On the Reaction Mechanism of the Complete Intermolecular O2 Transfer between Mononuclear Nickel and Manganese Complexes with Macrocyclic Ligands

The recently described intermolecular O₂ transfer between the side‐on Ni‐O₂ complex [(12‐TMC)Ni‐O₂]⁺ and the manganese complex [(14‐TMC)Mn]²⁺, where 12‐TMC and 14‐TMC are 12‐ and 14‐membered macrocyclic ligands, 12‐TMC=1,4,7,10‐tetramethyl‐1,4,7,10‐tetraazacyclododecane and 14‐TMC=1,4,8,11‐tetramethyl‐1,4,8,11‐tetraazacyclotetradecane, is studied by means of DFT methods. B3LYP calculations including long‐range corrections and solvent effects are performed to elucidate the mechanism. The potential energy surfaces (PESs) compatible with different electronic states of the reactants have been analyzed. The calculations confirm a two‐step reaction, with a first rate‐determining bimolecular step and predict the exothermic character of the global process. The relative stability of the products and the reverse barrier are in line with the fact that no reverse reaction is experimentally observed. An intermediate with a μ‐η¹:η¹‐O₂ coordination and two transition states are identified on the triplet PES, slightly below the corresponding stationary points of the quintet PES, suggesting an intersystem crossing before the first transition state. The calculated activation parameters and the relative energies of the two transition sates and the products are in very good agreement with the experimental data. The calculations suggest that a superoxide anion is transferred during the reaction.     

Study of the effects of operational parameters on multiresidue pesticide analysis by LC-MS/MS

In this paper, the influence of several operational parameters on a well established multiresidue LC-MS/MS method has been studied in relation to the analysis of 150 pesticides commonly present in vegetable samples. The operational parameters investigated are: (i) the influence of different modifiers (0.1% formic acid; 5 mM ammonium formiate; 5 mM ammonium acetate in aqueous phase) - both on the retention time and on the analytical response of the studied compounds; (ii) the effect of the analytical column's temperature on the retention time and on the analytical response of the pesticides investigated; (iii) the effects of co-elution in mixture containing 150 pesticides and, additionally, (iv) the carrying out of a study about the common transitions obtained by LC-MS/MS. Various common transitions were found among the 150 pesticides, but there were only two problematic cases, the pairs diuron-fluometuron and prometryn-terbutryn, which have common scanned transitions and have very close retention times. The use of ammonium salts as modifier instead of formic acid reports enhancement or suppression of the response depending on the pesticides. No great influence on the retention time or on the response of the pesticides and commodities studied was observed with relation to the column temperature. Two different columns: an HPLC (5 μm particle size) and an UHPLC analytical column (1.8 μm particle size) have been used. As was expected, shorter run times and lower peak width was achieved with the UHPLC column.In this paper, the effect of the compounds on each other in the MS analysis when the number of co-eluting compounds is quite high is also described. Mainly small suppression or enhancement co-elution effect was observed, but some particular pesticides presented high sensitivity (>±60% effect) when they elute together with others. This is an important factor and it has to be taken into account when performing multiresidue pesticide analysis.     

An ab initio analysis of the electronic structure and harmonic frequencies of nickel porphyrin

Ab initio calculations are performed to understand the geometry, electronic structure, and vibrational frequencies of nickel porphyrin (NiP). Hartree-Fock (HF) and second-order perturbation (MP2) theories are applied with polarized basis sets. The calculated geometrical parameters are in very good agreement with the crystal structure determination. The electronic structure and bonding are analyzed in terms of complexation and correlation effects. Not unexpectedly, the HF depiction of the metal-porphyrin interaction is rather ionic while ligand σ donation is dominant at the MP2 level. Scaled HF frequencies of NiP and its isotopomers are in very good agreement with observed infrared and resonance Raman data. Received: 7 January 1997 / Accepted: 6 May 1997     

Stereoselective syntheses of polyhydroxylated azepane derivatives from sugar-based epoxyamides. Part 1: synthesis from d-mannose

An approach to the synthesis of polyhydroxyazepane derivatives from sugar-based epoxyamides or epoxyalcohols, in which the total regioselective epoxide opening by nitrogen nucleophiles is the key step, is described. Thus, novel polyhydroxyazepane carboxamides and aminomethyl polyhydroxyazepanes, with potential pharmacological interest, are synthesized from diacetone d-mannose. Configurational assignments of the obtained products were determined.     

Fatty Acid Carboxylate‐ and Anionic Surfactant‐Controlled Delivery Systems That Use Mesoporous Silica Supports

We report the preparation of a MCM‐41 mesoporous material that contains the dye [Ru(bipy)₃]Cl₂ (bipy=bipyridine) inside the mesopores and functionalised with suitable binding groups at the entrance of the pores. Solids S1 – S3 were obtained by the reaction of the mesoporous material with N‐methyl‐N′‐propyltrimethoxysilylimidazolium chloride, N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]thiourea, or N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]urea, respectively. A study of the dye delivery of these systems in buffered water (pH 7.0, 2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]ethanesulfonic acid (HEPES), 10^?3 mol dm^?3) in the presence of a family of carboxylate ions was carried out. In the interaction of the anions with the surface of the solids, the response depends on the characteristics of the binding groups (i.e., imidazolium, urea and thiourea) at the pore outlets and their specific interaction with the corresponding anion. The interaction of long‐chain carboxylate ions with the binding sites at the surface of the solids resulted in a remarkable inhibition of the delivery of the dye. This inhibition was observed clearly for the dodecanoate anion, whereas the octanoate, decanoate, cholate, deoxycholate, glycodeoxycholate and taurocholate anions induced a certain pore blockage that varied according to the solid studied. The interaction of smaller anions, such as acetate, butanoate, hexanoate and octanoate, with the solids had no effect on the dye release process. The possible use of the gating system for the chromo‐fluorogenic detection of anionic surfactants through selective dye delivery inhibition was also explored. Molecular dynamic simulations that use force‐field methods have been made to theoretically study the capping carboxylate mechanism. The calculations are in agreement with the experimental results, thus allowing a representation of the dye delivery inhibition in the presence of long‐chain carboxylate ions.     

Magnetic Hyperthermia Enhancement in Iron-based Materials Driven by Carbon Support Interactions

Magnetic hyperthermia (MH) shows great potential in clinical applications because of its very localized action and minimal side effects. Because of their high saturation magnetization values, reduced forms of iron are promising candidates for MH. However, they must be protected in order to overcome their toxicity and instability (i. e., oxidation) under biological conditions. In this work, a novel methodology for the protection of iron nanoparticles through confinement within graphitic carbon layers after thermal treatment of preformed nanoparticles supported on carbon is reported. We demonstrate that the size and composition of the nascent confined iron nanoparticles, as well as the thickness of their protective carbon layer can be controlled by selecting the nature of the carbon support. Our findings reveal that a higher nanoparticle–carbon interaction, mediated by the presence of oxygen-containing groups, induces the formation of small and well-protected α-Fe-based nanoparticles that exhibit promising results towards MH based on their enhanced specific absorption rate values.     

Mixed fluoroamine complexes of chromium(III)

Summary Mixed difluoro(diamine)(diamme)chromium(III) complexes have been synthesized with ethylenediamine (en), 1,3 propanediamine(tn) and 1,2-cyclohexanediamine(chxn):trans-[CrF₂(aa)(bb)]Br (aa=en, bb=tn; aa=tn, bb= chxn) andcis-[CrF₂(aa)(bb)]Br (aa=en, bb=chxn). The corresponding fluoroaqua(diamine) (diamine)chromium(III) complexes have been prepared by acid hydrolysis as perchlorate or iodide salts. All have been characterized by chemical analysis, electronic and i.r. spectra and conductivity measurements.     

Spektroskopisches und thermisches Verhalten von K4H2[S2I2O14]

The infrared andRaman spectra of the tittle compound have been recorded and an assignment for the internal vibrations of the H₂S₂I₂O ₁₄ ^4– polyanion is proposed. The thermal behaviour was investigated using TG-, DTA-, IR- and X-ray methods; it is shown that the polyanion breaks down after the release of one mole of H₂O, generating a mixture of -K₂SO₄ and I₂O₅.

     

Synthesis of 4-substituted 5,6-diphenylmorpholine-2,3-diones with two or three chiral centers

Chiral α-aminoalcohols obtained by stereoselective reduction of α-iminoketones have been condensed with oxalyl chloride to afford 4-substituted 5,6-diphenylmorpholine-2,3-diones having two or three chiral centers.