ICP-AES detection of silicon carbide impurities volatilized in a graphite furnace with the use of carbon tetrachloride vapour

The analytical capability of high-temperature halogenation with carbon tetrachloride vapour in a graphite furnace was investigated for silicon carbide powder with known chemical composition and particle size. Intensity vs heating time curves were determined for analytical lines of Al, B, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Ti, V and Si constituents, volatilized with and without the presence of CCl₄ vapour in the furnace atmosphere. Igniting 10 mg SiC at 2100 °C for 60 s in chlorinating atmosphere, the evaporated fraction of most of the constituents was higher than 90% (for Al about 50%). The line intensity vs sample mass (4–26 mg) relationships were linear for all impurities studied, while the intensity of silicon line showed a relatively small change with the sample mass. BEC (background equivalent concentration) values for this solid sampling technique (10 mg loaded sample) were 2–20 fold lower than those calculated for the conventional solution sample introduction method.     

Peak distortion in the column liquid chromatographic determination of omeprazole dissolved in borax buffer.

Injection of a sample containing omeprazole dissolved in borax buffer (pH 9.2) into a reversed-phase liquid chromatographic system consisting of a mixture of acetonitrile and phosphate buffer (pH 7.6) as the mobile phase and a C18 surface-modified silica as the solid phase resulted under special conditions in split peaks of omeprazole. The degree of peak split and the retention time of omeprazole varied with the concentration of borax in the sample solution and the ionic strength of the mobile phase buffer as well as with the column used. Borax is eluted from the column in a broad zone starting from the void volume of the column. The retention is probably due to the presence of polyborate ions. The size of the zone varies with the concentration of borax in the sample injected. In the borax zone the pH is increased compared with the pH of the mobile phase, and when omeprazole (a weak acid) is co-eluting in the borax zone its retention is affected. In the front part and in the back part of the borax zone, pH gradients are formed, and these gradients can induce the peak splitting. When the dissolving medium is changed to a phosphate buffer or an ammonium buffer at pH 9 no peak distortion of omeprazole is observed.     

Effect of the specific activity of the tracer on rat luteinizing hormone radioimmunoassay

Rat luteinizing hormone /LH/ was labelled with¹²⁵I by the Chloramine T method.¹²⁵I-LH, used as tracer in radioimmunoassay, was separated from the labelling reaction mixture by gel filtration. By using the proper protein/radioiodine ratio in the labelling reaction mixture the specific activity of¹²⁵I-LH was adjusted to 2.5–20.5 MBq g^–1. The influence of the specific activity on the assay parameters as well as on the tracer stability was investigated.     

Resolution of benzo[a]pyrene in complex mixtures of other polycyclic aromatic hydrocarbons. Comparison of two spectrofluorimetric methods applied to water samples

Two spectrofluorimetric methods, second-derivative constant-energy synchronous luminescence (SDCESL) and constant-wavelength synchronous luminescence (CWSL) in combination with multiple linear regression (MLR), for the quantification of benzo[a]pyrene (BaP) at sub-ng mL-1 levels, in the presence of benzo[b]fluoranthene (BbFt), benzo[k]fluoranthene (BkFt), benzo[ghi]perylene (BghiP) and indeno[1,2,3-cd]pyrene (IP), were developed and compared in detail. SDCESL presents lower limits of detection and quantification than CWSL/MLR and also gives more exact and precise results for levels close to the quantification limit. For BaP, SDCESL achieved quantification limits of 0.019 ng mL-1 in river waters and 0.007 ng mL-1 in drinking waters. This work offers a sensitive, precise, accurate, rapid, simple and economic methodology for monitoring BaP in waters for public consumption, meeting all the requirements of the EC Directive 98/83/CE that fixes the maximum admissible limit for this polycyclic aromatic hydrocarbon in drinking waters at of 0.010 ng mL-1.     

Selectivity assessment of a sequential extraction procedure for metal mobility characterization using model phases

This study considers the selectivity of the extractants used in a sequential extraction scheme for metals mobility assessment by analyzing individual mineral phases previously coprecipitated or sorbed with trace metals. The scheme evaluated was a modification of the Tessier et al. [A. Tessier, P.G.C. Campbell, M. Bisson, Anal. Chem. 51 (1979) 844] sequential procedure proposed by the authors. The phases studied were calcite, amorphous iron oxide, hausmannite, humic acid, kaolinite and illite. Selective extractions were obtained for As, Cr, Cu, Ni, Pb and Zn in metal-coprecipitated phases whereas NH(2)OH-HCl was not selective for the extraction of Hg and Cd coprecipitated in hausmannite and amorphous iron oxide, respectively. Otherwise, Cd, Hg, Ni and Zn sorbed on the different phases were released with MgCl(2) and NaOAc/HOAc, but stronger reagents were needed to release As, Cr, Cu and Pb.     

Possible Mechanisms of Intercalation

Recent knowledge of the kinetics and intercalation mechanisms are summarized and accompanied by examples of intercalation reactions of water and ethanol into anhydrous vanadyl phosphate and redox intercalation of alkali metal cations into vanadyl phosphate dihydrate. Three possible mechanisms of intercalation are presented which are based on: (i) a concept of exfoliation of layers; (ii) the formation of stages and randomly stacked layers; (iii) co-existence of intercalated and non-intercalated parts of crystals of the host separated by an advancing phase boundary. The corresponding kinetic curves are ascribed to mechanisms (ii) and (iii).     

Kinetic fluorimetric determination of nanogram amounts of manganese, based on its catalysis of the oxidation of 2-hydroxybenzaldehyde thiosemicarbazone with hydrogen peroxide

A kinetic method is described for the determination of trace amounts of manganese(II), based on its catalytic effect on the oxidation of 2-hydroxybenzaldehyde thiosemicarbazone by hydrogen peroxide. The reaction is followed by measuring the rate of change of fluorescence (lambda(ex) 365 and lambda(em) 440 nm). The calibration is linear over the manganese range 2-9 ng ml with a precision of +/-1%. The proposed method suffers from few interferences.     

Metal-directed synthesis and photophysical studies of trinuclear v-shaped and pentanuclear x-shaped ruthenium and osmium metallorods and metallostars based upon 4'-(3,5-dihydroxyphenyl)-2,2':6',2''-terpyridine divergent units

A new series of V-shaped trinuclear metallorods and X-shaped pentanuclear metallostars has been prepared by the reaction of metal complexes bearing pendant phenolic functionalities with complexes containing electrophilic ligands. Specifically, {M(tpy)2} motifs (M=Ru or Os; tpy=2,2':6',2'-terpyridine) bearing one or two pendant 3,5-dihydroxyphenyl substituents at the 4-position of the central ring of the tpy have been reacted with the complexes [Ru(tpy)(Xtpy)]2+ (X=Cl or Br) to form new ether-linked species. The energy transfer from ruthenium to osmium in these complexes has been investigated in detail and the efficiency of transfer shown to be highly temperature dependent; the energy transfer is highly efficient at low temperature, whereas at room temperature nonradiative and nontransfer deactivation of the excited {Ru(tpy)2}* domains is most significant.     

Study of zinc thiocarbamide chloride,a single-source precursor for zinc sulfide thin films by spray pyrolysis

Thermal decomposition of the title compound, Zn(tu)₂Cl₂ (tu=thiourea), was studied up to 1200°C in dynamic inert (N₂) and oxidative (air) atmospheres using simultaneous TG/DTA techniques. In addition, XRD and IR were employed ex situ to resolve the reaction mechanism and products. Cubic ZnS (sphalerite) is formed below 300°C in both atmospheres and is observed until 760°C, whereafter it transforms in nitrogen to the hexagonal ZnS (wurtzite). EGA by FTIR revealed the complexity of the decomposition reactions involving also the evolution of H₂NCN, which reacts to form hexagonal ZnCN₂ as revealed by an XRD analysis. This revised version was published online in July 2006 with corrections to the Cover Date.     

H-quadrupolar coupling-based analysis of stereochemical and regiochemical memory in the Pd-catalysed allylic alkylation of iso-cinnamyl type substrates employing the chiral monophosphine ligands ‘MOP’ and ‘MAP’

The reaction of iso-cinnamyl acetate with NaC(Me)(CO₂Me)₂, catalysed by Pd-‘MOP’ (MOP=2-methoxy-2′-diphenylphosphino-1,1′-binaphthalene) is known to proceed with a regiochemical memory effect that results in the predominant generation of the branched alkylation product. The analogous reaction employing ‘MAP’ as ligand (MAP=2-N,N-dimethylamino-2′-diphenylphosphino-1,1′-binaphthalene) proceeds with ‘normal’ regioselectivity to generate predominantly the linear isomer of product. A ²H-NMR based analysis, employing quadrupolar coupling in a chiral liquid crystal matrix, has been developed to facilitate the simultaneous study of the regiochemical and stereochemical outcome of the reaction of both enantiomers of iso-cinnamyl ester substrates in ²H-labelled but racemic samples. The analysis allows the comparison of relative rates of two competing isomerisation processes occurring in the π-allyl intermediates in the Pd-catalysed reaction, one of which facilitates asymmetric induction, the other resulting in loss of regiochemical memory. It is demonstrated that the two processes are partially coupled and that this then limits the attainment of high global enantiomeric excess in the branched product to reactions that proceed with low regiochemical retention. A key factor for the observation of high regiochemical memory is found to be the nucleophilicity of the malonate anion and the electrophilicity of the Pd-π-allyl intermediate with reduction in the reactivity of either partner resulting in the onset of substantial loss of memory.