Ultrasound-assisted extraction of isoflavones from soy beverages blended with fruit juices

A new method for the fast determination of isoflavones from soy beverages blended with fruit juices without the need of freeze-drying the sample was developed. During the method development, several parameters were studied: solvent (methanol and ethanol), sample:solvent ratio (5:1 to 0.2:1), temperature (10-60 °C) and extraction time (5-30 min). The most important parameter for the extraction of isoflavones from soy drinks was the sample:solvent ratio. The optimized method consists of extracting the sample with ethanol with a sample:solvent ratio of 0.2:1 on an ultrasound bath at 45 °C during 20 min. Also, samples were freeze-dried, extracted using conventional method and compared with the optimized method and no significant difference was observed on total and individual isoflavone concentration. The most representative samples from the Spanish market, with a wide variation of isoflavone concentration were analyzed using the optimized method. Differences between manufacturers reached an almost 10 times fold variation. Overall isoflavone concentration ranged from 6.7 to 58.2 mg L⁻¹.     

Electrochemical and electron spin resonance studies of selected benzazolo[3,2-a]quinolinium salts

The electrochemical reduction of the chloride or perchlorate salts of benzazolo[3,2-a]quinolinium ion and several of its analogues is reported. The compounds studied are the perchlorate salt of 3-nitrobenzothiazolo-and 3-nitro-9-methoxybenzothiazolo[3,2-a]quinolinium, and the chloride salts of 7-ethyl-, 3-nitro-7-methyl-, 3-nitro-7-ethyl-, 3-nitro-7-isopropyl-, 3-nitro-7-butyl- and 3-nitro-7-benzylbenzimidazolo[3,2-a]-quinolinium, respectively. Cyclic voltammetry of the corresponding 3-nitrobenzothiazolo[3,2-a]quinolinium derivatives in N,N-dimethylformamide shows an irreversible peak potential at -0.6 and a quasi-reversible peak at -(1.2–1.3) volts, respectively, relative to the standard calomel electrode. In contrast, the corresponding 3-nitrobenzimidazolo[3,2-a]quinolinium derivatives show, in general, reversible peaks at near -0.8 and -(1.2–1.4) volts, respectively. Upon electrolytic reduction, only the nitro-substituted derivatives produced observable electron paramagnetic resonance electron spin resonance spectra. This observation is explained in terms of the stabilization of the radicals produced by the nitro group. Theoretical MM+/AM1/UHF calculations support the idea that the larger nitrogen splitting is caused by N-12 and the minor splittings by N-7 in the benzimidazolo[3,2-a]quinolinium ion series.     

The Boson peak interpretation and evolution in confined amorphous water

We study the evolution of the Boson peak for water confined in cement paste obtained by means of Inelastic Neutron Scattering from room temperature to the deep supercooled regime. We analyze the data in terms of a universal-like model, developed for glass forming liquids in the frame of the energy landscape. In such a way it is possible to discriminate between the fragile and strong glass forming character of supercooled liquids and the dynamical crossover, fragile to strong, between them. Hence, we confirm the link between the Boson peak and the water polymorphism. In particular, the main result is represented by a crossover from a local energetic minima configuration to that characteristic of saddle points on going towards the deep supercooled regime up to the dynamical arrest.     

A sinapic acid–calix[4]arene hybrid selectively binds Pb over Hg and Cd

The binding affinity for Pb²⁺, Cd²⁺ and Hg²⁺ of the sinapic acid–calix[4]arene hybrid 2, having four sinapyl pendants at the upper rim, has been investigated via an UV–Vis study. Compound 2 has better complexing ability than the monomeric p-phenetidine derivative 1. This highlights that the clustering of sinapyl units in a basket-like structure, dictated by the calixarene scaffold, greatly enhances the complexing properties. Ligand 2 forms complexes even with Hg²⁺, which is not complexed by 1 at all; the complexes formed by 2 with Pb²⁺ and Cd²⁺ are much stronger than the analogous complexes formed by 1. The UV–Vis investigation shows that the hybrid 2 markedly favors Pb²⁺ over Cd²⁺ and Hg²⁺. Information on the structural properties of the complex species was obtained by ¹H NMR spectroscopy. NMR data show that all three metal ions are placed into the cavity consisting of the calixarene scaffold and the sinapyl pendants, though their binding affects the coordinating regions to a different extent.     

Photodegradation of 2-chloro substituted phenothiazines in alcohols

The mechanisms that trigger the phototoxic response to 2-chlorophenothiazine derivatives are still unknown. To better understand the relationship between the molecular structure of halogenated phenothiazines and their phototoxic activity, their photophysics and photochemistry were studied in several alcohols. The photodestruction quantum yields were determined under anaerobic conditions using monochromatic light (313 nm). Absorption- and emission-spectroscopy, ¹H- and ¹³C-NMR and GC-MS were used to characterize the photoproducts and reference compounds. An electron transfer mechanism had been previously proposed by Bunce et al . ( J. Med. Chem . 22 , 202–204) to explain the large difference between the photodestruction quantum yield of 2-chlorpromazine (φ = 0.46) and 2-chlorphenothiazine (φ = 0.20). According to these authors, the alkylamino chain transfers an electron to the phenothiazine moiety. Our results demonstrate that this mechanism is incorrect, because the photodestruction quantum yields of all chlorinated derivatives of this study are the same under the same conditions of solvent and irradiation wavelength. The quantum yield has no dependence on the 10-substituent, but it depends on the solvent. The percentage of each photoproduct, on the other hand, strongly depends on that substituent, but not very much on the solvent. Finally, it is demonstrated that the phototoxic effect of chlorinated phenothiazines is not related to the photodechlorination, although both processes share the same transient.     

Optimal designs for weighted rational models

This paper is concerned with constructing optimal designs for rational models which are used for modeling problems in Agriculture and other disciplines. Homoscedastic and weighted models are considered. An analytical characterization of these designs is obtained as zeros of a polynomial solution of a second order differential equation.     

Strategy-proof coalition formation

We analyze coalition formation problems in which a group of agents is partitioned into coalitions and agents’ preferences only depend on the coalition to which they belong. We study rules that associate to each profile of preferences a partition of the society. We focus on strategy-proof rules on restricted domains of preferences, as the domains of additively representable or separable preferences. In such domains, the only strategy-proof and individually rational rules that satisfy either a weak version of efficiency or non-bossiness and flexibility are single-lapping rules. Single-lapping rules are characterized by severe restrictions on the set of feasible coalitions that are consistent with hierarchical organizations. These restrictions are necessary and sufficient for the existence of a unique core-stable partition. In fact, single-lapping rules always select the associated unique core-stable partition. Thus, our results highlight the relation between the non-cooperative concept of strategy-proofness and the cooperative concept of uniqueness of core-stable partitions.     

Base-displaced intercalated structure of the food mutagen 2-amino-3-methylimidazo[4,5-f]quinoline in the recognition sequence of the NarI restriction enzyme, a hotspot for -2 bp deletions

The solution structure of the oligodeoxynucleotide 5'-d(CTCGGCXCCATC)-3'.5'-d(GATGGCGCCGAG)-3' containing the heterocyclic amine 8-[(3-methyl-3H-imidazo[4,5-f]quinolin-2-yl)amino]-2'-deoxyguanosine adduct (IQ) at the third guanine in the NarI restriction sequence, a hot spot for -2 bp frameshifts, is reported. Molecular dynamics calculations restrained by distances derived from 24 (1)H NOEs between IQ and DNA, and torsion angles derived from (3)J couplings, yielded ensembles of structures in which the adducted guanine was displaced into the major groove with its glycosyl torsion angle in the syn conformation. One proton of its exocyclic amine was approximately 2.8 A from an oxygen of the 5' phosphodiester linkage, suggesting formation of a hydrogen bond. The carcinogen-guanine linkage was defined by torsion angles alpha' [N9-C8-N(IQ)-C2(IQ)] of 159 +/- 7 degrees and beta' [C8-N(IQ)-C2(IQ)-N3(IQ)] of -23 +/- 8 degrees . The complementary cytosine was also displaced into the major groove. This allowed IQ to intercalate between the flanking C.G base pairs. The disruption of Watson-Crick hydrogen bonding was corroborated by chemical-shift perturbations for base aromatic protons in the complementary strand opposite to the modified guanine. Chemical-shift perturbations were also observed for (31)P resonances corresponding to phosphodiester linkages flanking the adduct. The results confirmed that IQ adopted a base-displaced intercalated conformation in this sequence context but did not corroborate the formation of a hydrogen bond between the IQ quinoline nitrogen and the complementary dC [Elmquist, C. E.; Stover, J. S.; Wang, Z.; Rizzo, C. J. J. Am. Chem. Soc. 2004, 126, 11189-11201].     

Determination of benzene in gasoline using direct injection-mass spectrometry

A high-speed determination of benzene in gasoline samples using a non-separative method based on direct injection into the mass spectrometer is proposed. The results obtained are very similar to those provided with fast GC-MS.The calibration set was made up of gasoline samples in which the benzene was determined chromatographically and samples of gasoline subjected to a process of evaporation - until the complete disappearance of the original benzene - to which known concentrations of this compound had been added. A PLS1 multivariate calibration model was constructed. Cross-validation was used to select the optimum number of PLS components. The prediction capacity of the model was checked with an additional group of gasoline samples that had not been used either in the construction or in the validation of the model.With the direct injection method proposed here it was possible to analyse 24 samples over a period of 1 h. The direct injection method is rapid, simple and - in view of the results - highly suitable for the determination of benzene in gasoline samples.