Thermochemical properties of benzoic acid derivatives VIII. Enthalpies of combustion and formation of o-, m-, and p- t-butylbenzoic acids

The enthalpies of formation in the crystalline state at 298.15 K of o-, m-, and p-t-butyl-benzoic acids have been determined by static-bomb calorimetry. Vapour-pressure determinations were made by the Knudsen-effusion technique and the sublimation enthalpies at the mean temperatures of the measurement ranges have been derived for the three acids. The values obtained are:

     

152.

Thermal characterization of UHMWPE stabilized with natural antioxidants     

M. Peltzer  J. R. Wagner  A. Jiménez 《Journal of Thermal Analysis and Calorimetry》2007,89(2):493-497

This work presents a study of the thermal degradation of ultra-high molecular mass polyethylene (UHMWPE) stabilized with natural (α-tocopherol and carvacrol) and synthetic antioxidants. Thermogravimetric analysis in dynamic mode was used to determine the apparent activation energies of different samples. The stabilization of UHMWPE with low concentrations (around 0.3%) of α-tocopherol is enough to obtain an efficient thermal performance of the polymer. Carvacrol is also a good stabilizer for UHMWPE, but at higher concentration than in the case of α-tocopherol. The comparison of apparent activation energy between samples with natural and synthetic antioxidants in similar concentration shows that α-tocopherol is a better stabilizer in terms of their thermal performance.     

153.

Preparation and Chemical and Biological Studies of the Novel Complex μ-1,4,5-triphenyl-1,3,4-triazole-2-thiolate-bis[dichlorotriethylphosphineplatinum(II)]a     

Wagner?M.?Teles  Flávia?C.?Machado  Carlos?A.?Montanari  Carlos?A.?L.?FilgueirasEmail author  Terence?C.?Jenkins 《Transition Metal Chemistry》2005,30(6):733-737

The mesoionic compound, 1,4,5-triazole-2-thiolate, is a versatile ligand, capable of binding metal centres in different ways. The present study shows how it reacts with the bridging platinum(II) complex μ-dichlorobis[(chlorotriethylphosphineplatinum(II)], [Pt₂(PEt₃)₂Cl₄], originating a bimetallic complex. Both the sulphur atom and nitrogen 3 behave as basic sites, coordinating different platinum centres. An interesting isomerization process, shown by ³¹P{¹H} n.m.r. spectroscopy, occurs at the S-bonded platinum moiety, resulting in a fluxional behaviour of the complex. It is also shown to target CT-DNA with moderate binding affinity.To the memory of Dr. Wagner M. Teles (1971–2004).     

154.

Reactions of tetracarbonylcobaltate(-I) with chlorosilanes in ether solvents     

Brian K. Nicholson  Jim Simpson 《Journal of organometallic chemistry》1978,155(2):237-244

The reactions of NaCo(CO)₄ with Me_nSiCl_4?n (n = 0–3) in diethylether (Et₂O) and in tetrahydrofuran (THF) have been studied. Three distinct reaction pathways were recognised which depend on the acidity of the chlorosilane and basicity of solvent. Attack at the silicon centre via the Co atom of Co(CO)₄^? leads to formation of a SiCo bond; reaction involving a CO ligand of Co(CO)₄^? gives clusters R₃SiOCCo₃(CO)₉; and chlorosilane induced attack of Co(CO)₄^? on the solvent gives products derived from THF molecules.     

155.

Synthesis and spectral properties of 2,3-dihydro-4-(para-substituted-phenyl)-7-[(o-, m-, and p-substituted)phenoxy]-1H-1,5-benzodi-azepine-2-thiones     

Eduardo CortS Corts  Carlos M. Alcocer Castrejn 《Journal of heterocyclic chemistry》1997,34(6):1809-1812

A series of twelve new 2,3-dihydro-4-(para-substituted-phenyl)-7-[(o-, m-, and p-substituted)phenoxy]-1H-1,5-benzodiazepine-2-thiones, which have potentially useful pharmacological properties, has been synthesized by condensing the 3,3-dimercapto-1-(para-substituted phenyl)-2-propen-1-one with 3,4-diaminophenyl-R-phenyl ethers. The structure of all products was corroborated by ir, ¹H-nmr, ¹³C-nmr and ms.     

156.

Theoretical strategy to provide atomistic models of comblike polymers: a generation algorithm combined with configurational bias Monte Carlo     

Curco D  Alemán C 《The Journal of chemical physics》2004,121(19):9744-9752

A computational strategy to model the amorphous phase of comblike polymers is presented. The strategy, denoted SuSi/CB (CB-configurational bias), combines the strength of an algorithm recently developed to generate reliable microstructures of dense amorphous polymers, which is based on a random search of energy minima, and configurational bias Monte Carlo method. The influence of different parameters used to define the characteristics of SuSi/CB on both the reliability of the generated structures and the computational effort has been examined in detail. Finally, we have modeled and characterized the supramolecular organization of poly(octadecyl acrylate) in the amorphous state.     

157.

Effect of oxidative stabilization on the electrochemical performance of carbon mesophases as electrode materials for lithium batteries     

A. Concheso  R. Santamaría  R. Menéndez  J. M. Jiménez-Mateos  R. Alcántara  P. Lavela  J. L. Tirado 《Journal of Solid State Electrochemistry》2005,9(9):627-633

The effect of oxidative stabilization as a mean to modify the carbon texture was essayed in a group of mesophases previous to carbonization at 900 °C with the aim of evaluating the influence on electrochemical performance when used as electrode materials in lithium test cells. X-ray diffraction, optical microscopy and chemical analysis, Fourier-transform infrared spectroscopy have been used to describe the compositional and textural properties of the as-produced parent mesophases, the samples were further treated under air current to stabilize their microstructures and the corresponding carbonized samples at 900 °C. The electrochemical performance was determined by the galvanostatic method and further correlated to the physical–chemical properties and interface resistance of the materials. In all cases, the stabilization process has demonstrated a beneficial effect on the capacity retention in the measured range.     

158.

A convenient enantioselective synthesis of (S)-alpha-trifluoromethylisoserine     

Avenoza A  Busto JH  Jiménez-Osés G  Peregrina JM 《The Journal of organic chemistry》2005,70(14):5721-5724

[reaction: see text] This report describes two straightforward synthetic methodologies to obtain alpha-CF3-isoserine, a new alpha,alpha-disubstituted beta-amino acid, from alpha-(trifluoromethyl)acrylic acid. The routes involve the synthesis of five-membered cyclic sulfates (using sulfuryl chloride) or sulfamidates (using the Burgess reagent) from the corresponding chiral diols, which are obtained by a catalytic asymmetric dihydroxylation (AD) reaction.     

159.

Electrodeposition of cobalt on stainless steel foils. Preparation of57Co sources for Mössbauer experiments     

R. González-Ramírez  H. Jiménez-Domínguez  O. Solorza-Feria  E. Ordóñez-Regil  A. Cabral-Prieto  S. Bulbulian 《Journal of Radioanalytical and Nuclear Chemistry》1993,174(2):291-298

Conditions for the electrodeposition of⁵⁹Co and⁵⁷Co on stainless steel foils have been studied. A set of electrolytic parameters has been determined to get a reasonably good electrodeposited sample. The⁵⁷Co electrodeposited foil was then introduced in a quartz tube to be annealed in an argon flow. The final product was a 11 Ci Mössbauer source for college experiments which was succesfully tested by obtaining spectra of stainless steel and sodium nitroprusside.     

160.

Differential pulse polarographic determination of salicylaldehyde as its Girard-P derivative     

Luís J. Moreno López  Manuel Callejón Mochón  Juán C. Jiménez Sánchez  Alfonso Guiraúm Pérez 《Mikrochimica acta》1996,124(3-4):187-194

A method for the determination of salicylaldehyde (2 × 10^–6–10^–4 M) by differential-pulse polarography, based on the in situ formation of its Girard-P derivative in aqueous solution at pH 2.5, is proposed. The relative standard deviation was 1.5% (ten determinations of 4 × 10^–5 M level). The applicability of this method was checked in synthetic samples containing salicyl alcohol,o-aminophenol, 2-methylphenol, salicylic acid and 4-aminobenzoic acid.     

[首页] « 上一页 [11] [12] [13] [14] [15] 16 [17] [18] [19] [20] [21] 下一页 » 末  页»

	$\text{ΔH}{}_{\mathrm{f}}{}^{\mathrm{o}}\text{(c, 298.15 K)/kJ mol}{}^{\mathrm{?1}}$	$\text{ΔH}{}_{\mathrm{s}}\text{/kJ mol}{}^{\mathrm{?1}}$
o-t-butylbenzoic acid	476.2 ± 1.9	99.8 ± 0.4	(at 314.6 K)
m-t-butylbenzoic acid	504.3 ± 1.6	103.0 ± 0.5	(at 326.5 K)
p-t-butylbenzoic acid	502.9 ± 1.7	103.8 ± 0.4	(at 334.1 K)

Thermal characterization of UHMWPE stabilized with natural antioxidants

This work presents a study of the thermal degradation of ultra-high molecular mass polyethylene (UHMWPE) stabilized with natural (α-tocopherol and carvacrol) and synthetic antioxidants. Thermogravimetric analysis in dynamic mode was used to determine the apparent activation energies of different samples. The stabilization of UHMWPE with low concentrations (around 0.3%) of α-tocopherol is enough to obtain an efficient thermal performance of the polymer. Carvacrol is also a good stabilizer for UHMWPE, but at higher concentration than in the case of α-tocopherol. The comparison of apparent activation energy between samples with natural and synthetic antioxidants in similar concentration shows that α-tocopherol is a better stabilizer in terms of their thermal performance.     

Preparation and Chemical and Biological Studies of the Novel Complex μ-1,4,5-triphenyl-1,3,4-triazole-2-thiolate-bis[dichlorotriethylphosphineplatinum(II)]a

The mesoionic compound, 1,4,5-triazole-2-thiolate, is a versatile ligand, capable of binding metal centres in different ways. The present study shows how it reacts with the bridging platinum(II) complex μ-dichlorobis[(chlorotriethylphosphineplatinum(II)], [Pt₂(PEt₃)₂Cl₄], originating a bimetallic complex. Both the sulphur atom and nitrogen 3 behave as basic sites, coordinating different platinum centres. An interesting isomerization process, shown by ³¹P{¹H} n.m.r. spectroscopy, occurs at the S-bonded platinum moiety, resulting in a fluxional behaviour of the complex. It is also shown to target CT-DNA with moderate binding affinity.To the memory of Dr. Wagner M. Teles (1971–2004).     

Reactions of tetracarbonylcobaltate(-I) with chlorosilanes in ether solvents

The reactions of NaCo(CO)₄ with Me_nSiCl_4?n (n = 0–3) in diethylether (Et₂O) and in tetrahydrofuran (THF) have been studied. Three distinct reaction pathways were recognised which depend on the acidity of the chlorosilane and basicity of solvent. Attack at the silicon centre via the Co atom of Co(CO)₄^? leads to formation of a SiCo bond; reaction involving a CO ligand of Co(CO)₄^? gives clusters R₃SiOCCo₃(CO)₉; and chlorosilane induced attack of Co(CO)₄^? on the solvent gives products derived from THF molecules.     

Synthesis and spectral properties of 2,3-dihydro-4-(para-substituted-phenyl)-7-[(o-, m-, and p-substituted)phenoxy]-1H-1,5-benzodi-azepine-2-thiones

A series of twelve new 2,3-dihydro-4-(para-substituted-phenyl)-7-[(o-, m-, and p-substituted)phenoxy]-1H-1,5-benzodiazepine-2-thiones, which have potentially useful pharmacological properties, has been synthesized by condensing the 3,3-dimercapto-1-(para-substituted phenyl)-2-propen-1-one with 3,4-diaminophenyl-R-phenyl ethers. The structure of all products was corroborated by ir, ¹H-nmr, ¹³C-nmr and ms.     

Theoretical strategy to provide atomistic models of comblike polymers: a generation algorithm combined with configurational bias Monte Carlo

A computational strategy to model the amorphous phase of comblike polymers is presented. The strategy, denoted SuSi/CB (CB-configurational bias), combines the strength of an algorithm recently developed to generate reliable microstructures of dense amorphous polymers, which is based on a random search of energy minima, and configurational bias Monte Carlo method. The influence of different parameters used to define the characteristics of SuSi/CB on both the reliability of the generated structures and the computational effort has been examined in detail. Finally, we have modeled and characterized the supramolecular organization of poly(octadecyl acrylate) in the amorphous state.     

Effect of oxidative stabilization on the electrochemical performance of carbon mesophases as electrode materials for lithium batteries

The effect of oxidative stabilization as a mean to modify the carbon texture was essayed in a group of mesophases previous to carbonization at 900 °C with the aim of evaluating the influence on electrochemical performance when used as electrode materials in lithium test cells. X-ray diffraction, optical microscopy and chemical analysis, Fourier-transform infrared spectroscopy have been used to describe the compositional and textural properties of the as-produced parent mesophases, the samples were further treated under air current to stabilize their microstructures and the corresponding carbonized samples at 900 °C. The electrochemical performance was determined by the galvanostatic method and further correlated to the physical–chemical properties and interface resistance of the materials. In all cases, the stabilization process has demonstrated a beneficial effect on the capacity retention in the measured range.     

A convenient enantioselective synthesis of (S)-alpha-trifluoromethylisoserine

[reaction: see text] This report describes two straightforward synthetic methodologies to obtain alpha-CF3-isoserine, a new alpha,alpha-disubstituted beta-amino acid, from alpha-(trifluoromethyl)acrylic acid. The routes involve the synthesis of five-membered cyclic sulfates (using sulfuryl chloride) or sulfamidates (using the Burgess reagent) from the corresponding chiral diols, which are obtained by a catalytic asymmetric dihydroxylation (AD) reaction.     

Electrodeposition of cobalt on stainless steel foils. Preparation of57Co sources for Mössbauer experiments

Conditions for the electrodeposition of⁵⁹Co and⁵⁷Co on stainless steel foils have been studied. A set of electrolytic parameters has been determined to get a reasonably good electrodeposited sample. The⁵⁷Co electrodeposited foil was then introduced in a quartz tube to be annealed in an argon flow. The final product was a 11 Ci Mössbauer source for college experiments which was succesfully tested by obtaining spectra of stainless steel and sodium nitroprusside.     

Differential pulse polarographic determination of salicylaldehyde as its Girard-P derivative

A method for the determination of salicylaldehyde (2 × 10^–6–10^–4 M) by differential-pulse polarography, based on the in situ formation of its Girard-P derivative in aqueous solution at pH 2.5, is proposed. The relative standard deviation was 1.5% (ten determinations of 4 × 10^–5 M level). The applicability of this method was checked in synthetic samples containing salicyl alcohol,o-aminophenol, 2-methylphenol, salicylic acid and 4-aminobenzoic acid.