Magnetic properties of Fe−Mn−Al alloy system in the FCC disordered phase

In this work we report the experimental studies of Fe?Mn?Al alloys in the FCC disordered phase at room temperature by Mössbauer spectroscopy and X-ray diffraction. In this phase the alloys are antiferromagnetic with a constant mean hyperfine field ( \(\bar H\) ) near 26 kOe in the composition range from 0 to 7.5 at.% Al and 50 to 65 at.% Fe. When the Al or Fe concentration increases, the \(\bar H\) value gradually decreases to zero and the alloy becomes paramagnetic. In the same way when the Al concentration increases the lattice parameter increases linearly but when the Fe concentration increases the lattice parameter remains nearly constant for alloys with 5 at.% Al and decreases for alloys with 10 at.% Al.     

Determination of the Enthalpies of Vaporization of Cyclic Organic Peroxides by Correlation of Changes in Gas Chromatographic Retention Times

Liquid and solid cyclic peroxides derived from aliphatic ketones are explosive materials so their enthalpies of vaporization and other thermodynamic or condensed-phase properties cannot be measured directly. In this work the enthalpies of vaporization of peroxides at 298.15 K were estimated simply from gas chromatographic retention times measured at different temperatures. The technique correlates changes in the retention times of compounds whose enthalpies of vaporization are known (called the reference series), with those of the compounds of interest. If t _R′ is the adjusted retention time (retention time of each compound minus the retention time of unretained diethyl ether, used as solvent) a plot of ln t _R′ against 1/T for each compound (reference compounds and cyclic peroxides) results in a straight line (r ² > 0.99 for all compounds). The enthalpy of transfer from solution to the vapor state (Δ_sol^g H _m) can be obtained by multiplying the slope by the gas constant (R). A second plot correlates the enthalpies of transfer from solution to the vapor state (Δ_sol^g H _m), as measured by gas–liquid chromatography (GLC), with enthalpies of vaporization of reference materials (Δ_vap H _m at 298.15 K) available in the literature. C₉–C₁₅ fatty acid methyl esters and hydrocarbons were used as reference compounds. The enthalpies of vaporization of the cyclic organic peroxides were calculated from the equation of the line obtained in this second correlation, the slope of which was Δ_vap H _m (at 298.15 K)/Δ^g _sol H _m. The experiments were performed under isothermal conditions with a DB-5 capillary column, flame-ionization detection (FID), and nitrogen as carrier gas. The column temperature was varied over a range of at least 30–70 K between 403 and 473 K, with chromatograms being acquired at 10 K intervals. Enthalpies of vaporization of cyclic organic peroxides are not available in the literature, and the values given in this paper, obtained by gas chromatography, are the first to be reported.     

Dérivés de la dihydro-2,4 triazole-1,2,4 thione-3 et de l'amino-2 thiadiazole-1,3,4 à partir de nouvelles thiosemicarbazones d'esters

A new general synthesis of 4,5-disubstituted 2,4-dihydro-1,2,4-triazole-3-thiones is proposed. These heterocycles are obtained by the action of primary amines, arylhydrazines or aroylhydrazines on the thiosemicarbazones of eaters. These last compounds are prepared by action of chlorhydrates of iminoethers on thiosemicarbazide in dimethylformamide. These thiosemicarbazones react also with strong acids, acid anhydrides and chlorides; by thermolysis and they give 2-amino-1,3,4-thiadiazole derivatives. Also, two derivatives of 1,2,4-triazolo[3,4-b]-1,3,4-thiadiazole have been prepared.     

Nitric oxide photorelease from ruthenium salen complexes in aqueous and organic solutions

The complexes [Ru(salen)(NO)Cl] and [Ru(salen)(NO)(H(2)O)](+) were shown to release the nitrosyl ligand as nitric oxide upon exposure to visible light in organic and aqueous solutions respectively, by means of UV-visible, EPR, and FTIR spectroscopies. The former was prepared by a new synthetic route and had its structure determined by single-crystal X-ray diffraction. A crystal of the dichloromethane solvate is orthorhombic, space group Fdd2 (No. 43) and formula C(16)H(14)ClN(3)O(3)Ru.CH(2)Cl(2), with Z = 16 and cell parameters a = 25.489(4), b = 33.435(4), and c = 9.3716(9) A. The electronic absorption spectra of the complexes were calculated using the INDO/S method. The water-soluble complex is a potential drug for antitumoral phototreatment.     

An efficient synthesis of acetylide/trimetal/acetylide molecular wires

Efficient syntheses are reported for incorporating trimetal units of the type M(3)(dpa)(4)(2+) (M = Cr, Co, Ni, and dpa = 2,2'-dipyridylamide) into polyalkynyl assemblies to give the prototypical bis-phenylacetylide complexes M(3)(dpa)(4)(CCPh)(2). Reactions of M(3)(dpa)(4)Cl(2) with LiCCPh have led only to mixtures of products which cocrystallize forming materials of the composition M(3)(dpa)(4)(CCPh)(x)()Cl(2)(-)(x)(). Here we report that acetonitrile complexes [M(3)(dpa)(4)(NCCH(3))(2)](PF(6))(2) react cleanly with LiCCPh in MeCN to afford the desired target molecules in 40-60% yield and in excellent purity. Isolation of the mixed ligand complex [Co(3)(dpa)(4)(NCCH(3))(CCPh)]PF(6) has been accomplished, which suggests that these reactions are stepwise and that it will be possible to synthesize mixed acetylide complexes (i.e., M(3)(dpa)(4)(CCR)(CCR')) via this method.     

Development of a quality control method for the characterization of oligonucleotides by capillary zone electrophoresis-electrospray ionization-quadrupole time of flight-mass spectrometry

A capillary zone electrophoresis-negative electrospray ionization-quadrupole time of flight-mass spectrometric method was developed for the characterization of oligonucleotides after synthesis, using model compounds. The major difficulty is the adduction of metal cations to the polyanionic backbone of the oligonucleotide sample, resulting in complex spectra and decreased sensitivity. Several approaches were investigated to circumvent this problem. Separation was performed in an ammonium carbonate buffer. During separation, the interfering metal ions were exchanged for ammonium ions, which are less tightly bound to the oligonucleotide when ionized. The influence of the addition of piperidine and imidazole or trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) to the running buffer for further reduction of cation adduction was investigated. Addition of CDTA to the buffer system resulted in a deconvoluted spectrum with very little adducts. On-line sample stacking proved vital to preconcentrate the samples. The pH and the concentration of the ammonium carbonate buffer as well as the electrophoresis voltage were optimized to achieve the best signal response for the oligonucleotides and a maximum reduction of the cation adducts as well as a short analysis time. Finally, the sheath liquid composition was examined for further improvement of the signal. The developed method was used to analyze different oligonucleotides (5000-9200 Da) in light of its use as a final quality control method for oligonucleotides in terms of purity and sequence homogeneity of the synthesized products. In all cases, very little adducts were observed in the deconvoluted spectra, and the relative errors of the measured molecular masses ranged from 3 to 35 ppm.     

Determination of zinc by flow injection with fluorimetric detection in a micellar medium

A room-temperature flow injection spectrofluorimetric method is presented for the determination of Zn(II), based on the use of salicylaldehyde thiocarbohydrazone in the presence of Triton X-100 and sodium acetate-acetic acid buffer. Various physical and chemical variables affecting the reaction in the flow system were evaluated. The proposed method is very selective. The calibration graph is linear over the range 10-1000 ng/ml, with a detection limit of 5 ng/ml and a relative standard deviation at the 50 ng/ml level of 1.8 %. The method was successfully applied to the determination of Zn(II) in drinking waters and biological samples.     

Antioxidant Activity of Polyphenols,from Mauritia flexuosa (Aguaje), Based on Controlled Dehydration

Plant polyphenols offer several benefits for the prevention of diverse illnesses. Fruit’s edible and inedible parts (pulp, seeds, peels, stems, flowers) are important sources of polyphenols. Different industrial processes for fruit treatment and commercialization affect the total polyphenol content (TPC), and probably the biological activity. The purpose of the present work was to determine the TPC and antioxidant activity (by DPPH) of polyphenols extracted from the pulp and seeds of Mauritia flexuosa (aguaje), in fresh and dehydrated forms, in order to determine the possible connection with the quantity of polyphenols and their specific antioxidant activity. The highest phenolic content for M. flexuosa seeds in fresh form (non-dehydrated) was 270.75 mg GAE/100 g with a 96-h extraction. With respect to the dehydrated samples, the best yield was quantified in the 96-h dehydrated seed sample. For all pulp and seeds, dehydrated for 24, 48, and 96 h, TPC showed a slightly decreasing pattern. The DPPH results were the highest in the 96-h dehydrated samples and the differences among all dehydrated pulp and seed samples were minimal. More studies testing the presence of other antioxidant components could help in understanding the detailed antioxidant activity, and related more to the specific action, rather than only total polyphenol content.