A Covalent Binding Mode of a Pyrazole-Based CD38 Inhibitor

Brain concentrations of nicotinamide adenine dinucleotide (NAD⁺), an important cellular co-factor, tend to decrease with age and in neurodegeneration. As the NADase cluster of differentiation 38 (CD38) significantly contributes to NAD⁺ consumption, we reasoned that CD38 inhibition may be of therapeutic value for CNS disorders. The new pyrazole compound was designed based on a known CD38 inhibitor and showed good inhibitory potency. Several attempts to co-crystallise this pyrazole with CD38 and cyclic adenosine diphosphate ribose (cADPR) culminated in a high-resolution X-ray structure, in which the pyrazolyl group in the new compound formed a covalent bond with one of the ribosyl units of cADPR. This reaction proceeded under retention of configuration and resulted in a neutral ribosyl-pyrazole conjugate that is embedded within the active site of the enzyme. An analysis of this structural complex gave rise to design principles that enabled the preparation of more potent CD38 inhibitors with drug-like properties.     

Colloidal properties of rubber latex

Summary This work describes the dialysis, the determination of the total soap content in the latex system by conductometric titration, the effect of dilution on soap distribution between the aqueous and polymer phases, the confirmation of the average diameter of the latex particles, the electrophoretic behavior, and the establishment of the solids content below which the latex behaves according toBeer's law for the transmission of light. The colloidal system used in this study was a styrenebutadiene ( 11) latex (Naugatex 2740) with potassium salt of the disproportionated rosin (Dresinate 214) as emulsifier.

---

Zusammenfassung An einem Styrol-Butadien (11)-Latex (Naugatex 2740) mit dem Kaliumsalz von disproportioniertem Harz (Dresinate 214) als Emulgator wurden folgende Untersuchungen durchgeführt: Dialyse, konduktometrische Bestimmung der Gesamtkonzentration an Seife im Latex, Einfluß der Verdünnung auf die Verteilung der Seife zwischen wässeriger und polymerer Phase, Ermittlung des mittleren Durchmessers der Partikel und elektrophoretisches Verhalten. Weiterhin wurde noch festgestellt, bis zu welchem Feststoffgehalt dasBeersche Gesetz für die Latexssuspension gilt.

---

---

Supported by the U.S. Army Research Office (Durham), Grant No. DA-ARO(D)-31-124-G 656.

---

Part of a Ph. D. Thesis byC. G. Force.     

Comparison of monodisperse droplet generation in flow-focusing devices with hydrophilic and hydrophobic surfaces

A thin flow-focusing microfluidic channel is evaluated for generating monodisperse liquid droplets. The microfluidic device is used in its native state, which is hydrophilic, or treated with OTS to make it hydrophobic. Having both hydrophilic and hydrophobic surfaces allows for creation of both oil-in-water and water-in-oil emulsions, facilitating a large parameter study of viscosity ratios (droplet fluid/continuous fluid) ranging from 0.05 to 96 and flow rate ratios (droplet fluid/continuous fluid) ranging from 0.01 to 2 in one geometry. The hydrophilic chip provides a partially-wetting surface (contact angle less than 90°) for the inner fluid. This surface, combined with the unusually thin channel height, promotes a flow regime where the inner fluid wets the top and bottom of the channel in the orifice and a stable jet is formed. Through confocal microscopy, this fluid stabilization is shown to be highly influenced by the contact angle of the liquids in the channel. Non-wetting jets undergo breakup and produce drops when the jet is comparable to or smaller than the channel thickness. In contrast, partially-wetting jets undergo breakup only when they are much smaller than the channel thickness. Drop sizes are found to scale with a modified capillary number based on the total flow rate regardless of wetting behavior.     

Exploring the thermodynamic limits of computation in integrated systems: magnetic memory, nanomagnetic logic, and the Landauer limit

Nanomagnetic memory and logic circuits are attractive integrated platforms for studying the fundamental thermodynamic limits of computation. Using the stochastic Landau-Lifshitz-Gilbert equation, we show by direct calculation that the amount of energy dissipated during nanomagnet erasure approaches Landauer's thermodynamic limit of kTln(2) with high precision when the external magnetic fields are applied slowly. In addition, we find that nanomagnet systems behave according to generalized formulations of Landauer's principle that hold for small systems and generic logic operations. In all cases, the results are independent of the anisotropy energy of the nanomagnet. Lastly, we apply our computational approach to a nanomagnet majority logic gate, where we find that dissipationless, reversible computation can be achieved when the magnetic fields are applied in the appropriate order.     

Tris(triphenylphosphine)rhodium cyano and triphenylcyanoborate complexes: Structures and a DFT study

The structures of [Rh(CN)(PPh₃)₃](EtOH) (1), [Rh(NCBPh₃)(PPh₃)₃] (2), and [Rh(CNBPh₃)(PPh₃)₃] (3) are reported together with a density functional theory (DFT) study of the model compounds [Rh(NCBH₃)(PH₃)₃] and [Rh(CNBH₃)(PH₃)₃]. Compound 1 crystallizes in space group Pc with a = 10.4798(15) Å, b = 12.5410(18) Å, c = 19.974(3) Å and = 112.215(6)°; compound 2 crystallizes in space group with a = 12.929(2) Å, b = 14.362(2) Å, c = 17.575(3) Å and = 92.544(3)°, = 90.214(3)°, = 113.831(3)°; compound 3 crystallizes in space group with a = 12.915(2), b = 14.296(2), c = 17.664(3) Å and = 92.469(3)°, = 90.088(3)°, = 113.768(3)°. All three complexes show slight tetrahedral distortion from ideal square planar geometry (largest for 1). Differences in the reactivity and stability of 2 and 3 are interpreted according to the results of a density functional theory study.     

Niobium oxide solid catalyst: esterification of fatty acids and modeling for biodiesel production

Biodiesel can be obtained from fatty acid raw materials through esterification. The reactivity of lauric, palmitic, stearic, oleic, and linoleic fatty acids with methanol using powdered niobic acid as a heterogeneous catalyst was investigated in this work, both experimentally (in a batch reactor) and theoretically. A 2³ experimental design was used, with methanol/fatty acid molar ratio, catalyst concentration, and temperature as main factors. An empirical model demonstrated that temperature is the most important variable. Fourteen heterogeneous and 56 homogeneous‐like kinetic models were tested. A homogeneous‐like model considering zero order for all species and inhibition by water was the most adequate for experiments without catalyst. A homogeneous‐like model considering a second‐order reaction in relation to the fatty acid and no water inhibition was the most adequate for niobic acid catalyzed reaction. Molecular modeling confirmed the experimental results showing that the reactivity is directly related to the increase of unsaturated bonds and the reduction of carbon chain length. The polarity of the fatty acid is determinant in the reactivity. At the molecular level, reaction occurs between the HOMO orbital of methanol and LUMO orbitals of fatty acids and reactivity is higher when the energy difference between these orbitals is lower. Copyright © 2010 John Wiley & Sons, Ltd.     

Reaction of bis(phosphine)(hydrotris(3,5-dimethylpyrazolyl)borato)rhodium(I) with phenylacetylene,p-nitrobenzaldehyde,and triphenyltin hydride: structures of [Rh(Tp)(PPh(3))(2)], [Rh(Tp)(H)(C(2)Ph)(P(4-C(6)H(4)F)(3))], [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PPh(3))], and [Rh(Tp)(H)(SnPh(3))(PPh(3))

The complexes [Rh(Tp)(PPh(3))(2)] (1a) and [Rh(Tp)(P(4-C(6)H(4)F)(3))(2)] (1b) combine with PhC(2)H, 4-NO(2)-C(6)H(4)CHO and Ph(3)SnH to give [Rh(Tp)(H)(C(2)Ph)(PR(3))] (R = Ph, 2a; R = 4-C(6)H(4)F, 2b), [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PR(3))] (R = Ph, 3a), and [Rh(Tp)(H)(SnPh(3))(PR(3))] (R = Ph, 4a; R = 4-C(6)H(4)F, 4b) in moderate to good yield. Complexes 1a, 2b, 3a, and 4a have been structurally characterized. In 1a the Tp ligand is bidentate, in 2b, 3a, and 4a it is tridentate. Crystal data for 1a: space group P2(1)/c; a = 11.9664(19), b = 21.355(3), c = 20.685(3) A; beta = 112.576(7) degrees; V = 4880.8(12) A(3); Z = 4; R = 0.0441. Data for 2b: space group P(-)1; a = 10.130(3), b = 12.869(4), c = 17.038(5) A; alpha = 78.641(6), beta = 76.040(5), gamma = 81.210(6) degrees; V = 2100.3(11) A(3); Z = 2; R = 0.0493. Data for 3a: space group P(-)1; a = 10.0073(11), b = 10.5116(12), c = 19.874(2) A; alpha = 83.728(2), beta = 88.759(2), gamma = 65.756(2) degrees; V =1894.2(4) A(3); Z = 2; R = 0.0253. Data for 4a: space group P2(1)/c; a = 15.545(2), b = 18.110(2), c = 17.810(2) A; beta = 95.094(3) degrees; V = 4994.1(10) A(3); Z = 4; R = 0.0256. NMR data ((1)H, (31)P, (103)Rh, (119)Sn) are also reported.     

Minimal Informationally Complete Measurements for Pure States

We consider measurements, described by a positive-operator-valued measure (POVM), whose outcome probabilities determine an arbitrary pure state of a D-dimensional quantum system. We call such a measurement a pure-state informationally complete (PS I-complete) POVM. We show that a measurement with 2D−1 outcomes cannot be PS I-complete, and then we construct a POVM with 2D outcomes that suffices, thus showing that a minimal PS I-complete POVM has 2D outcomes. We also consider PS I-complete POVMs that have only rank-one POVM elements and construct an example with 3D−2 outcomes, which is a generalization of the tetrahedral measurement for a qubit. The question of the minimal number of elements in a rank-one PS I-complete POVM is left open.