem crossing probabilities and crossing rate constants were calculated as well as the rate constants of all the elementary steps on the triplet surfaces. A reaction scheme was constructed and multiwell calculations were performed, including also the pathways on the singlet surfaces, to evaluate the mole percent of the products as a function of temperature. The agreement between the experimental results and these calculations was quite satisfactory.     

Synthesis, crystal structure, and magnetic studies of one-dimensional cyano-bridged Ln3+-Cr3+ complexes with bpy as a blocking ligand

The reaction of Ln(NO3)3.aq with K3[Cr(CN)6] and 2,2'-bipyridine (bpy) in a water/ethanol solution led to two families of complexes: 4 one-dimensional (1D) complexes of the formula trans-[Cr(CN)4(mu-CN)2Ln(H2O)3(bpy)2]n.4nH2O.3.5nbpy (Ln3+ = La, Ce, Pr, and Nd) and 10 1D complexes of the formula trans-[Cr(CN)4(mu-CN)2Ln(H2O)4(bpy)]n.3.5nH2O.1.5nbpy (Ln3+ = Nd, Sm, Eu, Tb, Dy, Ho, Er, Tm, Yb, and Lu). The structures for the fourteen complexes [LaCr]n (1), [CeCr]n (2), [PrCr]n (3), [NdCr]n (4), [NdCr]n (4'), [SmCr]n (5), [EuCr]n (6), [TbCr]n (7), [DyCr]n (8), [HoCr]n (9), [ErCr]n (10), [TmCr]n (11), [YbCr]n (12), and [LuCr]n (13) have been solved. Complexes 1-4 crystallize in the orthorhombic space group Pbam and are isomorphous; complexes 4'-13 crystallize in the triclinic space group PI and are isomorphous. The X-ray structural characterization of complexes 1-4 shows the presence of a discrete decameric water cluster built around a cyclic hexameric core stabilized by the solid-state structure, which represents another new mode of association of water molecules. The Ln3+-Cr3+ magnetic interaction is negligible in 6 and 12, antiferromagnetic in 2, 4', 7, 8, 9, 10, and 11, and unresolved for 3. The complex 5 is a ferrimagnet because its magnetic studies suggest the onset of a very weak ferromagnetic three-dimensional ordering.     

Study of the effects of operational parameters on multiresidue pesticide analysis by LC-MS/MS

In this paper, the influence of several operational parameters on a well established multiresidue LC-MS/MS method has been studied in relation to the analysis of 150 pesticides commonly present in vegetable samples. The operational parameters investigated are: (i) the influence of different modifiers (0.1% formic acid; 5 mM ammonium formiate; 5 mM ammonium acetate in aqueous phase) - both on the retention time and on the analytical response of the studied compounds; (ii) the effect of the analytical column's temperature on the retention time and on the analytical response of the pesticides investigated; (iii) the effects of co-elution in mixture containing 150 pesticides and, additionally, (iv) the carrying out of a study about the common transitions obtained by LC-MS/MS. Various common transitions were found among the 150 pesticides, but there were only two problematic cases, the pairs diuron-fluometuron and prometryn-terbutryn, which have common scanned transitions and have very close retention times. The use of ammonium salts as modifier instead of formic acid reports enhancement or suppression of the response depending on the pesticides. No great influence on the retention time or on the response of the pesticides and commodities studied was observed with relation to the column temperature. Two different columns: an HPLC (5 μm particle size) and an UHPLC analytical column (1.8 μm particle size) have been used. As was expected, shorter run times and lower peak width was achieved with the UHPLC column.In this paper, the effect of the compounds on each other in the MS analysis when the number of co-eluting compounds is quite high is also described. Mainly small suppression or enhancement co-elution effect was observed, but some particular pesticides presented high sensitivity (>±60% effect) when they elute together with others. This is an important factor and it has to be taken into account when performing multiresidue pesticide analysis.     

Determination of ethylene glycol dinitrate in dynamites using HPLC: application to the plastic explosive Goma-2 ECO

In this study, a sequential extraction method using water and methanol to recover ethylene glycol dinitrate or nitroglycol (EGDN) contained in Goma-2 ECO dynamite was developed. After, an HPLC method was used for the determination of EGDN in the two extracted phases. The analytical method was validated by evaluating its selectivity, sensitivity, linearity, and linear working concentration range, limit of detection and quantitation, precision (as repeatability and intermediate precision), accuracy, and robustness, providing appropriate values (i.e. RSD values for precision about 6% and accuracy about 100%). Finally, the EGDN content of a sample of the Goma-2-ECO dynamite was determined obtaining a concentration of 30.29%, which is in accordance with the manufacturer's specifications for this dynamite (25.7-31.4%).     

Stable N-heterocyclic carbene (NHC)-palladium(0) complexes as active catalysts for olefin cyclopropanation reactions with ethyl diazoacetate

The Pd(0) complexes [(NHC)PdL(n)] (NHC=N-heterocyclic carbene ligand; L=styrene for n=2 or PR(3) for n=1) efficiently catalyse olefin cyclopropanation by using ethyl diazoacetate (EDA) as the carbene source with activities that improve on previously described catalytic systems based on this metal. Mechanistic studies have shown that all of these catalyst precursors deliver the same catalytic species in solution, that is, [(IPr)Pd(sty)], a 14e(-) unsaturated intermediate that further reacts with EDA to afford [(IPr)Pd(=CHCO(2)Et)(sty)], from which the cyclopropane is formed.     

Overcoming matrix effects using the dilution approach in multiresidue methods for fruits and vegetables

During recent years matrix effects in liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) have quickly become a major concern in food analysis. The phenomenon of ion suppression can lead to errors in the quantification of the analytes of interest, as well as can affect detection capability, precision, and accuracy of the method. Sample dilution is an easy and effective method to reduce interfering compounds, and so, to diminish matrix effects. In this work, matrix effects of 53 pesticides in three different matrices (orange, tomato and leek) were evaluated. Several dilutions of the matrix were tested in order to study the evolution of signal suppression. Dilution of the extracts led to a reduction of the signal suppression in most of the cases. A dilution factor of 15 demonstrated to be enough to eliminate most of the matrix effects, opening the possibility to perform quantification with solvent based standards in the majority of the cases. In those cases where signal suppression could not be reduced, a possible solution would be to use stable isotope-labelled internal standards for quantification of the problematic pesticides.     

Friedel-Craft acylation of ar-himachalene: synthesis of acyl-ar-himachalene and a new acyl-hydroperoxide

Friedel-Craft acylation at 100 °C of 2,5,9,9-tetramethyl-6,7,8,9-tetrahydro-5H-benzocycloheptene [ar-himachalene], a sesquiterpenic hydrocarbon obtained by catalytic dehydrogenation of α-, β- and γ-himachalenes, produces a mixture of two compounds: (3,5,5,9-tetramethyl-6,7,8,9-tetrahydro-5H-benzocyclohepten-2-yl)-ethanone (2, in 69% yield), with a conserved reactant backbone, and 3, with a different skeleton, in 21% yield. The crystal structure of 3 reveals it to be 1-(8-ethyl-8-hydroperoxy-3,5,5-trimethyl-5,6,7,8-tetrahydronaphthalen-2-yl)-ethanone. In this compound O-H…O bonds form dimers. These hydrogen-bonds, in conjunction with weaker C-H…O interactions, form a more extended supramolecular arrangement in the crystal.     

Design, synthesis, characterization, luminescence and non-linear optical (NLO) properties of multinuclear platinum(II) alkynyl complexes

A series of luminescent multinuclear platinum(II) alkynyl complexes containing triethynylbenzene or 1,4-bis(3,5-diethynylphenyl)buta-1,3-diyne as cores has been successfully synthesized and characterized. The electronic absorption, emission, nanosecond transient absorption and electrochemical properties of these complexes have been reported. These complexes show long-lived emissions in degassed benzene solution and in alcoholic glass at 77 K. Moreover, they are found to exhibit two-photon absorption (2PA) and two-photon induced luminescence (TPIL) properties, and their two-photon absorption cross-sections have been determined to be 6-191 GM upon excitation at 720 nm. Through a systematic comparison, it has been found that tetra- and hexanuclear platinum(II) complexes show better 2PA and TPIL properties than their di- and trinuclear counterparts.     

Investigation of thermal stability, spectral, magnetic, and antimicrobial behavior for new complexes of Ni(II), Cu(II), and Zn(II) with a bismacrocyclic ligand

Novel complexes of type M₂LCl₄·nH₂O (M: Ni, n = 4; M: Cu, n = 2.5 and M: Zn, n = 1.5; L: ligand resulted from 1,3-phenylenediamine, 3,6-diazaoctane-1,8-diamine, and formaldehyde one-pot condensation) were synthesized and characterized. The ligand was also isolated and characterized. The complexes features have been assigned from microanalytical, electrospray ionization tandem mass spectrometry, IR, UV–vis, ¹H NMR, and EPR spectra as well as magnetic data at room temperature. Simultaneous thermogravimetric/dynamic scanning calorimetry/evolved gas analysis measurements were performed to evidence the nature of the gaseous products formed in each step. Processes as water elimination, fragmentation, and oxidative degradation of the organic ligand as well as chloride elimination were observed during the thermal decomposition. The final product of decomposition was metal(II) oxide except for copper complex where CuCl remained also in the oxide network. The complexes exhibited an improved antibacterial activity in comparison with the ligand concerning both planktonic as well as biofilm-embedded cells.