Natural Polymers-Based Materials: A Contribution to a Greener Future

Natural polymers have emerged as promising candidates for the sustainable development of materials in areas ranging from food packaging and biomedicine to energy storage and electronics. In tandem, there is a growing interest in the design of advanced materials devised from naturally abundant and renewable feedstocks, in alignment with the principles of Green Chemistry and the 2030 Agenda for Sustainable Development. This review aims to highlight some examples of the research efforts conducted at the Research Team BioPol4fun, Innovation in BioPolymer-based Functional Materials and Bioactive Compounds, from the Portuguese Associate Laboratory CICECO–Aveiro Institute of Materials at the University of Aveiro, regarding the exploitation of natural polymers (and derivatives thereof) for the development of distinct sustainable biobased materials. In particular, focus will be given to the use of polysaccharides (cellulose, chitosan, pullulan, hyaluronic acid, fucoidan, alginate, and agar) and proteins (lysozyme and gelatin) for the assembly of composites, coatings, films, membranes, patches, nanosystems, and microneedles using environmentally friendly strategies, and to address their main domains of application.     

Configurational and conformational control of chemical modification and thermal degradation of poly(vinyl chloride)

In the light of some earlier works on nucleophilic substitution on poly(vinyl chloride) (PVC) in solution, a conformational mechanism is proposed. It considers the TT isotactic diad conformation to be the only reactive species and the reaction to be controlled by the conformational equilibria that make such conformation available. As a result all the isotactic and the heterotactic triads are capable of reacting provided that they adopt the GTTG⁻ and the GTTT conformation, respectively. Since the replacement of a definite fraction of isotactic triads, which are assumed to be of the GTTG⁻ conformation, results in an enhanced thermal and photochemical stability, the lability of some chlorines at such triads is proved. Further arguments in favour of the conformational mechanism are afforded through recent results of i) substitution studies in the melt and in aqueous suspension with phase transfer catalysts, ii) accurate ¹³C NMR measurements of triad variation with degree of substitution.     

Use of phase diagrams in the analysis of polymer network formation

A conversion - temperature - transformation (CTT) diagram was used to analyze several non-isothermal processes of polymer network formation: a) range of heating rates where reliable kinetic information can be obtained; b) a novel process involving part of the cure in the glassy state; c) phase separation in rubber-modified epoxies cured in heated molds.     

Liquid chromatography with ultraviolet absorbance detection for the analysis of tetracycline residues in honey

The separation of tetracyclines (TCs) using reversed-phase liquid chromatography (LC) is proposed. The use of an amide-based stationary phase prevents the interaction of tetracyclines with the residual silanol groups and thus avoids the appearance of tailed peaks. Detection was based on using an UV spectrophotometer and gradient elution with acetonitrile-oxalic acid as mobile phase permitted good separation of all the peaks. Specificity was demonstrated by the retention characteristics, UV spectra and peak purity index. Linearity, precision, recovery and sensitivity were satisfactory. The procedure was applied to the analysis of tetracycline residues (tetracycline, oxytetracycline (OTC), chlortetracycline (CTC), doxycycline (DC), minocycline (MINO) and methacycline (MTC)) in honey of different types. Extraction involved using a mild acidic solvent containing EDTA to release protein-bound or sugar-bound tetracyclines. For the clean-up step, solid phase extraction using phenyl cartridges was applied. Detection limits in the honey using the proposed procedure are between 15 and 30 ng g(-1), depending on the tetracycline.     

Instrumental modification intended to save time,and volumes of sample and reagent solutions,in the atomic fluorescence spectrometric determination of mercury

Use of small membrane pumps, instead of peristaltic pumps, to introduce sample and reagent solutions into the spectrometer has several advantages in atomic fluorescence spectrometric determination of mercury. This simple modification results in a substantial saving in the time required for the measurements and so 90% of reagent solution volumes and 95% of sample solution volumes are saved, with a consequent decrease in the volume of waste generated. The sampling frequency is almost tripled, with no deterioration in sensitivity, which is similar to that obtained by use of peristaltic pumps. The relative standard deviation for ten consecutive measurements of a 1 μg L⁻¹ mercury solution was approximately 2%. Figure Small membrane pumps for the atomic fluorescene spectro metric determination of mercury     

Molecularly imprinted capillary electrochromatography for selective determination of thiabendazole in citrus samples

In this work, the suitability of the combination of molecular imprinting and capillary electrochromatography (MIP-CEC) to be used as powerful tool in environmental or food analysis has been for the first time studied and successfully demonstrated. A molecularly imprinted monolith (MIM) has been synthesised and evaluated as stationary phase for the selective determination of the fungicide thiabendazole (TBZ) in citrus samples by non-aqueous capillary electrochromatography. The influence of the mobile phase composition, the voltage of the power supply and the separation temperature on the recognition of TBZ by the imprinted polymer has been evaluated, and the imprint effect in the MIM was clearly demonstrated. Once optimum recognition conditions were established, other variables affecting mechanical properties and chromatographic performance of MIM were adjusted using computational approach. The high selectivity achieved by the MIP-CEC developed procedure allowed unambiguous detection and quantification of TBZ in citrus samples by direct injection of the crude sample extracts, without any previous clean-up, in less than 6 min. The developed method was properly validated and the calculated detection limits were below the established maximum residue limits (MRLs), clearly demonstrating the suitability of the method to be used for the control of the selected fungicide.     

A Novel siloxane-containing dicarboxylic acid, 1,3-bis(p-carboxyphenylene-ester-methylene)tetramethyldisiloxane,and its derivatives: ester macrocycle and supramolecular structure with a copper complex

The new dicarboxylic acid, 1,3-bis(p-carboxyphenylene-ester-methylene)tetramethyldisiloxane (H₂L, 1) was obtained by treating 1,3-bis(chloromethyl)-1,1,3,3-tetramethyldisiloxane with a mixture of terephthalic acid and terephthalic acid sodium salt in a 1:1 ratio. In this approach, besides the desired compound 1 (33 wt % yield), the condensation cyclic dimer 2 (7 wt % yield) and an oligomer 3 (10 wt % yield) resulted. The reaction between dicarboxylic acid H₂L, where L is the carboxylate ligand, along with imidazole as co-ligand, and copper hydroxide resulted in the formation of a coordination compound [Cu(HIm)₄(H₂O)₂]L·4.5H₂O (4). Single-crystal X-ray crystallography has revealed that the crystal structure of 4 is a self-assembled H-bonded three-dimensional supramolecular structure. FTIR and NMR spectral techniques were also used to characterize the formed structures. Optical and thermal properties of all compounds were studied. The stability of the supramolecular structure in solution (methanol) and with temperature was studied using ATR-FTIR. The ability of the macrocycle 2 to bind potassium cations in solution was investigated by UV–vis spectrophotometry.