Isolation from Gluconacetobacter diazotrophicus cell walls of specific receptors for sugarcane glycoproteins, which act as recognition factors

Glycoproteins from sugarcane stalks have been isolated from plants field-grown by size-exclusion chromatography. Some of these glycoproteins, previously labelled with fluorescein isothiocyanate, are able to bind to the cell wall of the sugarcane endophyte, N2-fixing Gluconacetobacter diazotrophicus, and largely removed after washing the bacterial cells with sucrose. This implies that sugarcane glycoproteins use beta-(1-->2)-fructofuranosyl fructose domains in their glycosidic moiety to bind to specific receptors in the bacterial cell walls. These receptors have been isolated by affinity chromatography on a sugarcane glycoprotein-agarose matrix, desorbed with sucrose and characterized by sodium dodecyl sulfate polyacrylamide gel electrophresisand capillary electrophoresis (CE).     

Simple and rapid micellar electrokinetic capillary chromatographic method for simultaneous determination of four antiepileptics in human serum

A very rapid and simple MEKC method was developed for the simultaneous determination of four antiepileptic drugs, ethosuximide (Etho), primidone (Pri), phenytoin (Pht) and carbamazepine (Cbz) in human serum. Sample analysis required only 100 microL of human serum which only needed to be centrifuged, decanted and combined with the running buffer [5.3 mM Na(2)HPO(4)/3.2 mM borax buffer (pH 9.5) containing 55 mM SDS and 3.5% (v/v) acetone]. The analysis was performed in only 10 min into fused-silica capillaries (57 cm total length with 50 microm i.d. and 50 cm to the detector) using the MEKC methodology with diode-array detection at 220 nm. The calibration graphs were established for ethoximide, primidone, phenytoin and carbamazepine between 0 and 20 mg/L. Recoveries were between 85 and 87%. The simplicity of the proposed methodology makes it suitable for routine clinical use, especially for epileptic patients on polytherapy.     

Organocatalytic asymmetric assembly reactions: one-pot synthesis of functionalized beta-amino alcohols from aldehydes,ketones, and azodicarboxylates

[reaction: see text] l-Proline catalyzed the enzyme-like direct asymmetric assembly of aldehydes, ketones, and azodicarboxylic acid esters to provide optically active beta-amino alcohols. This assembly reaction uses both aldehydes and ketones as donors in one pot. The aldol-derived stereocenter is formed with a reduced facial selectivity in reactions involving (R)-amino aldehydes. The reactions can be performed on a multigram scale under operationally simple and safe conditions without the requirement of an inert atmosphere or dry solvents.     

Reduction of sulfoxides with boranes catalyzed by MoO2Cl2

The first example of an organic reduction with boranes catalyzed by a high valent oxo-complex is reported. The systems catecholborane/MoO₂Cl₂(H₂O)₂ (5 mol %) and BH₃·THF/MoO₂Cl₂ (5 mol %) proved to be very efficient for the reduction of sulfoxides to the corresponding sulfides in excellent yields.     

Molecular emission cavity analysis: Part 21. Effect of Phosphoric Acid on the Determination of Sulphate

Phosphoric acid at levels above 10^-3 M depresses the S₂ emission from sulphate, but concentrations up to 0.1 M may be necessary to eliminate cationic interferences.     

Resolution of benzo[a]pyrene in complex mixtures of other polycyclic aromatic hydrocarbons. Comparison of two spectrofluorimetric methods applied to water samples

Two spectrofluorimetric methods, second-derivative constant-energy synchronous luminescence (SDCESL) and constant-wavelength synchronous luminescence (CWSL) in combination with multiple linear regression (MLR), for the quantification of benzo[a]pyrene (BaP) at sub-ng mL-1 levels, in the presence of benzo[b]fluoranthene (BbFt), benzo[k]fluoranthene (BkFt), benzo[ghi]perylene (BghiP) and indeno[1,2,3-cd]pyrene (IP), were developed and compared in detail. SDCESL presents lower limits of detection and quantification than CWSL/MLR and also gives more exact and precise results for levels close to the quantification limit. For BaP, SDCESL achieved quantification limits of 0.019 ng mL-1 in river waters and 0.007 ng mL-1 in drinking waters. This work offers a sensitive, precise, accurate, rapid, simple and economic methodology for monitoring BaP in waters for public consumption, meeting all the requirements of the EC Directive 98/83/CE that fixes the maximum admissible limit for this polycyclic aromatic hydrocarbon in drinking waters at of 0.010 ng mL-1.     

Surface stabilized nanosized Ce(x)Zr(1-x)O(2) solid solutions over SiO(2): characterization by XRD, Raman, and HREM techniques

Ce(x)Zr(1)(-)(x)O(2) solid solutions deposited over silica surface were investigated by X-ray diffraction (XRD), Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques in order to understand the role of silica support and the temperature stability of these composite oxides. For the purpose of comparison, an unsupported Ce(x)Zr(1)(-)(x)O(2) was also synthesized and subjected to characterization by various techniques. The Ce(x)Zr(1)(-)(x)O(2)/SiO(2) (CZ/S) (1:1:2 mole ratio based on oxides) was synthesized by depositing Ce(x)Zr(1)(-)(x)O(2) solid solution over a colloidal SiO(2) support by a deposition precipitation method and unsupported Ce(x)Zr(1)(-)(x)O(2) (CZ) (1:1 mole ratio based on oxides) was prepared by a coprecipitation procedure, and the obtained catalysts were subjected to thermal treatments from 773 to 1073 K. The XRD measurements disclose the presence of cubic phases with the composition Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) in CZ samples, while CZ/S samples possess Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), and Ce(0.5)Zr(0.5)O(2) in different proportions. The crystallinity of these phases increased with increasing calcination temperature. The cell a parameter estimations indicate contraction of ceria lattice due to the incorporation of zirconium cations into the CeO(2) unit cell. Raman measurements indicate the presence of oxygen vacancies, lattice defects, and displacement of oxygen ions from their normal lattice positions in both the series of samples. The HREM results reveal, in the case of CZ/S samples, a well-dispersed nanosized Ce-Zr-oxides over the surface of amorphous SiO(2). The structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic geometry and exhibit high thermal stability. Oxygen storage capacity measurements by a thermogravimetric method reveal a substantial enhancement in the oxygen vacancy concentration of CZ/S sample over the unsupported CZ sample.     

31P NMR spectroscopy as a powerful tool for the determination of enantiomeric excess and absolute configurations of alpha-amino acids

An easy method for the determination of the enantiomeric excess (ee) of mixtures of alpha-amino acids, and also for the elucidation of the absolute configuration of each component of the mixture, is reported. The method is based on the formation of diastereoisomers by reaction of the enantiomerically pure acetylacetonate derivative [Pd(acac-O,O')(P(2)-dach)]ClO(4) (4) [P(2)-dach = (1R,2R)-C(6)H(10)(NHPPh(2))(2)] with d,l-mixtures of alpha-amino acids AaH (Pd:AaH = 1:1 molar ratio, refluxing MeOH). The reaction occurs with protonation of the acac ligand and N,O-coordination of the amino acidate group, giving the corresponding [Pd(Aa-N,O)(P(2)-dach)]ClO(4) complexes l-5 and d-6. The composition of these mixtures of amino acidate complexes was analyzed by integration of the corresponding peaks (four doublets, two for each diastereomer) in their (31)P((1)H) NMR spectra. A series of 14 alpha-amino acids was studied (a, alanine; b, 2-aminobutyric acid; c, valine; d, phenylalanine; e, proline; f, leucine; g, isoleucine; h, norleucine; i, serine; j, threonine; k, methionine; l, aspartic acid; m, glutamine; n, cysteine), and excellent agreement between the expected values of ee and those obtained from integration of the (31)P((1)H) NMR spectra was obtained. Moreover, the position of the signals of each isomer is diagnostic, in such a way that the outer doublets are always due to the l-derivatives 5a-l, while the inner ones are due to the d-derivatives 6a-l, allowing the assignation of absolute configurations to each isomer in the mixture.     

The correlation of the stability constants of 1,3-dicarbonylic monochelates of Iron(III) with the acid dissociation constants of the ligand

The variation of the logrithms of stability constants of iron(III) monochelated compounds with structurally similar 1,3-dicarbonylic compounds has been found to be an essentially linear function of the negative logarithms of the acid ionization constant of the ligands. An analytical correlation which could be useful to predict equilibrium constants of iron(III) chelates has been developed. From spectrophotometric and potentiometric data a quantitative evaluation of the stability of the complex has been carried out. Results have provided information regarding substituent effects on the equilibrium constants.     

Synthesis of new colloidal formations during the strengthening of different activated hydrated metallurgical slags

This paper reports on a comparison of experimental researches on the hydration hardening of different types of dumped ferrous slag (DFS) (blast furnace, open hearth, electric steel and converter), non-activated and activated with small (2%) additions of Portland cement or lime. Activation was found to accelerate the strengthening processes in the early stages of hydration resulting from the growth of colloidal sol–gel new formations in a more alkaline environment. Over time, these formations became denser and transformed into stone-like amorphous materials with a uniaxial strength of up to 47.6 MPa at 1 year of age. All these types of slag can, therefore, be used in different applications, for example, like traditional binders, such as Portland cement, to different ceramic goods, new construction materials, etc. But till now the results of this research were used only for the preparing of binder materials for natural soils strengthening as road bases in Russia. Highways whose roadbeds were built with these DFS as binder materials have shown excellent performance indices in different parts of Russia, including Siberia and northern regions.