31P NMR spectroscopy as a powerful tool for the determination of enantiomeric excess and absolute configurations of alpha-amino acids

An easy method for the determination of the enantiomeric excess (ee) of mixtures of alpha-amino acids, and also for the elucidation of the absolute configuration of each component of the mixture, is reported. The method is based on the formation of diastereoisomers by reaction of the enantiomerically pure acetylacetonate derivative [Pd(acac-O,O')(P(2)-dach)]ClO(4) (4) [P(2)-dach = (1R,2R)-C(6)H(10)(NHPPh(2))(2)] with d,l-mixtures of alpha-amino acids AaH (Pd:AaH = 1:1 molar ratio, refluxing MeOH). The reaction occurs with protonation of the acac ligand and N,O-coordination of the amino acidate group, giving the corresponding [Pd(Aa-N,O)(P(2)-dach)]ClO(4) complexes l-5 and d-6. The composition of these mixtures of amino acidate complexes was analyzed by integration of the corresponding peaks (four doublets, two for each diastereomer) in their (31)P((1)H) NMR spectra. A series of 14 alpha-amino acids was studied (a, alanine; b, 2-aminobutyric acid; c, valine; d, phenylalanine; e, proline; f, leucine; g, isoleucine; h, norleucine; i, serine; j, threonine; k, methionine; l, aspartic acid; m, glutamine; n, cysteine), and excellent agreement between the expected values of ee and those obtained from integration of the (31)P((1)H) NMR spectra was obtained. Moreover, the position of the signals of each isomer is diagnostic, in such a way that the outer doublets are always due to the l-derivatives 5a-l, while the inner ones are due to the d-derivatives 6a-l, allowing the assignation of absolute configurations to each isomer in the mixture.     

The correlation of the stability constants of 1,3-dicarbonylic monochelates of Iron(III) with the acid dissociation constants of the ligand

The variation of the logrithms of stability constants of iron(III) monochelated compounds with structurally similar 1,3-dicarbonylic compounds has been found to be an essentially linear function of the negative logarithms of the acid ionization constant of the ligands. An analytical correlation which could be useful to predict equilibrium constants of iron(III) chelates has been developed. From spectrophotometric and potentiometric data a quantitative evaluation of the stability of the complex has been carried out. Results have provided information regarding substituent effects on the equilibrium constants.     

Synthesis of new colloidal formations during the strengthening of different activated hydrated metallurgical slags

This paper reports on a comparison of experimental researches on the hydration hardening of different types of dumped ferrous slag (DFS) (blast furnace, open hearth, electric steel and converter), non-activated and activated with small (2%) additions of Portland cement or lime. Activation was found to accelerate the strengthening processes in the early stages of hydration resulting from the growth of colloidal sol–gel new formations in a more alkaline environment. Over time, these formations became denser and transformed into stone-like amorphous materials with a uniaxial strength of up to 47.6 MPa at 1 year of age. All these types of slag can, therefore, be used in different applications, for example, like traditional binders, such as Portland cement, to different ceramic goods, new construction materials, etc. But till now the results of this research were used only for the preparing of binder materials for natural soils strengthening as road bases in Russia. Highways whose roadbeds were built with these DFS as binder materials have shown excellent performance indices in different parts of Russia, including Siberia and northern regions.     

The extraordinary ability of guanidinate derivatives to stabilize higher oxidation numbers in dimetal units by modification of redox potentials: structures of Mo(2)(5+) and Mo(2)(6+) compounds

Full characterization of the first homologous series of dimolybdenum paddlewheel compounds having electronic configurations of the types sigma(2)pi(4)delta(x), x = 2, 1, 0, and Mo-Mo bond orders of 4, 3.5, and 3, respectively, has been accomplished with the guanidinate-type ligand hpp (hpp = the anion of 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine). Essentially quantitative oxidation of Mo(2)(hpp)(4), 1, by CH(2)Cl(2) gives Mo(2)(hpp)(4)Cl, 2. The halide in 2 can be replaced by reaction with TlBF(4) to produce Mo(2)(hpp)(4)(BF(4)), 3. Further oxidation of 2 by AgBF(4) produces Mo(2)(hpp)(4)ClBF(4), 4. The change from bond order 4 (in 1) to 3.5 in Mo(2)(hpp)(4)Cl is accompanied by an increase in the Mo-Mo bond length of 0.061 to 2.1280(4) A. A further increase of 0.044 A in the Mo-Mo distance to 2.172(1) A is observed as the bond order decreases to 3 in 4. At the same time, the Mo-N distances decrease smoothly as the oxidation state of the Mo atoms increases. Electrochemical studies have shown two chemically reversible processes at very negative potentials, E(1)(1/2)= -0.444 V and E(2)(1/2)= -1.271 V versus Ag/AgCl. These correspond to the processes Mo(2)(6+/5+) and Mo(2)(5+/4+), respectively. The latter potential is displaced by over 1.5 V relative to those of the Mo(2)(formamidinate)(4) compounds and the first one has never been observed in such complexes. Thus, in surprising contrast to previously observed behavior of the dimolybdenum unit, when it is surrounded by the very basic guanidinate ligand hpp, there is an extraordinary stabilization of the higher oxidation numbers of the molybdenum atoms.     

Preliminary characterization of anhydrous ethanol used in Brazil as automotive fuel

This work reports preliminary studies on the characterisation of anhydrous ethanol (AEA) used as an automotive fuel mixed with gasoline in Porto Alegre (South Brazil). Pre-concentration of the impurities contained in 1000 ml of AEA was carried on through solid-phase extraction using XAD4 resin. The main compounds in the extract were identified by means of spectral data from the library of the equipment. The concentrate was then fractionated using a preparative liquid chromatographic column filled with activated silica gel and the elution procedure was carried out with, n-hexane, n-hexane-benzene (1:1, v/v) and dichloromethane. Prior to analysis by GC-MS, each fraction was reduced to 1 ml with a gentle stream of nitrogen. Saturated linear hydrocarbons and aromatic hydrocarbons eluted in the first fraction and oxygenated compounds such as aldehydes. ketones and alcohols, eluted in the second one. were the main compounds detected in the sample.     

Determination of moxifloxacin in tablets and human urine by square-wave adsorptive voltammetry

This work presents an electroanalytical methodology developed for square-wave voltammetry based in the electrochemical reduction in hanging mercury drop electrode (HMDE), which is simple, fast, reliable and sensitive for determination of moxifloxacin (MOXI) in tablets and spiked urine human samples. The support electrolyte that provided a more defined and intense peak current for MOXI determination was the phosphate buffer 0.04 mol l^{− 1} pH 8.0. In the best-optimized conditions the drug presented an only peak of reduction at − 1.38 V vs. Ag/AgCl, using an E_acc. of − 0.30 V. An LOD of 0.44 and 3.20 ng ml^{− 1} and an LOQ of 1.46 and 10.60 ng ml^{− 1} were found for the pure standard of moxifloxacin and in the presence of matrix, respectively. A good recovery was obtained for assay spiked urine samples and a good quantification of MOXI was achieved in a commercial formulation. The methodology proposed was more sensitive than the spectrofluorimetric and spectrophotometric method with precision and accuracy equivalent.     

A dominance-based rough set approach applied to evaluate the credit risk of sovereign bonds

4OR - Even though sovereign bonds represent low-risk alternatives that give investors a healthy income, the risk assessment process for these bonds is still considered subjective because of the...     

Chaos in classical cosmology (II)

We present a new dynamical calculation about the Friedman-Robertson-Walker universe considered as an autonomous Hamiltonian. The time evolution of this Hamiltonian presents numerical instabilities so we apply a symplectic integration via infinitesimal canonical transformations of the phase space time evolution that preserves the Poincaré invariant. In this way, we have also obtained a sensitive improvement in the accuracy of the Hamiltonian constraint, as well as in the computing time. We confirm our previous results; in a spatially closed universe, the route to chaos is reached by sucessive breakage of the resonant tori due to the action of 11 resonances.     

Spectrophotometric determination of zinc in copper-base alloys with TAN

TAN reacts with zinc(II) forming a red complex with composition 1:2 Zn(II)-TAN and absorption maximum at 582 nm. Zinc can be determined with this reagent in the presence of Triton X-100, in the pH range 6.20-8.00 with a molar absorptivity of 4.5×10⁴ l/mol/cm Beer's Law was obeyed up to least 1.55 g/ml. Copper interference was eliminated with a mixture of thiosulfate and ascorbic acid and nickel separated by precipitation with dimethylglyoxime. The proposed method was used for zinc determination in several copper-base alloys and the results of analysis in comparison with certified values indicated that the procedure was accurate and precise. A derivative procedure is also proposed, allowing zinc determination with high sensitivity (5-400 ng/ml).     

Determination of metal impurities in electrolytic iron by GF-AAS using electric dispersion in liquid medium

A laboratory-built electrospark system, operated in liquid medium, is used as dispersion method for metallic samples. The metallic colloidal solutions formed upon electrocorrosion behave as typical lyophobic colloidal systems, which are highly stable. The parameters influencing the formation of the colloidal solutions are optimized so that the electrospark system can be used in combination with graphite furnace-atomic absorption spectrometry for trace metal determinations. Dispersion rates for electrolytic iron range from 50 to 125 g min^–1, depending on the power. The colloidal solutions show the same atomization behaviour as true solutions, which makes calibration with aqueous standards feasible. The method has been used to determine manganese, chromium und copper in the NIST SRM 665 electrolytic iron.