GaAsN/AlAs/AlGaAs double barrier quantum wells grown by molecular beam epitaxy as an alternative to infrared absorption below 4 μm

In this work, we report on the design, growth and characterization of GaAsN/AlAs/AlGaAs double barrier quantum well infrared detectors to achieve intraband absorption below 4 μm. Due to the high effective mass of N-dilute alloys, it is common for these N-containing double barrier quantum well structures to have more than one bound state within the quantum well, enabling the possibility of achieving multispectral absorption from these confined levels to the quasi-bound. Based on a transfer matrix calculation we will study the influence of the potential parameters, in particular the well width and the introduction of a GaAs spacer layer in between the N-well and the AlAs barriers. We will compare the case in which there are two confined levels with the case in which only one level is bound, like in the conventional AlGaAs/AlAs/GaAs structures. On the basis of the simulation, we have grown and characterized some N-containing double barrier detectors. Moreover, an optimization of the post-growth annealing treatments of the GaAsN quantum well structures has also been performed. Finally, room temperature absorption measurements of both as-grown and annealed samples are presented and analyzed.     

The symmetric eigenvalue complementarity problem

In this paper the Eigenvalue Complementarity Problem (EiCP) with real symmetric matrices is addressed. It is shown that the symmetric (EiCP) is equivalent to finding an equilibrium solution of a differentiable optimization problem in a compact set. A necessary and sufficient condition for solvability is obtained which, when verified, gives a convenient starting point for any gradient-ascent local optimization method to converge to a solution of the (EiCP). It is further shown that similar results apply to the Symmetric Generalized Eigenvalue Complementarity Problem (GEiCP). Computational tests show that these reformulations improve the speed and robustness of the solution methods.

     

Heteroclinic orbits between rotating waves of semilinear parabolic equations on the circle

We investigate heteroclinic orbits between equilibria and rotating waves for scalar semilinear parabolic reaction-advection-diffusion equations with periodic boundary conditions. Using zero number properties of the solutions and the phase shift equivariance of the equation, we establish a necessary and sufficient condition for the existence of a heteroclinic connection between any pair of hyperbolic equilibria or rotating waves.     

Compositionally modulated Fermi surfaces, structured diffuse scattering and ternary derivatives of 1T-TaS2

Ternary derivatives of 1T-TaS₂ have been synthesized and the variation in the highly structured diffuse intensity distributions characteristic of such materials carefully monitored to investigate the effect that such substitution has upon the band structures and Fermi surfaces (FSs) of the materials. Removal of d electrons via the replacement of Ta ions with lower valent transition metal ions leads to a systematic increase in the radii of the characteristic structured diffuse intensity distribution. Extended Hückel tight binding calculations of the FSs of the doped samples are carried out and used to predict possible nesting wave-vectors. The results are in reasonably good agreement with the radii of the experimentally observed diffuse intensity distributions.     

Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

Über die ξ-Funktion einfacher hyperkomplexer Systeme

Ohne Zusammenfassung     

Additive-subtractive phase-modulated speckle interferometry: Fringe visibility under partial decorrelation

Additive-subtractive phase modulated speckle interferometry (ASPMSI) is a technique that minimizes the susceptibility of speckle methods to environmental noise while providing fringes of good visibility. The method requires the acquisition of two consecutive video frames of additive-speckle images of the same two deformed states of an object at a rapid enough rate such that ambient noise is not a problem. The additive-speckle images as expected are of very poor visibility due to the presence of the self-interference term. An interframe phase-modulation is introduced and the two additive-speckle images are digitally subtracted to improve the fringe visibility by removing the self-interference term. The ASPM-SI method works with in-plane and out-of-plane deformation sensitive ESPI as well as with displacement-gradient sensitive speckle-shearing interferometry. It is shown that the ASPM-SI scheme has higher visibility than conventional additive-SI and performs consistently better than subtractive-SI schemes in the presence of partial interframe speckle decorrelating optical noise. Furthermore, it is shown that the fringe visibility of the out-of-plane displacement sensitive interferometer which uses a protected reference beam separate from the object beam can be made to be essentially unity even at complete interframe decorrelation.     

The spin-S Blume-Capel RG flow diagram

Using the finite-size scaling renormalization group, we obtain the two-dimensional flow diagram of the Blume-Capel model forS=1 andS=3/2. In the first case our results are similar to those of mean-field theory, which predicts the existence of first- and second-order transitions with a tricritical point. In the second case, however, our results are different. While we obtain in theS=1 case a phase diagram presenting a multicritical point, the mean-field approach predicts only a second-order transition and a critical endpoint.     

Visualization of industrial engineering data in Augmented Reality

This paper presents an innovative application of Augmented Reality (AR) techniques in the field of industrial engineering in which the user explores data from numerical simulations or the results of measurements and experiments, superimposed to the real object that they refer to. The user observes the object through a tablet PC, used as a video see-through handheld display. Data are visualized superimposed to the real object that represents a spatial reference relative to which the user can refer to, so the exploration is more natural compared to a traditional visualization software. Moreover, we have developed a new framework, called VTK4AR, that provides a set of useful software classes for the rapid development of AR applications for scientific visualization. VTK4AR is built on top of VTK (an open source API for scientific visualization), so it will be possible to employ a wide range of visualization techniques in many application fields, and moreover, it is possible to interactively manipulate data-sets in order to achieve a more effective way of visualization.