Synthesis of N—（4—Salicylideneiminoaryl）monoaza Crown Ethers and Dioxygen Affinities of Their Cobalt（Ⅱ）Complexes

The Schiff base‐containing pendant monoaza crown ether HL¹, HL², HL³ and HL⁴ have been synthesized by condensation of salicylaldehyde with N‐(4‐aminoaryl) monoaza crown ethers, which were prepared conveniently from 4‐nitro‐N, N‐di(hydroxyethyl) aniline or 4‐nitrobenzyl chloride via cyclization or condensation and reduction. The structures of HL¹—HL⁴ were verified by ¹H NMR, IR spectra, MS and elemental analysis. Moreover, the oxygenation constants (KO2) and thermodynamic parameters (δH⁰ and δS⁰) of their cobalt(II) complexes were determined in the range of ?5 °C to 25 °C, and the effect of crown ring bonded to a Schiff base on the dioxygen affinities of cobalt(II) complexes was also observed as compared to the uncrowned analogue (CoL).     

Synthesis and Visible Spectral Behaviour of Some New N‐Bridgehead Heterocyclic Cyanine Dyes Incorporating Pyrazolo (4,5‐b) Indolizine (Benzoindolizine)

The new unsymmetrical N‐bridgehead, apo (zeromethine), mono‐methine, dimethine, meso substituted tetramethine and styryl cyanine dyes incorporating pyrazolo (4,5‐b) indolizine (benzoindolizine) nuclei were prepared. Structural confirmation was carried out by elemental analyses, IR, H‐NMR, mass spectra and ¹³C‐NMR with the aid of carbon DEPT spectral data. The visible absorption spectra for the newly synthesized cyanines were examined in 95% ethanol.     

Polymerization of methyl methacrylate by 2‐pyrrolidinone and n‐dodecyl mercaptan

The bulk polymerization of methyl methacrylate initiated with 2‐pyrrolidinone and n‐dodecyl mercaptan (R‐SH) has been explored. This polymerization system showed “living” characteristics; for example, the molecular weight of the resulting polymers increased with reaction time by gel permeation chromatographic analysis. Also, the polymer was characterized by Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR techniques. The polymer end with the iniferter structures was found. By the initial‐rate method, the polymerization rate depended on [2‐pyrrolidinone]^1.0 and [R‐SH]⁰. Combining the structure analysis and the polymerization‐rate expression, a possible mechanism was proposed. n‐Dodecyl mercaptan served dual roles—as a catalyst at low conversion and as a chain‐transfer agent at high conversion. Finally, the thermal properties were studied, and the glass‐transition temperature and thermal‐degradation temperature were, respectively, 25 and 80–100 °C higher than that of the azobisisobutyronitrile system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3692–3702, 2002     

An Integrated Theory of Adsorption and Partition Mechanism and Eash Contribution to Solute Retention in Reversed Phase Liquid Chromatography

With the combination of the the stoichiometric displacement model for retention (SDM-R) in reversed phase liquid chromatography (RPLC) and the stoichiometric displacement model for adsorption (SDM-A) in physical chemistry,the total number of moles of the re-solvated methanol of stationary phase side.nr,and that of solute side in the mobile phase,q,corresponding the one mole of the desorbing solute,were separately determined and referred as the characterization parameters of the contributions of the adsorption mechanism and partition mechanism to the solute retention,respectively.A chromatographic system of insulin,using mobile phase consisting of the pseudo-homologue of alcohols(methanol,ethanol and 2-propanol)-water and trifluoroacetic acid was employed.The maximum number of the methanol layers on the stationary phase surface was found to be 10.6,only 3 of which being valid in usual RPLC,traditionally referred as a volume process in partition mechanism.However,it still follows the SDM-R.Both of q and nr of insulin were found not to be zero,indicating that the retention mechanism of insulin is a mixed mode of partition mechanism and adsorption mechanism.When methanol is used as the organic modifier,the ratio of q/nr was 1.13,indicating the contribution to insulin retention due to partition mechanism being a bit greater than that due to adsorption mechanism.A linear relationship between q,or nr and the carbon number of the pseudo-homologue in the mobile phase was also found.As a methodology for investigating the retention mechanism retention and behavior of biopolymers.a homologue of organic solvents as the organic modifier in mobile phase has also been explored.     

Synthesis,Structure and Reactivity of [1, 2‐Bis(diphenylphosphinite)ethane]bromotricarbonylmanganese(I) with Reactions of Phosphites,Phosphonites. and Phosphinites

The manganese carbonyl complex [MnBr(CO)₃ L ] ( 1 ), where L = Ph₂POCH₂CH₂OPPh₂, was prepared by reacting [MnBr(CO)₅] with the bidentate ligand 1, 2‐Bis(diphenylphosphinite)ethane. From this compound and the appropriate phosphite, phosphinite or phosphonite ligands were synthesized the complexes [MnBr(CO)₂ LL ′], where L ′ = P(OMe)₃ ( 2 ) or P(OEt)₃ ( 3 ) and [MnBr(CO)₃ L ′₂], where L ′ =PPh(OEt)₂ ( 4 ) or PPh₂(OEt) ( 5 ). The obtained compounds have been characterized by elemental analysis, mass spectrometry, IR and NMR (¹H, ¹³C and ³¹P) spectroscopies and X‐ray diffractometry for the complexes 1 , 4 and 5 .     

Square‐Planar Carbonylchlororhodium(I) Complexes Containing trans‐Spanning Diphosphine Ligands as Catalysts for the Carbonylation of Methanol

The rhodium(I) complexes trans‐[Rh(diphos)(CO)Cl] 7 (diphos=pbpb), 8 (diphos=nbpb), and 9 (diphos=cbpb) were synthesized (Scheme 4) and used as catalysts for the carbonylation of MeOH to AcOH (Scheme 1). The trans coordination imposed by the rigid C‐spacer framework of the diphos ligands pbpb, nbpb, and cbpb, demonstrated by ³¹P‐NMR and IR spectroscopy of 7 – 9 and unambiguously confirmed by single‐crystal X‐ray structure analysis of 7 , improved the thermal stability of the rhodium(I) system under carbonylation conditions and, hence, the catalytic performance of the complexes. For the catalytic carbonylation of MeOH, the active catalyst could be prepared in situ from the mixture of [Rh(CO)₂Cl]₂ and the corresponding diphos ligand pbpb, nbpb, or cbpb, giving the same results as carbonylation in the presence of the isolated complexes 7, 8 or 9 (see Table). The highest activity was observed for complex 7 (or the mixture [Rh(CO)₂Cl]₂/pbpb, the catalytic turnover number (TON) being 950 after 15 min (170°, 22 bar).     

The Influence of Sulfate‐Doping on the Nature of V Sites in VOx/TiO2 Catalysts

EPR, UV/Vis and FTIR spectroscopy as well as thermal analysis (TA/MS) were applied to study the influence of sulfate species present in the anatase support on the specific nature of VO_x species in supported VO_x/TiO₂ catalysts. Those sulfate species modify the local structure of the supported vanadyl species and lead to the formation of two types of VO²⁺ sites instead of only one type being formed on sulfate‐free anatase. EPR and FTIR spectroscopic measurements revealed that a part of the VO²⁺ species are directly bound to the surface sulfate species. By TA/MS it was found that SO₂ is released at lower temperature from VO_x/TiO₂ in comparison to the vanadium‐free support. The direct bonding between sulfate and VO_x species stabilizes the latter on the surface of VO_x/TiO₂ resulting in three effects: 1) a higher V site dispersion in comparison to sulfate‐free TiO₂, 2) a better resistance of surface vanadyls against diffusion into the bulk of the support and 3) a much faster reoxidation of reduced V sites than observed on sulfate‐free TiO₂.     

Diastereoselective Electrophilic Amination of Chiral 1‐Benzoyl‐2,3,5,6‐tetrahydro‐3‐methyl‐2‐(1‐methylethyl)pyrimidin‐4(1H)‐one for the Asymmetric Syntheses of α‐Substituted α,β‐Diaminopropanoic Acids

The chiral compounds (R)‐ and (S)‐1‐benzoyl‐2,3,5,6‐tetrahydro‐3‐methyl‐2‐(1‐methylethyl)pyrimidin‐4(1H)‐one ((R)‐ and (S)‐ 1 ), derived from (R)‐ and (S)‐asparagine, respectively, were used as convenient starting materials for the preparation of the enantiomerically pure α‐alkylated (alkyl=Me, Et, Bn) α,β‐diamino acids (R)‐ and (S)‐ 11 – 13 . The chiral lithium enolates of (R)‐ and (S)‐ 1 were first alkylated, and the resulting diasteroisomeric products 5 – 7 were aminated with ‘di(tert‐butyl) azodicarboxylate’ (DBAD), giving rise to the diastereoisomerically pure (≥98%) compounds 8 – 10 . The target compounds (R)‐ and (S)‐ 11 – 13 could then be obtained in good yields and high purities by a hydrolysis/hydrogenolysis/hydrolysis sequence.     

Copper-assisted oxidation of catechols into quinone derivatives

Catechols are ubiquitous substances often acting as antioxidants, thus of importance in a variety of biological processes. The Fenton and Haber–Weiss processes are thought to transform these molecules into aggressive reactive oxygen species (ROS), a source of oxidative stress and possibly inducing degenerative diseases. Here, using model conditions (ultrahigh vacuum and single crystals), we unveil another process capable of converting catechols into ROSs, namely an intramolecular redox reaction catalysed by a Cu surface. We focus on a tri-catechol, the hexahydroxytriphenylene molecule, and show that this antioxidant is thereby transformed into a semiquinone, as an intermediate product, and then into an even stronger oxidant, a quinone, as final product. We argue that the transformations occur via two intramolecular redox reactions: since the Cu surface cannot oxidise the molecules, the starting catechol and the semiquinone forms each are, at the same time, self-oxidised and self-reduced. Thanks to these reactions, the quinone and semiquinone are able to interact with the substrate by readily accepting electrons donated by the substrate. Our combined experimental surface science and ab initio analysis highlights the key role played by metal nanoparticles in the development of degenerative diseases.

An antioxidant catechol transforms following intramolecular redox reactions into highly reactive oxygen species, a semiquinone and a quinone, on copper.