ISLAND—Inverse Square Law Acceleration Measurement Using iNertial Drift

By using a novel free-flying, rotating, optical bench aboard the International Space Station (ISS) as the basis for a measurement of differential acceleration between two gravitating bodies, in principle the Newtonian inverse-square law and the constant of gravitation, G, can be determined at the parts in 10⁶ level.     

Measurement of apex angle of the prism using total internal reflection

Total internal reflection technique is examined critically for the measurement of apex angle of the prism. Recognition of the critical boundary completely specifies the apex angle ‘A’ of the prism by keeping constant the ratio of refractive index of sample fluid (n₁=1.4) to that of glass (n₂=1.7). Recording of observations in the laboratory is dependent upon whether the apex angle ‘A’ of prism is greater than or less than or equal to critical angle ‘r_c’. The minimum value of error function ‘χ’ in the proximity of Abbe angle explain the choice of Abbe type instruments and shown invariant by relating positive ‘₊’ and the negative angle of emergence ‘₋’. Using ray-tracing technique, an expression for the length of the critical boundary ‘l’ is derived and is shown as a measure of the apex angle ‘A’ of the prism.

The choice of the realistic grazing condition leads us to two turning points for which error function ‘χ’ is minimal and yields appropriate option of the measurement of apex angle ‘A’ of the prism. It is further shown that the small error ‘ζ’ crept in the apex angle ‘A’ of the prism can lead to a significant error in the design of Pulfrich type instruments.

Experimental measurements are in-line with the predictions made.     

Effect of the structure of smooth copper surfaces on the accuracy of determination of the optical constants of copper

The accuracy of determination of the optical constants of smooth copper surfaces produced by different technologies is analyzed, with particular attention paid to the consideration of the influence of scattered radiation (which is ignored by many authors) on the retrieval of the optical constants of copper surfaces from reflected radiation. The neglect of scattered radiation can lead to errors as high as 50% in determining the optical constants for bulk copper. For thin films, the errors are much lower. The influence of surface oxidation during measurements in air and surface features of studied objects on the parameters to be determined is analyzed as well. It is shown that errors in determination of the constants are maximal in the plasma resonance region of copper.

     

Selective photorefractive scattering in LiNbO<Subscript>3</Subscript>:Rh crystals

Photorefractive scattering occurs in rhodium-doped lithium niobate crystals irradiated by coherent light. The photorefractive scattering has both wide-angle and selective components. The results of experimental investigation of selective photorefractive scattering in LiNbO₃:Rh crystals and calculation of the spatial structure of scattering are reported. The selective scattering is regarded as a kind of a frequency-degenerate fourwave vector interaction.     

Synthesis of broadband interference filters: II. Suppression of high reflection bands of the fourth,fifth, and sixth orders

The spectral properties of multilayer interference systems formed by multiple replication of the symmetric ternary period ABCBA are investigated. The problem of synthesis of structures with suppression of adjacent bands of high reflection of the fourth, fifth, and sixth orders among their spectral characteristics is solved. It is shown that there are only six variants of selection of the optical thicknesses of layers in a period. When the high reflection bands of the fourth, fifth, and sixth orders are suppressed, the high reflection band of the first order remains in only four cases. The values of refractive indices of layers for which the problem hasa solution are found. The refractive indices of layers in all six cases are described by different relations determining the dependence of the refractive index of one of the components on arbitrarily selected refractive indices of the other two components.     

A novel approach to the acoustic characterisation of porous road surfaces

Porous road surfaces offer an effective means of reducing the generation and propagation of noise from road traffic. However, the porosity of these surfaces can deteriorate over time, leading to a reduction in their noise reducing properties. Efficient methods are therefore required for monitoring this performance. Existing techniques for performing in-situ measurements of acoustic absorption are unsuitable for use within the traffic stream. Static measurements using time domain Maximum Length Sequence (MLS) based techniques have been demonstrated to offer advantages over traditional techniques, presenting the opportunity for measurements under dynamic conditions. This paper describes the design of a system for carrying out dynamic MLS-based measurements. Results are presented which demonstrate that stable dynamic measurements can be carried out at speeds of up to 30 km/h.     

Dielectric investigations of associate formation process in thin nitrobenzene interlayers formed between metal substrates

Studies of thickness and temperature dependencies of the dielectric susceptibility of nitrobenzene interlayers formed on conductive substrates were carried out. The obtained data were processed under the assumption of the existence of dimers (with opposite directions of molecular dipole moments) in orientationally ordered wall-adjacent layers. The results were treated on the basis of Lifshits theory.     

Ac behaviour and phase transition in PLZT 6/80/20 ferroelectric ceramics

The Ac behaviour of PLZT 6/80/20 ferroelectric ceramics was analyzed around and above the phase transition. Two relaxation processes are identified, showing that the so-called ‘universal relaxation law’ holds for the ceramics. A critical point in the values of the Ac conductivity, around the temperature corresponding to the maximum of the dielectric losses, is observed below the transition temperature due to the relaxor behaviour. The frequency dependence of the Ac conductivity at various temperatures and the hysteresis loops show classical relaxor behaviour with a diffuse phase transition.     

Activity of microemulsion-based nanoparticles at the human bio-nano interface: concentration-dependent effects on thrombosis and hemolysis in whole blood

Background: Although microemulsion-based nanoparticles (MEs) may be useful for drug delivery or scavenging, these benefits must be balanced against potential nanotoxicological effects in biological tissue (bio-nano interface). We investigated the actions of assembled MEs and their individual components at the bio-nano interface of thrombosis and hemolysis in human blood. Methods: Oil-in-water MEs were synthesized using ethylbutyrate, sodium caprylate, and pluronic F-68 (ME4) or F-127 (ME6) in 0.9% NaCl_w/v. The effects of MEs or components on thrombosis were determined using thrombo-elastography, platelet contractile force, clot elastic modulus, and platelet counting. For hemolysis, ME or components were incubated with erythrocytes, centrifuged, and washed for measurement of free hemoglobin by spectroscopy. Results and conclusions: The mean particle diameters (polydispersity index) for ME6 and ME4 were 23.6 ± 2.5 nm (0.362) and 14.0 ± 1.0 nm (0.008), respectively. MEs (0, 0.03, 0.3, 3 mM) markedly reduced the thromboelastograph maximal amplitude in a concentration-dependent manner (49.0 ± 4.2, 39.0 ± 5.6, 15.0 ± 8.7, 3.8 ± 1.3 mm, respectively), an effect highly correlated (r2 = 0.94) with similar changes caused by pluronic surfactants (48.7 ± 10.9, 30.7 ± 15.8, 20.0 ± 11.3, 2.0 ± 0.5) alone. Neither oil nor sodium caprylate alone affected the thromboelastograph. The clot contractile force was reduced by ME (27.3 ± 11.1–6.7 ± 3.4 kdynes/cm², P = 0.02, n = 5) whereas the platelet population not affected (175 ± 28–182 ± 23 10⁶/ml, P = 0.12, n = 6). This data suggests that MEs reduced platelet activity due to associated pluronic surfactants, but caused minimal changes in protein function necessary for coagulation. Although pharmacological concentrations of sodium caprylate caused hemolysis (EC₅₀ = 213 mM), MEs and pluronic surfactants did not disrupt erythrocytes. Knowledge of nanoparticle activity and potential associated nanotoxicity at this bio-nano interface enables rational ME design for in vivo applications.