Novel acrylic macromonomer with amphiphilic character derived from Triton X‐100: Radical copolymerization with methyl methacrylate and thermal properties

This article explores the synthesis of a novel methacrylic macromonomer with an amphiphilic character derived from poly(ethylene glycol) tert‐octylphenyl ether (MT) and its respective homopolymer. To know their reactivity in radical copolymerization reactions with methyl methacrylate (MMA), a model monomer (MTm) was synthesized to determine the reactivity ratios and compare them with the low molar fractions of copolymers of MT with MMA because they were difficult to isolate. They were r_MTm = 0.97 and r_MMA = 0.95. The compositional diagrams when representing the weight fraction of MT and MTm in the feed and the copolymer suggested that a clear correlation exists between the experimental points of the model monomer MTm and the macromonomer MT ones, suggesting that the length of the side poly(ethylene oxide) chain does not affect the reactivity of the methacrylic double bond in the prepared monomers for this type of polymerization reaction. The reactivity ratios of the copolymers have a tendency for the formation of random or Bernoullian copolymers. The glass‐transition temperatures (T_g's) of the prepared copolymers were determined by differential scanning calorimetry, deviated from the Fox equation, and discussed on the basis of treatments that consider the influence of the monomeric units along the copolymer chains, determining the T_g of the corresponding alternating dyads. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1641–1649, 2003     

Diphenylmethane transformations over boron trifluoride modified alumina and silica-alumina

Transformations of diphenylmethane were investigated in a flow system in the presence of alumina and silica-alumina modified with boron trifluoride at atmospheric pressure and elevated temperatures. Hydrogen transfer reaction was observed on addition of tetralin to the substrate stream. This revised version was published online in August 2006 with corrections to the Cover Date.     

Preparation and properties of homogeneous V2O5-SiO2 xerogel composite based on interpenetrating polymer network

In this paper, we report the conducting and electrochemical properties of a homogeneous V₂O₅-SiO₂ xerogel composite obtained from the simultaneous polymerization in both inorganic components (Si-O and V-O based polymers) forming an interpenetrating polymer network, where a mutual “solubility” due to cross-links and entanglements was observed. The presence of V₂O₅ inside the silica matrix has a strong effect on electrical conductivity; measurements showed room temperature conductivity almost 1000 times higher than what is found in the literature. In addition, the electrochemical behavior is quite similar to that found in V₂O₅ xerogel. Moreover, the effects of thermal treatment on the conducting and electrochemical properties were investigated. It was found that both properties were improved with no significant effect on V₂O₅ xerogel layered structure.     

Hydrophilic and hydrophobic copolymer systems based on acrylic derivatives of pyrrolidone and pyrrolidine

This article deals with the synthesis of hydrophilic methacrylic monomers derived from ethyl pyrrolidone [2‐ethyl‐(2‐pyrrolidone) methacrylate (EPM)] and ethyl pyrrolidine [2‐ethyl‐(2‐pyrrolidine) methacrylate (EPyM)] and their respective homopolymers. For the determination of their reactivity in radical copolymerization reactions, both monomers were copolymerized with methyl methacrylate (MMA), the reactivity ratios being calculated by the application of linear and nonlinear mathematical methods. EPM and MMA had ratios of r_EPM = 1.11 and r_MMA = 0.76, and this indicated that EPM with MMA had a higher reactivity in radical copolymerization processes than vinyl pyrrolidone (VP; r_VP = 0.005 and r_MMA = 4.7). EPyM and MMA had reactivity ratios of r_EPyM = 1.31 and r_MMA = 0.92, and this implied, as for the EPM–MMA copolymers, a tendency to form random or Bernoullian copolymers. The glass‐transition temperatures of the prepared copolymers were determined by differential scanning calorimetry (DSC) and were found to adjust to the Fox equation. Total‐conversion copolymers were prepared, and their behavior in aqueous media was found to be dependent on the copolymer composition. The swelling kinetics of the copolymers followed water transport mechanism case II, which is the most desirable kinetic behavior for a swelling controlled‐release material. Finally, the different states of water in the hydrogels—nonfreezing water, freezing bound water, and unbound freezing water—were determined by DSC and found to be dependent on the hydrophilic and hydrophobic units of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 395–407, 2003     

Diameter graphs of polygons and the proof of a conjecture of Graham

We show that for an n-gon with unit diameter to have maximum area, its diameter graph must contain a cycle, and we derive an isodiametric theorem for such n-gons in terms of the length of the cycle. We then apply this theorem to prove Graham's 1975 conjecture that the diameter graph of a maximal 2m-gon (m?3) must be a cycle of length 2m−1 with one additional edge attached to it.     

UPML formulation for truncating conductive media in curvilinear coordinates

This work presents a formulation based on UPML for truncating conductive media by using a local and non-orthogonal coordinate system to solve Maxwell’s equations by the FDTD method. The detailed procedure for obtaining the UPML equations for this case is shown and the complete equation set is provided.     

The prediction of coal properties using compressed infrared data from osculating polynomials

Reduction of the representation of infrared spectra from coal samples by osculating polynomials of degree nine is discussed. The reduced representation contains polynomial coefficients of order zero to four. Mathematical models of the original spectra are obtained by linear combination of the coefficients. These compressed models are statistically correlated to coal properties, namely, volatile matter, fixed carbon, ash content, heating value, hydrogen, carbon, sulphur, nitrogen, and maximum vitrinite reflectance, and the results are compared with those previously obtained from second derivatives of the same spectra. The use of compressed data, while giving slightly better correlations for some of the properties, has the advantage of requiring less computational time.     

In‐situ synthesis of transparent and conductive carbon nanotube networks

A method for the production of transparent carbon nanotube networks (CNTNs) over transparent substrates was developed. In this method, CNTNs were grown directly in the target surface by applying the catalyst in specific zones of the substrate through lithographic techniques. The networks can be also transferred from the original substrate to other surfaces. The newly grown carbon nanotubes have a very high aspect ratio (>50000). Thus far, networks with an optical transmittance of 94% at 550 nm and a surface resistivity of 3.6 kΩ/sq have been produced. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Elastic instability of the nano-structured state as an intrinsic probe to study the early formation stages of sol–gel derived (Pb<Subscript>1-x</Subscript>Ca<Subscript>x</Subscript>)TiO<Subscript>3</Subscript> thin films

A novel method to investigate the early formation stages of polycrystalline (Pb_1-xCa_x)TiO₃ (PCT) perovskite films by means of traditional Brillouin and micro-Brillouin spectroscopy (BS, mBS) is described in the present work. The films were prepared by chemical solution deposition (CSD) onto oxidized (100)Si substrates and treated at temperatures between 350–650 °C by rapid thermal processing (RTP). The elastic instability observed by Brillouin spectroscopy at the nano-structured state of the PCT films was used here to determine their crystallization temperatures. Coexistence of different nanocrystalline phases (e.g., pyrochlore, perovskite) in the films could also be detected by this technique. The reliability of these results is demonstrated by complementary information obtained by X-ray diffraction (XRD) and scanning force microscopy (SFM). The effects of the annealing temperature and of the Ca²⁺ content on the crystallization process of these films are also discussed. PACS 78.35.+c; 77.84.-s; 61.82.Rx